Question about 1989 Jeep Comanche

2 Answers

I want to change my 1989 2wd comanche into a 4wd? how do i do this and can i use a cherokees parts? i have a 4.0L

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

If u want to change it to a 4x4 u need front drive line. and it bolts to a transfer case. u need to get one special ordered, u could use a cheokee tranny that has 4 wheel drive and bolt it on to the back of the motor. make sure that the bell housing has the same kind of bolt pattern that the back of the motor has.

Posted on Jun 02, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'd like to install a Grand Cherokee V8 engine into my 1989 Jeep 4X4 Jeep Commanche, how do I do it??

Posted on Aug 10, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: i have a 94 grand cherokee with a 4,0l that surges

check for vacuum leaks make sure throttle bodygasket is not broke and inplace and check fuel pump pressure.

Posted on Apr 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 96 jeep cherokee will crank but will not turn over?


????.. Do you mean it will turn over but NOT crank and run?
Do you have at least a 1/4 tank of gas..??
When/how did this start... all of a sudden,, started doing it occasionally?.. Have you had anyone (mechanic) look at it yet? Megan, there is not a way to diagnose your problem without A LOT more information.
Jeep Cherokee Workshop Owners Manual Free Download
http://www.rockauto.com/.../jeep,1996,cherokee,4.0l+l6,1180314,literature,repair+manual,
https://www.amazon.com/Cherokee-Wagoneer-Comanche...Manuals/dp/1563922150
Jeep Cherokee Cherokee Comanche Wagoneer Limited 2WD 4WD petrol 84 01...
Advance Auto Parts Down for Maintenance
Haynes Repair Manual Technical Book 50010 Read Reviews on Haynes 50010

Jul 09, 2017 | Jeep Cherokee Cars & Trucks

2 Answers

I have a 93 jeep Cherokee, it will move in 4wh and in 4wl but will not go back into 2wd?


Hello guy
try posting what 4wd system you have,? first.
command trac or select track, (the latter is full time)
part time or the full time system,
we cant guess it....
read the operators guide first, if a part time system only
as i suspect, stop driving on dry pavement.
it's only for ice, or dirt. part time. part time is not a full time system.
Command-Trac
shifting to 4wd on dry (means no ice) pavement causes, drive line wind up! and the gears to lockup. (see steering get tight in turns?> and is dangerous to drive it like this , you, me and the box)
posted here 100s of times.

http://www.rubicon-trail.com/4WD101/driveline-bind.html


the non grand Cherokee. early

had these choices
  • 1987-2001: New Process NP231 Command-Trac, part-time only, 2.72:1 ratio with low range
NP231 has the following settings: 2HI, 4HI, N, 4LO
  • 1987-2001: New Process NP242 Selec-Trac, full-time or part-time, 2.72:1 ratio with low range
NP242 has the following settings: 2HI, 4 full-time, 4 part-time, N, 4LO


as you can see you need to first know, what NP box you have or
photo your shift lever for 4wd, an post it and we tell you.

more facts, on select trac. (totally unlike command trac)
Selec-Trac locking hub is used on 4WD Cherokee. Selec-Trac
utilizes a non-disconnect front axle. Engagement of 2WD or 4WD is
accomplished at transfer case by means of mechanical shift linkage.
System allows full or part time 4WD. Selec-Trac can be shifted into
2WD or 4WD modes from inside the vehicle at any speed.
unquote
next from the service manual,
4WD TO 2WD
1) Place mode select switch in 2WD position. Transfer case
should shift to 2WD and not allow shifting into 4WD or LO range. Axle
should shift after transfer case shifts.
2) To determine if front axle has completed a shift out of
4WD into 2WD, position mode select switch back to 4WD position while
operating vehicle at slow speed. If vehicle shifts into 2WD, axle will
ratchet. If shift is not completed, transfer case will shift into 4WD
and hissing sound will come from mode select switch.
end quote.

if unsure read the FSM book its free.
shows you both systems and how to diagnose it.

in the box, click Cherokee,,then click 1993, and behold.
the real deal.

http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service

4e7ebed4-9c81-4927-b26e-02808a82acff.jpg

May 10, 2016 | Jeep Cars & Trucks

1 Answer

How to adjust the headlights on an 86 jeep Comanche


How to adjust the headlights on an 86 jeep Comanche - Fixya

www.fixya.com/cars/t26003692-adjust_headlights_86_jeep_comanche
9 mins ago - Do you mean Aftermarket or Factory Harness ... it sounds more like a faulty headlight switch assembly ... Buy a new one at a parts store, install it.

