Question about 2000 Volvo S40

1 Answer

Do you have to remove the engine to replace the oil pan?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 2,984 Answers

This is what the tech data says to remove the pan:

  • Drain the engine oil
  • Remove or disconnect the following:
    1. Oil dipstick tube
    2. Turbo charge air pipe, if equipped
    3. Turbo air intake pipe, if equipped
  • Raise and support the engine.
  • Remove or disconnect the following:
    • Lower engine cover
    • Front air baffle
    • Oil filter
    • Front wheel
    • Lower ball joints nuts
    • Anti-roll bar links from the anti-roll bar
    • Right-hand axle shaft center bolt
    • Steering gear
    • Front engine mounting bolts
    • Torque rod including the mounting in the sub-frame
    • Wheel spindles
    • Oil pipe for the steering gear from the snap fasteners along the sub-frame
    • EVAP canister hose
    • Fuel line for the engine block heater, if equipped
    • Negative ground cable bracket
    • Heated oxygen (HO2) sensor connectors
  • Lower the sub-frame slightly.
  • Remove the following:
    • Oil cooler
    • Oil pan
  • Posted on Jun 02, 2010

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Ad

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    2 Answers

    How to remove the oil pan easy and safe from a 2005 crv honda


    Hi Evelyn.here's a link on your oil pan removal,it says engine removal,will send a link on that too. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Here's the engine removal guide. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

    May 17, 2015 | 2005 Honda CR-V

    1 Answer

    Replacing oil pan gasket 1998 chevy silverado 305 cu.in.


    REMOVAL PROCEDURE
    1. Remove the oil level indicator tube.
    2. Raise the vehicle.
    3. Remove the engine oil and the engine oil filter.
    4. Remove the oil filter adapter.
    5. Remove the starter.
    6. Remove the flywheel inspection cover.
    7. Remove the engine mount through bolts.
    8. Raise and support the engine.




    1. Remove the oil pan nuts and bolts. Note the location of any studs to assist reassembly.
    2. Remove the engine oil pan and the gasket.
    3. Clean all sealing surfaces. Refer to Oil Pan Clean and Inspect under Engine Unit Repair.
    INSTALLATION PROCEDURE


    1. Install the engine oil pan and a NEW gasket. Refer to Oil Pan Installation under Engine Unit Repair.
    2. Lower the engine onto the mounts.
    3. Install the engine mount through-bolts.
    4. Install the starter.
    5. Install the flywheel inspection cover.
    6. Install the engine oil filter and the engine oil.
    7. Install the oil filter adapter.
    8. Install the oil level indicator tube.

    May 04, 2015 | 1998 Chevrolet Chevrolet silverado

    1 Answer

    How do I change oil pan gasget


    Jack up truck for safety sake put jack stands under frame . remove all engine oil remove all bolts holding oil pan on if their is not enough room to drop pan you may have to remove bolts holding motor mounts and jack up engine. if front end linkage is still in the way remove linkage. pull oil pan out. check gasket that was between block and oil pan if any stuck to block of engine remove with gasket scraper or wire brush or wire wheel on drill.make sure mating surface is clean put new gasket on new oil pan I like to use a high temp sealer on gasket both sides. Put pan with gasket back in place of old oil pan and tighten all bolts. jack engine down ,replace moter mount bolts replace any linkage you took apart. and dont forget to replace engine oil. make sure oil plug is in pan before pouring oil in . before starting engine check that no oil is leaking than start engine and check for any leaks again if all is good your done. if this was helpful please leave good feed back. A good temp fix on a rusted oil pan is JB weld make sure no oil is on pan clean with towel and rubbing alchol .you may have to drain oil first. if it is rusted badly you may have to use a wire brush on a drill to clean the area to patch. if patched properly it may last for years.

    Oct 17, 2014 | 2000 GMC Sierra

    1 Answer

    Oil pan


    Hi Gerti ,
    It is very easy , First lift the vehicle through jack or hydraulic lift and drain the engine oil in a pan and arrange a new engine oil filter and oil as it is better to replace( u can use the same if it is not very old). U can drain the oil by removing the drain plug ( keep it for around 1 hour so that oil from the gallerias also drain out).
    After 1 hour remove the oil pan by removing all the bolts from engine and replace with the new one.
    Top up the engine oil by removing the dip stick and your car must be fine.
    Thanks

    Apr 27, 2014 | Chrysler Pacifica Cars & Trucks

    3 Answers

    Need to replace oil pan gasket for 1996 Ford F-150 2wd, I-6


    Yes you can do it yourself.
    Its not very easy,but with basic Auto repair tools the task can be easily completed.

    =========
    There are few help links with solutions to complete these task.
    I suggest you to refer these links and view its procedure.

