Question about 2002 Ford Excursion

1 Answer

MY 4x4 on my excursion is stuck and does not want to come off how do i get it to come of and back to 2w drive?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

Without the ability to diagnose the problem further, obvious things need to be eliminated. First step, with engine running and foot on brake, shift transmission to neutral. Then slowly turn Four Wheel Drive (4WD) selector knob out of 4WD Low to 4WD High, and then finally to 2 Wheel Drive. "4x4" and "LOW RANGE" indicator lights on the instrument panel should no longer be illuminated. If this does not work, you should visit FixYa for further help or take it to the shop for proper diagnosis. Hopefully, this will help you to FixYa problem!

Posted on Oct 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 Sierra 1500 4x4 and as I was driving it started to slip from 2w to N, so I'd stop and put it back but then do the same thing, then I jus started to hear grinding . I don't know w


I don't really know either, but , I have a 4x4 myself, gmc 2500, maybe together we can see what it is. my gmc has a shift lever on the floor to change 2w, 4w, hi, lo range, n. I'm assuming so so you., is there a switch @ transfer case, that is @ fault ? hope that grinding stopped that you mentioned. seems to me the transfer case is where we should look at first. I'll get back to you

Jan 15, 2013 | Cars & Trucks

2 Answers

2003 Montero Limited, will not go into 2w high . What is the most Common fault?


Yes larry is very correct.Try going in reverse.

On these issue,there are few solved help links for troubleshooting the issue easily.-------

Click the link below:---
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------
4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------
4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------
4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------
Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------
Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Nov 26, 2012 | Cars & Trucks

1 Answer

Light blinks and ding or beeps while driving how can i get it off i drive a 2001 excursion with the 7.3L 4x4


Temporary fix ,,, elec window ...roll it down slightly...
Permanant fix is remove door panel , lock tite , and tighten nut on stud,,,,12 mm nut near door latch.
30 miniuts for qualified teck.

Jan 31, 2011 | 2001 Ford Excursion

1 Answer

I put my 2001 excursion into 4x4 high for just a minute one afternoon. That night I was going out of town on a wet road and heard a roaring sound. At first we thought it was a flat tire. Once we checked...


When you take the vehicle out of 4X4, you should always back up for around 50 feet to fully disengage the 4 wheel drive..........Hope this helps and also the electronics on the transfer case may be corroded or bad.

Dec 20, 2010 | 2001 Ford Excursion

1 Answer

Need a lay oougt of fuse box for 2003 excursion


4wd shift motor, It is mounted to the transfer case. If it has not been used for a while the windings in the motor usually get stuck. Take a hammer and tap on the shift motor and then try to put you vehicle in 4wd. The shift motor kind of looks like a window motor just a little bigger. Sometimes you have to have someone move the selector as you tap on the motor, BUT BE VERY CAREFUL< DON"T GET YOURSELF RAN OVER> Let me know if this fixes your 4wd. Once you get it going it is always good to put your vehicle in 4wd a few times a year just to keep this 4wd motor going. Good Luck, Roger

Feb 13, 2010 | 2003 Ford Excursion

2 Answers

Ford excursion 4x4 locks and wont unlcock


my4x4 is stuck and can't change back to 2w drive

Feb 09, 2010 | 2001 Ford Excursion

1 Answer

4x4 malfunctioning


some times the truck has to be put in the opisite direction the for wheel drive was driven in last. so if ya were going forward and you have auto locking hubs then you need to drive irt backwards till lights go out. and if you have driven a long way with it like that then you might have to back up far but it should unlock those hubs. if not then on transfer case there is a small motor that engages and you will need to remove that motor and manually move selector to 2h.

Feb 05, 2009 | 2000 Ford Excursion

Not finding what you are looking for?
2002 Ford Excursion Logo

582 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...