Question about 1998 Toyota Camry

1 Answer

I removed my spark plug wires and forgot which wire goes with which plug for a 1998 toyota camry.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 437 Answers

I removed my spark plug wires and forgot which - moz-screenshot.pngmoz-screenI removed my spark plug wires and forgot which - moz-screenshot-2.png_mimoz-screenshot-2.pngThe firing order is 1-3-4-2

Number one is the one at the pulley end of the motor and number 4 is at the flywheel end of the motor.

System uses a Distributorless Ignition System (DIS) with 2 ignition coils. Cylinders No. 1 and 4 use the same ignition coil. Cylinders No. 2 and 3 use the same ignition coil.

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok if I get a scanner reading on a 1998 Toyota Camry LE 2.2 liter did the number 1 and number for spark plug wires are failing what would be the problem is it the wires or oil or something else


possibly what is called a misfire, could be plug, bad wire, fuel injector, or oil or water getting to plug. majority of time it is bad wires and/or plug

Apr 01, 2015 | 1998 Toyota Camry

2 Answers

Toyota camry 4cyl model 1996 oil leaking in 1 spark plug only what is the solution...


well there are two options., your valve cover grbomets for spark plug tubes are bad,specificly #1 or spark plug tube has to be remove and reseal, while doing this if not have acces to an special removal tool you need to remove valve cover, take this has an oportunity to replace valve cover gasket and all gromets(spark plug tube 4, and vlebe 8 small that look like a washers on each bolt) the tubes are treat in remove with locking plyers clean treaths on a wire wheel apply black silicone and reinstall.

Jan 10, 2013 | 1998 Toyota Camry

2 Answers

I have a 1998 toyota camry with p1133 and p0 300 and it misfire bad on exceleration


could be bad spark plugs or wires that would be an easy start for you...would start with good tune up...Hope that helps you,,

May 22, 2011 | 1998 Toyota Camry

2 Answers

My Toyota Camry 96 isn't starting. New battery the alternator and starter are working properly and there are new spark plugs . The engine is turning over and it's getting fuel but it just doesn't start....


Faulty MAP or MAF sensor, EGR valve stuck open, spark plug wires don't match firing order, large vacuum leak to intake manifold, very dirty fuel injectors, idle air control valve defective, poor compression in cylinders due to incorrect valve timing or leaking fuel injector o-ring seals.

Feb 10, 2011 | 1998 Toyota Camry

1 Answer

1998 Toyota Camry XLE 3.O liter - sometime misfires, according to Advance it the # 4 cylinder.


Run your vehicle with the hood open at night in a dark place with the headlights off. Look at the spark plug wires to see if spark is jumping out onto your chassis. If you have the long tubular boots, remove the one going to #4 cylinder and see if spark jumps to chassis through the side wall of boot. If so, replace the wire. It also could be the #4 post on your distributor. It's part of the cap assembly and they are usually pretty cheap to replace. Replace rotor button when replacing cap. The rotor button is usually less than 5 bucks.

Nov 23, 2010 | 1998 Toyota Camry

1 Answer

98 toyota camry spark plug wire keeps poping out of manifold and makes engine run sluggish ( runs good when you push it back in ) is there any way to keep wire from poping out ? ( Im unable to push spark...


Remove the wire from the plug and look inside the Boot, there should be some metal prongs that clamp onto the plug, check to see if they are set right, so that when you install the boot on the Spark Plug they will clamp and stay on the plug. If you're not sure what it should look like, pull off the boot on the plug next to the one you are working on and compare the two. You can use a long flat bladed screwdriver to bend the prongs, make sure you're Engine and Ignition are off when you do this.

Sep 08, 2010 | 1998 Toyota Camry

2 Answers

How do u change the spark plugs on a 1994 toyota camry


Start with a cool/cold engine.

Four cylinder: Remove spark plug wire boots (four in a row on top of the engine). DO NOT PULL ON THE WIRE only the rubber top. Make sure the wires are numbered, if not, number them. They MUST go back to the same hole they came out of after the new plugs are installed. Remove the spark plugs with a 16mm spark plug wrench. Install new plugs (any auto parts store can tell you what your options are here): Start threading the new plugs by hand so you don't cross thread the engine head by accident. Then complete tightening them gently. Spark plugs are supposed to be tightened to a specific torque: 13ftlbs in this case. If you choose to not use a torque wrench do not overtighten the plugs. Reinstall boots securely.

6-Cylinder: Remove engine cover, if present. Disconnect the six connectors on each of the ignition coils. Remove each of the six ignition coil bolts and then remove the coils by pulling straight up -- arrange them so that you know which goes back where. Remove and install the six plugs as described above. Reinstall the ignition coils with their bolts (torque: 69 in-lbs), then wires. Replace the cover.

Jun 11, 2010 | 1994 Toyota Camry

1 Answer

Cant get the spark plug wires off 99 toyota camry 2.2 L. can take it off the plug but not the other end


There's a special tool designed for removing the plug-wires. You could get one for less than $10 at a good autoparts store. You could also try this option:

Drive the car a couple miles to let the engine warms up. Then put a piece of rag on top of the plug wire concerned, so it won't damage the end of it (and for a good grip).
Grap the top of the plug-wire firmly. Then turn/twist sideways, and lift out the plug-wire. Repeat this until you get it done.

If you couldn't remove the plug-wires without damaging them, you may have no choice but to tear them off with the plier, and buy yourself new plug-wires. Ask the autoparts clerk to show you some special adhesive to apply to the new plug-wires, so they won't get stuck again.

Dec 17, 2009 | 1998 Toyota Camry

1 Answer

Changing spark plug wires in 1998 camry


You aer not clear about your problem, when replacing plugs and wires all the boots need to stay in place, the larger boot goes around the spark plug, making sure the metal is secure around the tip of the plug, the oppisite end fits the distributer cap, making sure the metal at the end of the wire is securely in the hole. You said you have 3 boots, you should boots for each end of each plug wire and a plug wire for each spark plug

Jan 18, 2009 | 1998 Toyota Camry

Not finding what you are looking for?
1998 Toyota Camry Logo

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...