Headlamp Adjusting Screw - Sold Individually - 55054621

www.morris4x4center.com/headlamp-adjusting-screw-55054621.html

Rating: 5 - ‎5 votes
1984-2001 Jeep XJ Cherokee; 1986-1992 Jeep MJ Comanche. Description: This is aHeadlamp Adjusting Screw. This allows you to aim your headlights ...

Headlight adjustment - Jeep Cherokee Forum xjTalk - A Jeep podcast!

xjtalkshow.com/showthread.php?t=13045
Jan 7, 2013 - Headlight adjustment OEM/Factory. ... the JEEP TALK SHOW! It's aJEEP podcast! iTunes, Stitcher, TuneIn or... http://jeeptalkshow.com ...

Adjusting headlights - JeepsUnlimited


Dec 12, 2015 | Jeep Cars & Trucks

1 Answer

1999 jeep Cherokee sport stuck in 4h wont go back to 2h


is this the Part time 4wd, system> option>?
Aw4 or NV231 CT or NV242 ST case?
Got Select trac? we cant guess that, and you must know it.
got PT part time? Command track 231
if yes, you must never drive in 4wd command trac on dry pavement.
only ice and dirt.
now that you got the poor joker wound up ,drive to dirt and shift out of 4wd. gingerly.

AWD has a center Differentia,l if you lack this part, then you need
to learn to use PT 4wD
here is a guy that learned the hard way

http://www.rubicon-trail.com/4WD101/driveline-bind.html

here is the confusion
see this page,
see all the different 4wd?
http://en.wikipedia.org/wiki/Jeep_four-wheel-drive_systems


got this? if not, stop using 4wd on dry pavement



579cd5b9-fd25-4259-b16c-008c3c0322bb.jpg

Sep 24, 2014 | 1999 Jeep Grand Cherokee

1 Answer

1996 jeep cherokee is hard to start


The best place i have found to get parts at low cost is a salvage yard. I did the same thing on my 88 Comanche and the only place i found the parts where at a salvage or junkyard.

Jul 05, 2012 | 1996 Jeep Grand Cherokee

1 Answer

Can i use a transmition from 1998 grand cherokee laredo 4wd to a jeep laredo 1998 4.0 4wd. will work same trnsmition?


Hi Jose, I've never tried but if you go visit a breakers yard and compare the physical dimensions of both boxes and they match up, there is no reason why they should not. Most manufactures use the same units in a variety of models and if you've found a similar vehicle with identical uses the parts are most likely interchangeable. Regards John

Apr 01, 2012 | 1998 Jeep Grand Cherokee

1 Answer

How to put a 95 or 96 jeep cherokee sport in 4 wheel drive. handle is left of the gear shift.


You can change on the run but as a general rule stop to change to 4wd.except 2wd to 4wd high.Just slow down to about 15mph and back off the gas.
2wd high is normal running
4wd high(is full time 4wd)this is slippery roads or muddy roads.
4wd high lock For bad and slower slippery and rocky roads.
4wd low lock is for extreme 4wd conditions
Don't use the last 2 on the main roads or transfercase will be damaged
Hope this helps

Dec 03, 2010 | 1995 Jeep Cherokee

1 Answer

Hi I have a 96 jeep cherokee country with a transfer case problem. my transfer case has 2wd, 4wd full time,4wd part time, and 4wd low. the tag on the transfer case says 242 does this seem right or has...


the 242 is the correct transfer case for your car.Its the selec-trac transfer box.The other type is the command-trac.Both types were used in Cherokees.Hope this helps

Jan 03, 2010 | 1996 Jeep Cherokee Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...