Question about 2004 Nissan Maxima
There is a CD stuck in the factory installed player of the used 2004 Maxima I bought from a dealer. It's a home-made CD. Any idea how to manually eject it without damaging the player? Thanks.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 nissan maxima
Take a look at your gausett brackets, by the front exhaust tube. 2 sheet metal lookig brackets, each held up by 2 screws each. Those gausetts brake and cause a rattle, Common problem on a MAxima your year. Nissan has a TSB for replacement of these brackets.
Posted on Jul 26, 2008
I searched quick and couldn't really find anything on a manual eject button. Flip through the manual a little bit and see what it has about the radio. If all else fails and you aren't worried about possibly breaking the stock cd player, some skinny needle nose pliers should reach in far enough to grip the cd and you can pull it out. But there is a good chance you could break the cd player in doing so.
Posted on May 04, 2009
you window must have slipped off the rolling pulley that pushes the window up or one of the plastic pieces is broken that holds the window.
Posted on Nov 02, 2008
jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......
Posted on Apr 18, 2009
Hi, this is a common issue within car CD changers. the load motor go through lots of trauma during the life span that i usually 3 to 5 years. the load motor operates everything in the changer. it works the load tray and spinning of the disc as well. when this motor is out, the changer will be rendered useless. replacing the load motor will fix this issue or, you can just purchase a new changer and save a lot of money.
Posted on May 21, 2009
Tips for a great answer:
Feb 03, 2016 | Nissan Cars & Trucks
Dec 25, 2015 | Nissan Cars & Trucks
Sep 18, 2012 | 2004 Pontiac Grand Prix
Aug 05, 2011 | 2004 Chevrolet Monte Carlo
Jan 05, 2010 | 2004 Ford Thunderbird
Jan 02, 2010 | 2004 Pontiac Sunfire
May 04, 2009 | 2004 Chevrolet Silverado 2500HD
Feb 15, 2009 | 2002 Chrysler PT Cruiser
Nov 21, 2008 | 2002 Ford Mustang
462 people viewed this question
Usually answered in minutes!