Question about 1999 Jeep Grand Cherokee

2 Answers

How to adjust de belt to grand cherokee 8 cilinders 4.7

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers

  1. Step 1 Find the belt tensioner pulley. The tensioner pulley is generally between the crankshaft and a component toward the top of the hood area.
  2. Step 2 Check the belt routing so you know how to replace the belt. You may be able to find a belt routing diagram on a decal on the fan shroud or in support documentation. Otherwise, make you own sketch for reference.
  3. Step 3 Rotate the belt tensioner pulley, using the wrench, to and relieve tension on the belt.
  4. Step 4 Slip off the old belt and slowly release the tensioner pulley.
  5. Step 5 Use your belt routing diagram to put the new belt onto all of the pulleys. Pay close attention to the water pump pulley, as incorrect routing can cause the water pump to run backwards and overheat.
  6. Step 6 Make sure the belt is correctly routed and seated on all pulleys. Rotate the tensioner again to allow for the belt to slip onto all pulleys and then release the tensioner again to regain correct tension on the belt.

Posted on Jun 01, 2010

Testimonial: "Hey thank you, I apreciated your faster answer to my question!"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Inspect it for cracks. the belt is nonadjustable. Its on a tensioner. If its old replace it the belt. Test the tensioner by working it. If it does not move freely replace the tensioner.

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Replace serpantine belt on 96 jeep grand cherokee v-8


Here you go, pick the one that applies:

https://www.google.ca/search?q=serpentine+belt+routing+for+96+jeep+grand+cherokee+v-8&biw=1360&bih=609&source=lnms&tbm=isch&sa=X&ei=9B71VMygJ5PfgwS-rYCgDA&ved=0CAYQ_AUoAQ

Mar 03, 2015 | 1996 Jeep Grand Cherokee

1 Answer

Belts already off need to get slack for new one


The 6 cyl engine uses an adjustable pulley to keep the belt tight.
The 8 cyl engine uses a tensioner that is spring loaded.
You have to loosen the mounting bolts and turn the adjusting bolt to move it on the 6 cyl.
You use a bar or wrench to move the tensioner.

Feb 20, 2013 | 1997 Jeep Grand Cherokee

1 Answer

Firing order diagram for 1989 chevrolet p 20


It's a V8? 1-8-4-3-6-5-7-2 for a Chevrolet.
Starting from de front cilinder, right bank, N?1, from fron to rear, 1,2,3,4.

Left bank from front to rear; 5, 6, 7, 8.

Distribuitor rotates clockwise.

Jan 02, 2013 | Cars & Trucks

1 Answer

What is firing order


Depend what Engine Model you have:
2001 - 2004 (WG) Grand Cherokee (International Markets)
1999 - 2004 (WJ) Grand Cherokee (All Markets)
WJ engine Specifications
4.0L I-6 1-5-3-6-2-4
4.7L V8 1-8-4-3-6-5-7-2
4.7L V8 HO 1-8-4-3-6-5-7-2

Sep 08, 2010 | 2001 Jeep Grand Cherokee

1 Answer

How to install idler pulley and serpentine belt


sir andre her ihav ea problem whit a chey transsport from 1997
i had trection cotrol on en de egine go of after that i try to put it on agian an than i here like the egine whas running on five cilinder can you tel me please what that problem is

Jan 25, 2010 | 2005 Jeep Grand Cherokee

1 Answer

What is the firing order of a 2005 jeep grand cherokee


I wrote all engine spec for a 2005 jeep grand cherokee

3.7L 6 cylinder
1-6-5-4-3-2

4.7L 8 Cylinder
1-8-4-3-6-5-7-2

5.7L 8 Cylinder
1-8-4-3-6-5-7-2

let me know if this help you.....

Sep 30, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Distributor cap wiring diagram


Check this info... Wiring Diagrams with the graphic firing order for 6 and 8 cilinders.

Good luck!!!

Apr 22, 2009 | 1993 Jeep Grand Cherokee

1 Answer

1995 Jeep Grand Cherokee - Removing serpentine belt


Faceing the Engine The Tentioner is on the LEFT side next Pulley Down from the Alternator , Use A Box end 6 point Wrench to Turn Tentioner To the Right (CLOCKWISE) to Loosen the Belt, Take A Good Look at it If there is No Belt Diagram to Remember the Way It is Routed if thats all you need then you R on your way. Good luck !

Feb 05, 2009 | 1995 Jeep Grand Cherokee

2 Answers

2004 jeep grand cherokee limited makes a noise


Sounds like a loose belt, Depending on what engine etc., it may need to be changed or if you have adjustment, tightened. When adjustment or replacement done, is a good time to check all pulleys. If your not up to it, an adjustment should not cost too much, few minutes work in most cases, if belt needs changing, price of belt & a little more labor involved.

Dec 24, 2008 | 1998 Jeep Grand Cherokee

2 Answers

1999 Jeep Grand Cherokee Problem


Idle prolem could be a dirty throttle body or sticky air idle control motor.
If the Jeep is a 6 cly. the adjustment for the belt is the power steering pump.
If the Jeep is an 8 cyl. the tensioner is on the pass. side of car.

Oct 17, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...