    -------
    Click the link below:----
    ------------
    How to Replace an Oil Pan Gasket?
    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pan-gasket.html
    -----------

    KIA Sportage leaking oil from oil pan?

    Go to Newly Launched

    FREE Car repair gu
    obyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html" http://howtobyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html
    ----------------
    Oil pan Gasket on 1998
    Toyota Tercel?
    http://howtobyme.blogspot.com/2011/11/oil-pan-gasket-on-1998-toyota-tercel.html

    -------------
    VALVE COVER GASKET REMOVAL GUIDE http://technoanswers.blogspot.in/2012/06/valve-cover-gasket-removal-guide.html
    --------- Car oil leaks from valve cover gasket? http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

    ------------
    How to replace Oil Pan on 2008 Honda Odyssey?

    http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pan-on-2008-honda.html

    -----------
    How to replace Oil Pressure Sensor on 2008 Honda Odyssey?

    http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pressure-sensor-on.html

    ------------
    2004 Chevrolet Express Van: Oil pressure sending unit replacing? http://whoisbyme.blogspot.in/2012/06/2004-chevrolet-express-van-oil-pressure.html
    -------------
    HOW TO REPLACE AN OIL PUMP
    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pump.html
    -------------
    HOW TO CHANGE ENGINE OIL AND FILTER
    http://schematicsdiagram.blogspot.com/2011/07/how-to-change-engine-oil-and-filter.html
    --------------
    HOW TO REPLACE AN OIL PRESSURE SWITCH (SENSOR)
    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pressure-switch.html


    -------------

    How to Check Differential Oil Leaks and Replace Oil
    http://schematicsdiagram.blogspot.com/2011/07/how-to-check-differential-oil-leaks-and.html
    -----------
    HOW TO PERFORM A BASIC ENGINE TUNE UP-OIL CHANGE
    http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up-oil.html

    ----------
    HOW TO RESET OIL CHANGE INDICATOR? http://whoisbyme.blogspot.in/2012/07/how-to-reset-oil-change-indicator.html

    ------------
    These details will help.
    Thanks.

    Nov 25, 2012 | Cars & Trucks

    1 Answer

    I am trying to drop the oil pan on a 2004 V6 Alero, having trouble getting to bolts on the side of the il pan. I have heard that the engine may have to be raised? I have gotten ten of the twelve pan b


    For more oil and oil pump details check out the direct links below: ---

    How to Replace Oil Pan on car?
    http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-oil-pan-on-audi-a4-and.html
    --------
    How to Replace an Oil Pan Gasket?
    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pan-gasket.html
    -----------
    HOW TO REPLACE AN OIL PUMP
    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pump.html
    ----------
    HOW TO CHANGE ENGINE OIL AND FILTER
    http://schematicsdiagram.blogspot.com/2011/07/how-to-change-engine-oil-and-filter.html
    ----------
    HOW TO REPLACE AN OIL PRESSURE SWITCH (SENSOR)
    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pressure-switch.html
    -----------
    How to Check Differential Oil Leaks and Replace Oil
    http://schematicsdiagram.blogspot.com/2011/07/how-to-check-differential-oil-leaks-and.html
    ----------
    HOW TO PERFORM A BASIC ENGINE TUNE UP-OIL CHANGE
    http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up-oil.html

    -------


    Oil pan Gasket on car?
    http://howtobyme.blogspot.com/2011/11/oil-pan-gasket-on-1998-toyota-tercel.html

    ---------

    Oil pressure for car?

    http://schematicsdiagram.blogspot.com/2011/12/oil-pressure-for-2001-gmc-jimmy-v6.html

    ----------
    How to replace Oil Pan on car?

    http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pan-on-2008-honda.html

    ---------
    How to replace Oil Pressure Sensor on car?

    http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pressure-sensor-on.html

    -----------
    How to replace Oil Pump on car?

    http://howtobyme.blogspot.com/2011/12/how-to-replace-oil-pump-on-2008-honda.html

    ----------
    Car oil leak?

    http://schematicsdiagram.blogspot.com/2011/12/car-oil-leak.html

    ----------
    Car oil leaks from valve cover gasket?

    http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

    ----------
    Oil light blinks on dashboard?

    http://schematicsdiagram.blogspot.com/2011/12/oil-light-blinks-on-dashboard.html

    -----------
    Oil pressure issues on car?


    http://repairhelpcenter.blogspot.com/2012/01/oil-pressure-issuers-on-toyota-tundra.html

    -----------
    Oil leaks from air filter on ford?

    http://technoanswers.blogspot.com/2012/01/oil-leaks-from-air-filter-on-ford.html

    ---------
    Wire running from oil pan to alternator?

