Question about 2002 Buick LeSabre
Posted on Jun 01, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Some are in the inlet to the evaporator and some could be in the condenser line. You can get a new orifice tube on autozone for $5 - 20
Posted on Jul 14, 2008
Iam an ASE Certified mechanic and i had the same problem with my 99
century and i wasnt able to drive at night. After hours of testing
wires we came to the problem. Its the turn signal switch assembly which
is tied into the hazard switch on top of the steering column. Its all
one piece with a 3 foot long wiring harness attached to it running down
the bottom of the steering column and going underneath the dash. The
least expensive place i found the part and had it in stock was my local
Auto Zone and still the part was $200.00.
P.S. This is a common problem on these GM cars. Mine did the same thing to the tee! The lights will go on and off then they just went off for good and this solved the problem. I guarantee it. If you have any questions please email me i will do all i can to help.
Posted on Jan 30, 2009
P0446 Evaporative Emission Control System Vent Control Circuit Malfunction
The evaporative emission control system checks to make sure there are no leaks in the lines that run from the gas tank to the charcoal canister and up to the engine. It also checks to make sure the gas cap is sealing correctly.
It may just be that the cap was not on tight and the code was tripped.
A dusty environment can also clog the vent line and cause this code.
Have the code cleared and see if it comes back. Some auto parts stores like Auto Zone can read and clear the codes for you.
Hope this helps.
Posted on Sep 02, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Nov 10, 2015 | 2002 Buick Century
Jun 19, 2014 | 2002 Buick Century
Jan 23, 2013 | Cars & Trucks
Sep 05, 2011 | 2002 Buick Century
Dec 17, 2010 | 2002 Buick Century
Nov 04, 2010 | 2002 Buick LeSabre
May 10, 2010 | 2002 Buick Century
Dec 27, 2009 | 2002 Buick Regal
Jun 19, 2009 | 1988 Buick Century
1,770 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: