Question about 2004 Hyundai Elantra

Open Question

How do i replace a 5 wire o2 sensor with a 4 wire sensor

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 184 Answers

SOURCE: missfire

Have you replaced the coil yet? I assume by all 4 cylinders misfiring you mean P0300 Random Misfire? It could be a number of other things - a faulty fuel injector, coil, etc. Read this article for more info on random misfires - http://www.obd-codes.com/p0300

Posted on Dec 14, 2008

Ad
warlock61
  • 659 Answers

SOURCE: more 99 cougar problems

there is a fuse for the o2 heaters if one of the sensors blew the fuse they will all be out

Posted on Mar 01, 2009

  • 1 Answer

SOURCE: Replacing 2004 Hyundia Elantra O2 Sensor

Had the same problem You need to go to dealer and order an O2 sensor with California emissions. The wire will be longer and fit into the prong

Posted on May 08, 2009

Molson02536
  • 3854 Answers

SOURCE: How much does it cost to replace the O2 sensor of

Log on to Auto Zone, i believe the O2 sensor starts around $130.00 for your Odyssey. Auto Zone can also give you the step by step instructions to replacing the sensor with common tools to save your self more money. Good luck and keep me posted. Be glad to help you save some money and get your honda running 100%

Posted on Jul 15, 2009

ZJLimited
  • 17970 Answers

SOURCE: O2 code p0152 how repair replaced the sensors [4]

The O2 sensor is located on the exhausts manifold, or/and on the cat. Converter. Some cars have two.

Also, for more details, can review the Jeep ZJ Service Manual ZJ-Secc-14-Fuel-System

Check here for Reset Codes.

Good luck (remember rated this help)

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

My trooper is giving like 6 miles to the gallon its a V6 2.8 engine. I dont know where th oxygen scensor connect.


Hello! I have the wiring to your engine and perhaps a solution...The wire color from the ECM on Connector D pin #7 is White/Green and goes to the O2 sensor...The color at the O2 sensor is Black...White/Blue is connector D pin #1...wire colors that have aged are easily mistaken White looks Yellow with age...connect the O2 sensor to D-7...The O2 sensor is White/Green NOT White/Blue (which looks like Yellow/Blue) this wire is the Check Engine Connector...Tell me how many wires are either cut or misplaced? If we eliminate wiring we can concentrate on why your getting 6 miles /Gal...

If the vehicle backfires or runs poorly My next suggestions are to check the plug wires to be sure they are in the correct place...and #2 to check the timing...the left bank=1, 3, 5 and the right bank=2, 4, 6...Firing order is1, 2, 3, 4, 5, 6...CCW on the distributor...Stick with me and we'll have it purring. see timing below...
saailer




11_9_2011_11_53_11_am.gif

Jul 14, 2011 | 1990 Isuzu Trooper

Tip

How to Replace the O2 Sensor in Mercury villager?


O2 sensor needs to be replaced when you get low gas mileage in car.
The procedure to replace is as follows: ----
1) There is primary and secondary O2 sensor connector.
2) Do the replacement of the O2 sensor only when the engine is completely cool.
3)You will see primary O2 sensor on the exhaust manifold.The secondary O2 sensor is located after the catalytic converter.
4)Put the car on jack stands on the rack, this will give you proper sensor location in the car.
5)Remove the O2 sensor with a socket wrench and O2 removal tool extension. Turn the O2 sensor counterclockwise to remove.
6) Most of the times the O2 sensor comes out very easily but if its bit hard to remove it then you can use "FREEZE spray" to make it gets loose.
7)The spray will make it come out easily.
8)When the O2 sensor is getting removed, some of the wiring's will also come out.
9)Before removing the O2 sensor, take the note of the wiring's and the position of wiring so while inserting new O2 sensor you don't get confused.
10) Now after you remove the old faulty O2 sensor out. Carefully insert new O2 sensor in same position.
11) And reverse/refit all the wires / parts which you removed while replacing the old O2 sensor.
This will help. Thanks.

on Mar 22, 2010 | Mercury Villager Cars & Trucks

Tip

How to Replace the O2 Sensor in a Buick Century Car?


O2 sensor needs to be replaced when you get low gas mileage in car.
The procedure to replace is as follows: ----
1) The oxygen sensor is located under the car.
2) Put the car on jack stands on the rack, this will give you proper sensor location in the car.
3) The sensor has to be turned a bit then it can be easily removed.
4) Most of the times the O2 sensor comes out very easily but if its bit hard to remove it then you can use "FREEZE spray" to make it gets loose.
5) The spray will make it come out easily.
6) When the O2 sensor is getting removed, some of the wiring's will also come out.
7) Before removing the O2 sensor, take the note of the wiring's and the position of wiring so while inserting new O2 sensor you don't get confused.
8) Now after you remove the old faulty O2 sensor out. Carefully insert new O2 sensor in same position.
9) And reverse/refit all the wires / parts which you removed while replacing the old O2 sensor.
This will help. Thanks.

on Mar 22, 2010 | Buick Century Cars & Trucks

2 Answers

How to replace oxygen sensor


At Autozone, Oreilly's, NAPA, etc, you will need to buy an O2 sensor socket. This looks like a normal socket but it's longer and has a slot running 3/4 of the way down one side. This slot is to hold your wiring harness to the side as you unscrew the O2 sensor.

