Question about 2007 Hyundai Santa Fe Limited

Open Question

How do I replace fog light on 2005 Santa fe - 2007 Hyundai Santa Fe Limited

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 566 Answers

SOURCE: 2007 Hyundai Santa Fe - Replacing fog light

hi have not had pleasure of this on santa fe yet? but will try to help dependant of which side o/s or n/s ? i would first remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to remove? or if rubber cover pull off? then the bulb and clip should be visible? unplug the wire from bulb then the spring clip holding bulb in place normally just sring the 2x top ends together and swing down/clear to remove bulb? refit new bulb correctly! pay attention to position old bulb positioned? then clip securely and re connect wire at this stage it would be best to ensure bulb works ?? before you re assemble all else? wish you luck and hope this helps with your problem ?

Posted on Oct 28, 2008

Ad
  • 1 Answer

SOURCE: Fog Light Replacement Hyundai Santa Fe

The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.

Posted on Apr 06, 2009

  • 32 Answers

SOURCE: HOW I CAN REPLEASE 2004 SANTA FE FOG LIGHT BULB

there is a lock tab that needs to be depressed and turn counterclockwise at the same time.

Posted on May 06, 2009

  • 1986 Answers

SOURCE: How do I replace fog lights on my 2002 Hyundai Santa Fe?

Look up into the bumper and see if you can access the fog light. The bulb should just twist out of the back. If not, the assembly should either pop forward or back to come out. I've heard though, that many santa fe's require the removal of the entire front bumper fascia just to get to the bulbs in which case you'd have to remove your headlights to get to the screws holding the bumper fascia on

Posted on Sep 09, 2009

extreme7528
  • 108 Answers

SOURCE: how to change the 2001 hyundai santa fe fog lights

you will need to completely remove the front facia (bumper to get access to the fog lamp assemblies as they are bolted in from behind. No big deal. There are a few screws along the top of the facia under the hood along with some plastic push pins ( you may want some extra ones on hand before starting this) There is a screw where the facia meets the front quarter panels in the wheel wells and there are about 8 push pins along the bottom of the facia that need to come out. Then lift out. No sweat right! For real though it isnt. Just a side note, while you have the facia off you now have easy access to the windshield washer pump motor. This is a perfect time to remove the pump, clean the screens and flush your resivor tank out. Getting clogged pumps seem to be common place on hyundai's vehicles. Please let me know if this helps.

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should I look for when my 04 Hyundai Santa Fe, when of the fog light does not work. Even when you put a new bulb in it.


IS THE SOCKET GOOD (ANY CRUD BUILD UP IN THE SOCKET) CHECK THE WIRES TO THE SOCKET FOR GOOD CONNECTIONS.

Oct 17, 2014 | 2004 Hyundai Santa Fe

1 Answer

Hyundai santa fe 2001 has no fog lights


I doubt if it is a serviceable part . I would just go to a wrecker that specialises in Hyundai and look for a car that was rear ended and get the part you want

Feb 02, 2014 | 2001 Hyundai Santa Fe

1 Answer

How to replace fog bulb on santa fe 2013


"Replacing fog light bulbs on 2013 Santa Fe". Raise vehicle if you are a big person. In front of front wheels triangular plastic panels exists. Remove Phillips head plastic screws in chosen panel (2ea). Pull panel down. Stick hand through opening, remove wiring connector from bulb. (Bulb will not come out unless you do). Twist bulb housing counterclockwise and remove. Install new bulb, reverse procedure and don't touch the glass part of the bulb.

Nov 20, 2012 | Hyundai Cars & Trucks

1 Answer

Fog lamp replacement


there is an access panel located in the wheel well,behind the fog light. it has plastic screw heads ,they don't turn out so just pry them out and u can reuse them . the fog light is now accessible

Nov 22, 2010 | 2007 Hyundai Santa Fe Limited

1 Answer

The fog lights on my santa fe want turn on when the switch is depress


hi from uk if your front and rear fogs are of the same specification as uk models of hyundai ? these front and rear fogs although the switches are on these lamps will not operate till you turn headlight on dip beam reason being that if weather conditions req fogs on then you should have rear and front side light and head lights on however if you inadvertently forget to switch front or rear fogs off when you turn other lights off when parking car ? you will/should hear the warning bleep as you open drivers door as you would if side/rear lights are still switched on ? hope this helps?

Mar 03, 2010 | 2003 Hyundai Santa Fe

1 Answer

I need the number of the light bulb that is in the fog lamp switch on the dash.


Bad news. There are no part numbers for those little internal bulbs inside the fog light switch or even the rear defroster switch. Mine have blown out on my 04 Santa Fe. I've been through several dealers here in Denver and all tell me that Hyundai does not offer those bulbs individually. You must buy the whole switch. I know that sucks. I'm now checking with salvage yards to pull switches out of salvaged Santa Fe's. Hope this helps!

Nov 17, 2009 | 2002 Hyundai Santa Fe

1 Answer

What is the best way to replace a fog lamp bulb on a 2008 Santa Fe?


1. Turn tires away from car
2. There is a plastic covering in front of the wheel that usually goes around the wheel well. There are plastic thumb pins on the outer edges of this plastic covering. Remove the thumb pins and this plastic piece will come off.
3. Behind this you will find access to your fog lights.
4. Then you can remove the fog light by twisting the plastic cover (if it has one) or by twisting the bulb

Nov 10, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

How do I replace fog lights on my 2002 Hyundai Santa Fe?


Look up into the bumper and see if you can access the fog light. The bulb should just twist out of the back. If not, the assembly should either pop forward or back to come out. I've heard though, that many santa fe's require the removal of the entire front bumper fascia just to get to the bulbs in which case you'd have to remove your headlights to get to the screws holding the bumper fascia on

Sep 09, 2009 | 2002 Hyundai Santa Fe

1 Answer

How do you change fog light on 2005 santa fe


remove the headlight assembly 10 mm bolts hold it in and the fog assembly will be accessed from there

Sep 02, 2009 | 2005 Hyundai Santa Fe

1 Answer

2007 Hyundai Santa Fe - Replacing fog light


hi have not had pleasure of this on santa fe yet? but will try to help dependant of which side o/s or n/s ? i would first remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to remove? or if rubber cover pull off? then the bulb and clip should be visible? unplug the wire from bulb then the spring clip holding bulb in place normally just sring the 2x top ends together and swing down/clear to remove bulb? refit new bulb correctly! pay attention to position old bulb positioned? then clip securely and re connect wire at this stage it would be best to ensure bulb works ?? before you re assemble all else? wish you luck and hope this helps with your problem ?

Oct 28, 2008 | 2007 Hyundai Santa Fe Limited

Not finding what you are looking for?
2007 Hyundai Santa Fe Limited Logo

Related Topics:

696 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...