Question about 1987 Jeep Comanche

2 Answers

Need diagram for serpantine belt and how to get belt back on after replacing the water pump

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers



here it isneed diagram for serpantine belt and how to get - 4f3c225.jpg

Posted on Jun 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

CLICK HERE since you have not indicated the installes accessories - It shows every possible combination.

To install the new belt - the alternator is adjusted to make slack - and then re-tensioned. Without a belt tensioner - allow approx 1/4" deflection in the longest run of the belt.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Jun 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a diagram of how to replace serpentine belt on 2011 ford f350 6.7 diesel


I would check underside of hood or radiator core support, they usually have a sticker with a diagram of how to do that, unless somebody peeled it off.

Feb 19, 2015 | Ford Cars & Trucks

1 Answer

Serpantine belt diagram 2000 sienna


For serpentine belt replacing and diagram details,click the link below:----http://schematicsdiagram.blogspot.com/2011/12/2000-toyota-sienna-serpentine-belt.html
---------This will help.Thanks.helpmech.

Dec 18, 2011 | 2000 Toyota Sienna

1 Answer

I need a serpantine belt diagram for a 2000 mercedes benz s430


I need to see a diagram for putting the serpentine belt back on for a 2000 S430 Mercedes

Feb 22, 2011 | 2000 Mercedes-Benz S-Class

3 Answers

My air conditoning compressor is making a grinding noise and it hasn't worked for years. Is there a way to change the pully on the water pump and just put a new serpantine belt on to bypass the compressor?


What engine?

They make a pulley adapter to install in the place of the a/c compressor for vehicles that the a/c con not be bypassed. You local auto parts store will have them. Sometimes they cause more problems than they solve.

The best solution is to replace the compressor with a new or even a used compressor.

Jan 11, 2011 | 1999 Buick Century

1 Answer

Diagram for installing serpantine belt on 2000 bwm z3 2.8


Here's a link to the diagram you've requested. Best of luck.
Greg

2000z3

Jul 01, 2009 | 1996 BMW Z3 Roadster

1 Answer

2001 Dodge Intrepid Serpantine


Loosen the tensioner pulley adjusting bolt under the power steering pump.

May 23, 2009 | 2001 Dodge Intrepid

1 Answer

Serpantine belt broke


there is usally a diagram on either the hood or the radiator core support. now to loosen something there is a idler pulley with a 3/8" drive end in the center of it that will allow you to move the pulley against the tensioner to put the belt on

Apr 12, 2009 | 1990 Cadillac Deville

1 Answer

How to install serpantine belt on a 1995 Jeep Cherokee 6-cylinder


Hi there. Here is a Step by Step guide that will help you replace your serpentine belt.




Step1 Find the belt tensionermag-glass_10x10.gif pulley. The tensioner pulley is generally between the crankshaft and a component toward the top of the hood area. Step2 Check the belt routing so you know how to replace the belt. You may be able to find a belt routing diagram on a decal on the fan shroud or in support documentation. Otherwise, make you own sketch for reference. Step3 Rotate the belt tensioner pulley, using the wrench, to and relieve tension on the belt. Step4 Slip off the old belt and slowly release the tensioner pulley. Step5 Use your belt routing diagram to put the new belt onto all of the pulleys. Pay close attention to the water pumpmag-glass_10x10.gif pulley, as incorrect routing can cause the water pump to run backwards and overheat. Step6 Make sure the belt is correctly routed and seated on all pulleys. Rotate the tensioner again to allow for the belt to slip onto all pulleys and then release the tensioner again to regain correct tension on the belt.

Please rate and god bless.


Mar 25, 2009 | 1995 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...