Question about 2002 Ford F250 Super Duty SuperCab

1 Answer

When hooked to trailer the turn signals do not work or brake lights, all other lights working

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Hi: You Might want to Check and make sure your Trailer Plugs are wired right,1-Could be wrong to Cause the Both the Truck and Trailer Lights (Brake and Signal) not to Work Correctly,Make sure you Have a Good Ground on Both . My guess is a Wire has Either gotten Corroted or Has Pulled out of 1- Of your Trailer Pugs. Hope this helps You.Let me Know By Voting on How Helpful my Solution Was.And You can Also Leave a Testamony; From the WYOCWBOY

Posted on Jun 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 GMC Envoy and I am having a problem with my passenger turn signal on my boat trailer. The brake lights and parking light work fine. The lights are LED. I have tested the plung on the...


is trailer lite fixture grounded good try and wiggle fixture when u hit signal. next try wiggle pig tail on trailer , still no signal. it must be wire from truck, trace back to connection and check all splices. to see if signal light works on trailer unhook pigtail and get a battery charger or another battery, connect a jumper from positive side to signal spot on trailer hook up. hook up ground as well see if light works if not its in the truck for sure.

Apr 01, 2011 | GMC Envoy Cars & Trucks

1 Answer

Hi, I had a hitch installed on my tucson 4 years ago at uhall.tried hooking up trailer yesterday for the first time but all lights wont work.park lights find.signal lights and break lights won,t work.if i...


yes it sounds like the converter is no good,the converters purpose is, when you have a trailer it uses the brake and signal on the same bulb, so if you were to step on the brake and have the left signal on, then the left brake light would turn into the signal,on your truck it has sperate lights for signal and brake, the converter converts this into one light for the trailer, so just replace the converter and everything should work fine, hope this helps.

Apr 08, 2010 | 2005 Hyundai Tucson

1 Answer

When I hook up to a trailer, the left turn signal and the left brake light won't work. I have tried several trailers with the same results. I own a 2003 gmc 3/4 ton pickup. I have two places to connect the...


it sounds like either the wires controling the left brake light and turn signal are borken or loose on your truck. or there could be a problem with the ground for the trailer hookup. you should take a volt meter and then have someone put the brake on and test at the hook on the truck side to see if you are getting any voltage there and do the same thing with the turn signal. if you do not have any voltage there you need to trace the wires back up into the truck to find where you do have voltage . you may find a broken wire as you go. How many wires are there in your trailer hook up?

Sep 22, 2009 | 2000 GMC Sierra

1 Answer

All lights work and brake light at top works. brake lights on bottom left and right don't work. It was hook up to trailer wires connection. going down the road and when you turn on the right turn signal...


Check a few things...
- The bulbs
- Check for ground at brake lamp connectors
- Check your wiring at the connectors for power
- Check for another fuse blown
- Do not hook up the trailer until you fix the ground problem on the trailer
- On some models, there is a module to control the rear/trailer lighting system. There may be a problem in the module.

Jul 24, 2009 | 2000 GMC Safari

1 Answer

Brake and turn signal lights stopped working on my 1996 Ford E150


You might have cut a wire or it could have broken or disconnected. Try tracing the wiring where you hooked up the trailer you may find one broken or disconnected.

Mar 26, 2009 | 1996 Ford Econoline

1 Answer

Hooked my 2007 Sprinter camping trailer to the factory lights/brakes hook-up located below bumper of my 2005 Silverado 4x4 extended cab truck. Everything works fine except for the right trailer turn...


Is this a 4 way or 6 way connection system? If your truck is wrong, then all factory equipped trailer package harnesses would be wrong, tell your trailer guy...I don't think so.
Is this the first trailer you have hauled?
Let me know, and we will go from there.
REgards,

Mar 10, 2009 | 2005 Chevrolet Silverado

1 Answer

No left brake light on trailer when hooked up to truck.


I had the same problem but when i tested the left turn signal then tested the brakes both brake lights would then work.

Feb 28, 2009 | 2003 GMC Sierra 1500

1 Answer

Tow plug


I take it the blinkers and brake lights work ok when not hooked up to the trailer? If yes, then the wiring to the tow hitch is not hooked up correctly. How many wires to trailer pig tail connection? U can have up to 7 depending on what you tow. Check to make sure these wires are hooked up from the truck to tow plug correctly: 7 wired---
brown-Rt turn and brake light, yellow-backup, white-ground, blue-electric brake, green-tail running lights, black-battery charger, red-left turn signal and brake light. Let me know if u have something other than 7 wire, I'll get the wiring color and source info for u.



Nov 25, 2008 | 1998 Ford F150 Regular Cab

1 Answer

2001 Sportage Trailer wire connections


brown to the tail lights. yellow to left turn signal. green to right turn signal. this is a basic 3 wire hook-up i use all the time w/4wire connectors for all trailers. white wire is not used. ground is established when you hook to the ball.
to find the correct wire to splice to, use a testor (has a clip to the bare wire, and a sharp point to the truck frame). using a needle, push it through a wire to rear light harness. turn on the turn signal. check if the connection is the blinker, testing until you have the blinker wire. the tail lights can be attached to the license plate wire. brakes and blinkers use same wire, so brake lights will work whenever the turn signal is attached.
to be sure everything is working right, have a second person go inside the truck and work the signals, brakes and lights one at a time while you are at the back of the trailer telling what to do.

Oct 24, 2008 | 2001 Kia Sportage

2 Answers

2003 denali trailer wiring


If your signals & brakes are on 2 different circuits, ( for example a red lens for stop & an Amber for turn.) then you'll need to buy a converter that goes between vehicle & trailer. They're not too expensive at any trailer or RV place. I think some of the autoparts stores stock them now too.

Jun 20, 2008 | 2004 GMC Sierra Denali

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...