    http://technoanswers.blogspot.in/2012/02/wire-running-from-oil-pan-to-alternator.html

    --------------
    Why car leaks oil from oil filter?

    http://schematicsdiagram.blogspot.in/2012/02/toyota-camry-leaks-oil-from-oil-filter.html

    ------------
    Why engine is consuming lots of oil?

    http://schematicsdiagram.blogspot.in/2012/02/2008-scion-xb-24l-engine-is-consuming.html

    -----------
    Maint REQD message on car dash?

    http://schematicsdiagram.blogspot.in/2012/02/maint-reqd-message-on-2008-lexus-rx350.html

    ------
    Remove Sump oil pan?

    http://repairhelpcenter.blogspot.in/2012/03/remove-volkswagen-sump-oil-pan.html

    --------
    Sump not coming OFF?

    http://repairhelpcenter.blogspot.in/2012/03/sump-not-coming-off.html

    -----------
    How to remove the sump on car? http://repairhelpcenter.blogspot.in/2012/03/how-to-remove-sump-on-vw-beetle.html

    ----------
    Car oil sump removal diagram?

    http://repairhelpcenter.blogspot.in/2012/03/volkswagen-beetle-oil-sump-removal.html

    ---------

    This will help.

    Thanks.


    Feb 13, 2012 | 2004 Oldsmobile Alero

    3 Answers

    The car is leaking oil and the mechanic said it was because there is a whole in the oil pan and it will cost 1800 to fix. can i buy another oil pan and put it on myself?


    OIL PAN
    REMOVAL
    Drain engine oil.
    Remove front engine mount bracket.
    Remove power-train bending strut.
    Remove structural collar from oil pan to trans-axle Structural Collar - Removal and Installation
    Remove trans-axle lower dust cover.
    If equipped with air conditioning, remove oil filter and adapter.
    Remove oil pan.
    Clean oil pan and all gasket surfaces.
    INSTALLATION
    Apply Mopar® Silicone Rubber Adhesive Sealant or equivalent at the oil pump to engine block parting line Oil Pan Sealing
    Install a new oil pan gasket to pan.
    Install pan and tighten screws to 12 N·m (105 in. lbs.)
    Install oil filter and adapter.
    Install trans-axle lower dust cover.
    Install power-train bending strut.
    Install front engine mount and bracket
    CAUTION: The torque procedure for the structural collar must be followed, as damage to oil pan or collar could occur.

    Install the structural collar Structural Collar - Removal and Installation using the following 3 step torque sequence:
    Step 1: Install the collar to oil pan bolts and tighten to 3 N·m (30 in. lbs.)
    Step 2: Install collar to trans-axle bolts and tighten to 108 N·m (80 ft. lbs.)
    Step 3: Final torque the collar to oil pan bolts to 54 N·m (40 ft. lbs.)
    Fill engine crankcase with proper oil to correct level.

    Auto Zone carries the Oil pan you need for around $75.00 and they will have the step by step instructions for you to replace the oil pan. will take just over 2 hours for the average person. Good luck and keep me posted.

    Nov 30, 2009 | 2002 Dodge Neon

    3 Answers

    Replace oil pump


    Oil Pump is in the oil pan.. You would have to take the pan out. To get the pan out you either have to raise the motor up or remove crossmembers.

    Mar 23, 2009 | 1984 Toyota Celica Supra

    3 Answers

    Oil Pan Gasket Replacement - How to - GMC Yukon 2000


    No big job Really. Just locate your Drain Plug for the Oil. Thepan is right there, Remove the Bolts around the Pan and Remove. You will lose all of your oil so, Have something there to catch it all. Clean it all around the Edges of the Block where the Pan mounts with Degreaser and Make sure that you Scrape the Old Gasket off of Both the Block and the Pan. Run a Thin Bead of Blue ATV Silicone around the Pan Edge, Lay the Gasket on top of this Silicone. Put another Thin line on top of the Gasket and Reinstall. This Silicone is High Temp Silicone and will Seal Very Well. Make sure to put oil Back in the Motor! Please Rate my Response, I need all the Help That I can Get! Thanks!

    Jan 27, 2009 | 2000 GMC Yukon

    2 Answers

    Steps t0 change engine oil


    Remove protective bottom plastic cover under engine to gain acces to oil pan plug at the back of oil pan. Remove oil pan plug, drain old oil; replace oil filter. Replace plug and fill with oil. Replace plastice guard ubder engine.

    Jul 26, 2008 | 2002 Volkswagen Jetta TDI

    Not finding what you are looking for?
    2000 Volvo S40 Logo

    133 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Volvo Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8270 Answers

    Are you a Volvo Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...