Question about 2004 Chevrolet Venture Passanger

1 Answer

Replace left hub assembly on 2004 Chevrolet

Replaced left hub assembly on 2004 Chevrolet venture van. Test drove it, everything worked fine (besides sitting for a few months). Parked it, engaged the emergency brake. The next morning battery was dead. Replaced the battery and now it will not shift into gear. The shifter on the column just moves freely. Any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Check linkage on top of transmission and make sure it moves while engaging shift lever. You may have also left a light on while doing work on van, check all interior lights that may still be on.

Posted on Jul 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix a glove box latch on a 2004 Chevy Venture van?


go to a wreckers that handles you make and model and get the whole assembly

Nov 11, 2015 | 2004 Chevrolet Venture Passanger

1 Answer

Extreme vibration in front end of vehicle, 2004 chevy express 3500 cargo van, gear box has been replaced twice, pitman and idler arms replaced already and left hub assembly replaced already, ruined a set...


Check stabilizer bar and bushings as well as the stabilizer links. Has alignment been checked after front end work you did? (Caster, Camber, Towin, Towout ?)

Nov 29, 2010 | Chevrolet Express Cars & Trucks

1 Answer

Fuel gauge on 2004 Chevy Venture Van jumps all over not showing correct fuel amounts


I have a 2004 venture ext. van and the fuel gauge doesn't work. Any suggestions?

Oct 03, 2010 | 2004 Chevrolet Venture

1 Answer

Help! My parked venture van alarm goes off whenever a motorcycle,heavy trucks or any noisy car passes by beside it. How can it be fixed?


had our van for 8 years, it did the same thing when a loud vibration triggered the sense alarm. Pretty bad when it went off while in church. Never happened while parked in garage at house though. Could be sensor is worn out and needs replaced.

May 29, 2010 | 2002 Chevrolet Venture Passanger

3 Answers

Left blicker blicks fast. Light works in rear but


check if front bulb is ok may be burnt must replace or have wiring checked
and check fuses again may not be making good contact

Aug 08, 2009 | 2004 Chevrolet Venture Passanger

1 Answer

Replaced battery securty light came on power no start


Here is something that the emission wiz helped me with


PASS LOCK RESET GM CARS 1999 UP
1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your key
.

Mar 14, 2009 | 1997 Chevrolet Venture

1 Answer

Red dash light


wavy lines usullay means ckeck coolant level.

Dec 13, 2008 | 2001 Chevrolet Venture

3 Answers

Buick rendevousz headaches


I own the 2002 Buick Rendezvous CX and I've encountered the same problems listed here. The ABS / Traction Control Lamp stays on and was throwing a code for the left wheel speed sensor as well as an anti-lock brake code (both in the wheel bearing hub assembly). I replaced the left and right front wheel hub assembly yet this did not eliminate the abs codes. 
Ultimately, I traced this problem to a break in the wire that leads to the left hub assembly. Although the sensor was properly connected, the wire (which is encased in a plastic housing) was broken. This is the wiring which leads from the abs wiring harness under the hood down to the left wheel abs sensor. 
I would suggest that you simply remove the left wheel and inspect the wire that leads to the abs sensor (there is only one wire on each wheel). Mine literally fell apart when I removed the plastic housing around the wire. I spliced the wire together and put it back in the plastic housing. After this, my abs codes disappeared and my anti-lock brakes began working again!
This is a simple fix that many people spend $1000 + on by replacing the hub assembly which does not fix the problem.

Aug 20, 2008 | 2002 Buick Rendezvous

Not finding what you are looking for?
2004 Chevrolet Venture Passanger Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...