Question about 1993 Ford Taurus

1 Answer

How do you remove interior door handle form 1993 Ford Tercer The window won't roll up and I can't get the handle off to get the panel off to get to the window tract

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

It's easy!


  1. Remove triangle-shaped plastic cover Fwd of door window - gently pry it off

  2. Remove screw from the plastic cover behind door open lever

  3. Remove door lock plunger. (unscrew)

  4. Remove screws down inside the door pull hand-hold area

  5. Look for other phillips screws - sometimes around the lower 1/2

  6. Pry hidden plastic hold down fasteners from around the edge - pull the panel away from the door and where you see it 'stuck' to the door, slide a pry tool, a stiff putty knife works well, up in that area and pop the fastener off.

  7. Lift door liner enough to get to the mirror power connector and unplug.

  8. For some model years, with door panel loose, you can access the bolts / screws that hold the interior trim piece in place and remove.

  9. Remove Mylar cover for access to 3 Mirror mount studs, speaker screws, door lock actuators, window motors, etc.

  10. Remove nuts, (hold the mirror up from outside) and remove mirror. (Feed electrical harness through door openings as required to facilitate removal.

  11. Reverse order for installation.

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove inside rear door panel on fiesta 2015


Ford Fiesta Plastic Interior Door Panel Removal Guide ...

www.paulstravelpictures.com/Ford-Fiesta-Interior-Door-Panel-Removal-...
Ford Fiesta Interior Door Panel Removal Guide How to take off the plastic interior door panels in a 6th generation 2009-2015 Ford Fiesta to upgrade the ...

Ford Fiesta inner door panel removal (I removed the top one ...

www.fiestafaction.com/.../44959-Ford-Fiesta-inner-door-panel-removal-...

Jan 19, 2015 - 10 posts - ‎3 authors
This is an excerpt from the manual: Remove the rear door window glass. ... Route theinterior door handle cable and door lock actuator electrical connector through the ...Last edited by WildmaninME; 01-19-2015 at 07:41 PM.

Ford - door panel removal - fiesta - YouTube

? 2:19
https://www.youtube.com/watch?v=1URT13Yusjg
Oct 19, 2013 - Uploaded by one2three
this is the removal of a door panel from a ford fiesta 2001. ...Replacing Broken Inside Door Handle on 2007 Ford Fusion - Duration: 5:32. ... Ford Fiesta 1.25 2004 - Cleaning and adjustingrear brake drums - Duration: 8:47.

How To: 2012+ Ford Focus Rear Door panel removal(SE,ST ...




Jan 13, 2016 | Cars & Trucks

1 Answer

How to remove interior door panel 2011 explorer


There is a particular tool for this you can get at any auto parts store. It's called a panel removal tool. There are special buttons that are set into the panel that pop into holes in the door skin and you find each one by sticking the flay tool between the door panel and skin of door and pry the button out of the hole in door skin. This tool also has one end that removes the door window crank and opening lever by placing it between the plastic and the handle and just push it and roll it around till the retainer clip comes off and remove the handles. Find any screws that may be also attaching the panel and remove them.

Oct 15, 2014 | 2011 Ford Explorer

1 Answer

The driver side window in my 1988 ford ranger will not roll down. Its manual. What's the problem and how should I fix it???


Remove the clips in the inside of the window handle,also clips on door handle.Look for any screws holding the door panel on, then take a screwdriver and pry the door panel away from the door. re install the window handle,and try rolling the window down. You will probably see what is stopping it. If it looks like the window regulator is worn out, check the local junk yards for a replacement.

Jul 16, 2011 | 1988 Ford Ranger

1 Answer

2007 Hyundai Accent the driver side door won't open from the inside. It opens from the outside so I have to roll down the window and open the door before i shut the engine off.


Either the interior door handle or the cable inside the door is broken. You'll need to remove the door panel and look to see what is damaged.

May 25, 2011 | Hyundai Accent Cars & Trucks

1 Answer

Outside handle on 1997 Toyota Avalon will not open door


Since you can get the door open, half the battle is already won. Yes, open the door, pull the interior door panel and take a look around. Watch inside with a flashlight (towards the rear of the door) as you roll the window down to see if you can see what it's snagged on.

Jun 03, 2010 | 1997 Toyota Avalon

1 Answer

The left rear passenger door exterior door handle will not open the door. The interior door handle does work. how do I repair it?


You will need to remove the interior door panel and inspect the linkages. The offending rod should be obvious and loose.

Jan 17, 2010 | 1993 Ford Explorer Limited

3 Answers

1997 buick park ave 4 door right front door handle won,t work from the outside


Order the exterior door handle AND the clip that attaches the rod to the exterior handle from your local dealership ( any part in the salvage yard will have at least as much wear as the one U are replacing ) Also order a can of touch up paint matching your car. After you have the parts and have painted the new exterior handle, roll down the window and remove the interior door panel. ( instructions have been posted at 'replace door lock buttom' ) Two nuts, one on each side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will need to reattach the rod to new handle ) To install new mechanism put the new clip on the rod, carefully place the gasket and the new handle in place and install nuts to secure. Test the door handle and make sure it works. Reinstall interior door panel.

Jul 06, 2009 | 1997 Buick Park Avenue

1 Answer

Driver's side interior door handle snapped off


there is plastic snaps that attatch the panel to the door all the way around the panel which you can buy a tool to remove the panel without breaking the snaps,the door handle may have a cable hooked to it that releases the latch and it might be stretched causing the handle to pull hard

Apr 24, 2009 | 1989 Ford F 150

1 Answer

Trying to remove driver side interior door panel on '88 Toyota PU


There is a cotter pin in the window crank, a pair of needle nosed pliers should be able to grab it

Dec 02, 2008 | 1988 Toyota Pickup

2 Answers

How do you repair a gmc sierra 1998 inside door handle


You have to remove the door panel, if you have roll down windows the handle will have to be removed. After panel is removed you have to drill the one rivet that hols the interior handle. slide the handle down and unfasten the rod retaining clip. Please make sure you do not break the clip. Install the new interior door handle, clip and provided fasteners. Try the door before you install the interior door panel, Note the is a good time to lube the window roller and the door mechanism. Make sure to install the water shield to provide the protecting from the elements. Line all the plastic retaining clips and or replace if they are broken. Good Luck.

Jul 22, 2008 | GMC Sierra Cars & Trucks

Not finding what you are looking for?
1993 Ford Taurus Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...