First, be sure you're working on the right O2 sensor. Any auto parts store can diagnose this and get you the exact one. Many cars now have 2-4 or even more O2 sensors. Now, when they diagnose it they may say it's the front 'left bank' sensor or some other car lingo talk. Just let them point out to you which is the one causing your check engine light to come on so you know for sure. Also be sure you're buying the right O2 sensor wrench. I believe there are 3 or 4 sizes.

I dont do this, but most manuals would now tell you to disconnect your battery. Once its disconnected, find the O2 sensor in question and disengage the wiring harness. Just look it over until you see how it works, push down the plastic tab and it will pop right out. Now you'll have an O2 sensor sticking out of your exhaust with a wiring harness hanging on it. Use some PB Blaster to penetrate the threads and it will come out much easier. With O2 socket, remove. Replace. Reconnect harness. Reconnect battery. Fixya!

P.S. - I had a Ford Bronco that would constantly (every 3-6 months) show a check engine light and the RPMs would bounce back and forth when I started it. Turns out it was the O2 sensor. After replacing a few, an old mechanic told me to take it out and place the sensor end in acetone or gasoline for about 5 - 10 minutes. (not fully submerged, only the business end) Once you take it out, you can brush it off with a hard nylon or light metal brush, then repeat. Once the acetone has dried off, replace O2 sensor using steps above. Disconnect battery for a few minutes to clear the check engine code. Now, some say this doesn't work, but I can tell you from experience it definitely can. And, if the sensor is already showing bad, you could save $30-$120 depending on the cost of the O2 sensor.

Good luck!

Good luck!

May 01, 2011 | 2004 Buick LeSabre

Tip

How to Replace the O2 Sensor in a Audi All road Car?


O2 sensor needs to be replaced when you get low gas mileage in car.
The procedure to replace is as follows: ----
1) The oxygen sensor is located under the car.
2) Put the car on jack stands on the rack, this will give you proper sensor location in the car.
3) The sensor has to be turned a bit then it can be easily removed.
4) Most of the times the O2 sensor comes out very easily but if its bit hard to remove it then you can use "FREEZE spray" to make it gets loose.
5) The spray will make it come out easily.
6) When the O2 sensor is getting removed, some of the wiring's will also come out.
7) Before removing the O2 sensor, take the note of the wiring's and the position of wiring so while inserting new O2 sensor you don't get confused.
8) Now after you remove the old faulty O2 sensor out. Carefully insert new O2 sensor in same position.
9) And reverse/refit all the wires / parts which you removed while replacing the old O2 sensor.
This will help. Thanks.

on Mar 22, 2010 | Audi AllRoad Cars & Trucks

Tip

How to Replace the O2 Sensor in a Chevrolet Cavalier Car?


O2 sensor needs to be replaced when you get low gas mileage in car.
The procedure to replace is as follows: ----
1) The oxygen sensor is located under the car.
2) Put the car on jack stands on the rack, this will give you proper sensor location in the car.
3) The sensor has to be turned a bit then it can be easily removed.
4) Most of the times the O2 sensor comes out very easily but if its bit hard to remove it then you can use "FREEZE spray" to make it gets loose.
5) The spray will make it come out easily.
6) When the O2 sensor is getting removed, some of the wiring's will also come out.
7) Before removing the O2 sensor, take the note of the wiring's and the position of wiring so while inserting new O2 sensor you don't get confused.
8) Now after you remove the old faulty O2 sensor out. Carefully insert new O2 sensor in same position.
9) And reverse/refit all the wires / parts which you removed while replacing the old O2 sensor.
This will help. Thanks.

on Mar 22, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Replacing 2004 Hyundia Elantra O2 Sensor


Had the same problem You need to go to dealer and order an O2 sensor with California emissions. The wire will be longer and fit into the prong

Apr 19, 2009 | 2004 Hyundai Elantra

1 Answer

I need to replace o2 sensor in 2000 vw passat. How much will it cost me to fix this problem?


depending on which engine you have. 4cly.the part is about $210 and one has 4 wires and one has 5 wires located either in front or behind cat. converter.... On 6 cly. some have 1- O2 sensor some have 2- O2 sensors depending when car was made that year and the part is about $160 each..

Nov 29, 2008 | 2001 Volkswagen Passat

Tip

Where is O2 oxygen sensor Bank 1 sensor 2 on Pontiac Atzec.


Hi.


The sensor two is the one located after the catalytic converter. While sensor one is always the O2 sensor located on the engine side.


Bankone refer to the sensor located in line with cylinder number one (theone that is sparking first i order). The firing order on Pontiac Atzec is as follows:

on the 4 Cylinder engine : 1-3-4-2

on the 6 Cylider version : 1-6-5-4-3-2,

This means that the cylindernumber one is located on the left hand side.

See the diagram below explaining how to access sensor two. The protective cover is not present on all models:



29fe35b.gif


Note: before replacing the O2 sensor (lambda sensor) ensure that the problem is not wiring or connector.


.

on Feb 21, 2010 | 2001 Pontiac Aztek

Not finding what you are looking for?
2004 Hyundai Elantra Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...