Question about 2000 Toyota Camry Solara

Open Question

How to replace brake light bulb on a 2000 Solara

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: beam lights out on 2000 toyota solara

check for voltage at the lamps themselves. If no voltage is present, check headlamp relay,.Rarely it could also be the multi-function switch, but don't go there first! Also, did you try a new bulb?(s)

Posted on Dec 13, 2008

Ad
  • 35 Answers

SOURCE: brake light bulb Mitsubishi Eclipse Cars

look for access panels in rear hatch there will be one on each side remove those and there will be 10 ml nuts holding the light housings on remove those then you can access the lights

Posted on Jul 02, 2009

bunnydawg
  • 5158 Answers

SOURCE: replaced bulb on brake light on 300m & still dosnt turn on

replace the flasher relay under the dash ... not exactly sure how that affects your brake lights but should solve the flasher problem.

Posted on Feb 26, 2009

martin538
  • 117 Answers

SOURCE: brake lights wont work

Check the brake light switch which is located above the foot pedals on a metal bracket.

Posted on Apr 07, 2009

  • 1 Answer

SOURCE: brake light bulb

I have a 2000 Isuzu Rodeo and had the same problem. On the 2000, there are 2 screws on the side of the light assembly and 1 at the bottom the need to be removed. I found I needed a longer philips screwdriver for the bottom screw as there is not much room. Once you remove the screws, pull straight back on the unit. There are 2 plastic pins that are about 3/4" that will pop out of their socket when you pull straight back. Then, just lift the unit out and replace the bulb.

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Burned out brake light


You replace the brake light bulb from inside the truck.

May 30, 2012 | 2004 Toyota Solara

1 Answer

How do you replace the reverse/backup lights on an 07 toyota solara?


You should be able to access the light from inside the trunk...pull the panel back and you should see the back ot the bulbs...just look for the bulb that is aligned with the white portion of the tail light assembly and remove and replace it. should be pretty easy to get to. most of the bulbs are the same so I would remove the brake light and if it is the same, install it in the back up light slot to see if it resolves the problem. If so, go ahead and replace the bulbs. Good luck

Feb 07, 2011 | 2007 Toyota Solara

1 Answer

My brake lights will not function on my 2000 grand caravan.All of the bulbs are new my rear lights work my reverse lights work but my brake lights will not


The bulbs could still be the problem since they are double filament bulbs.If your high brake light work but not the low ones the replace the bulbs.If none in the rear work then you may need a brake light switch(on the brake pedal linkage).If this is not the case the check for power to the brake light side of the bulb and repair the broken brake light wire.

Oct 06, 2010 | 2000 Dodge Caravan

1 Answer

2000 Cherokee: brake lights out but bulb still works. fue ?...


replace bulb using twin element bulb if still no joy then check for power at bulb if ok then replace brake light switch located at brake pedal

May 05, 2010 | 2000 Jeep Cherokee

1 Answer

Problem with my 2002 toyota Solara


check to see if a fuse is blown under the hood as well as under the dash

Apr 04, 2010 | 2002 Toyota Camry Solara

2 Answers

Replaced bulb on brake light on 300m & still dosnt turn on


have you tried the tailight socket test with a test light maybe its not getting power.if so maybeits the fuse

Feb 26, 2009 | 2003 Toyota Camry Solara

1 Answer

Beam lights out on 2000 toyota solara


check for voltage at the lamps themselves. If no voltage is present, check headlamp relay,.Rarely it could also be the multi-function switch, but don't go there first! Also, did you try a new bulb?(s)

Dec 13, 2008 | 2000 Toyota Camry Solara

1 Answer

Brake light bulb wont fit


check it against the one you took out or the one from the other side and see if there are any differences. there were differences in the year 2005 and 2006 that could be enough to have you trying to install the wrong bulb. take the old one with you if you have it and show them what you need or take the other one out and compare them

Nov 16, 2008 | 2002 Toyota Camry Solara

1 Answer

Brake Lights


Braking sensor attached to the pedal or calipers ?

Suggest replacing, try google search the parts or check service manual.

Aug 10, 2008 | 1999 Toyota Camry Solara

Not finding what you are looking for?
2000 Toyota Camry Solara Logo

Related Topics:

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...