Question about 2000 Mazda MX-5 Miata

2 Answers

How do you remove the speedo head to change the gauge faces

Posted by on

  • vkumse Jun 01, 2010

    How do I remove the dash of a 2000 miata

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

If noone has the info I would go to mitchell1diy online and for ten bucks pay for all the procedures. It may have what your looking for.
Please do not rate me unless its good since I really don't have a perfect answer for you.

Posted on Jun 01, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 17,970 Answers

There isn't one MX5 but its possible that this LINK1 or LINK2 can help like reference guide.

If you thnik that need to repair your 1990 - 2000 Mazda Miata MX5, visit HERE.

Hope helps.

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove dash to access the gauges for cleaning faces


You just have to figure out how to remove everything necessary from the front of the dash, so you can actually get at the gauges.

It's just the trim piece first, plastic clips or screws. Now remember,if you were trying to remove the dash cluster, it would come out just the same way. You just need to get to it, not remove it. t should be pretty easy to figure out. Phillips head and/or 1/4 inch head sockets for screws and small bolts. Some are 5/16ths.

Oct 07, 2014 | 1998 Mercury Grand Marquis

1 Answer

Code P0500 Speedometer doesn't work on my Toyota Tundra


Hi Coritter, Depending on the year of manufacture of your vehicle, the speed control could be related to the ABS pickup sensors mounted on the wheels. Modern vehicles manufactures tend to double up on functions and therefore a fault seemingly unrelated can be. Have a full scan carried out. If you drive a manual shift you could be lucky, because on an auto box the same speed sensors control the gear change. Regards John

Sep 09, 2012 | Cars & Trucks

1 Answer

Gas gauge is stuck on full. could it be the fuse?


most obvious cause is the float sensor in the tank but it could also be the speedo head ,what i would do is to pull the connector off the sensor under the back seat through the access panel and if gauge drops then its the sensor .if it doesnt drop then it most likely to be the speedo head but it could also be the wires are trapped under carpets where they run or a mouse has chewed them .

Nov 16, 2010 | 1998 Ford Taurus

3 Answers

Speedometer froze at 65mph. now it goes from 65 to above 120


The speedo head is electronically controlled and is fed it's information from the vehicle speed sensor, or VSS sensor, depending on engine and transmission the VSS directs information to the speedo head threw the computer so it has to be tested to see if it is OK. If there is no check engine light then it may mean it's the speedo head itself that is defective. You can try and remove it out of the dash and replace the speedo head but normally this has to be done by a certified mechanic He has to write on the work order the mileage on the truck and when installing the new speedo he has to put a stamp on your door with his company name and when he did the replacement head. There are no mechanical connections like o the older cars, it is fed threw the transmission computer vehicle sensor or how ever the power train management system it is not a mechanical problem except for the speedo head it self. The needle windings may have stuck or a piece of plastic could have broke off and wedged itself inside the head itself. If you want instructions on how to remove your speedo head I can give you the instructions to do so, The speedo head will come out and you can buy them at a junk yard and maybe the dealer if they still have them available, otherwise they sell it as a full instrument cluster set. There are after market parts you can by at Schucks, Nappa or Auto zone, they run about $150.00 dollers and normally have a white face with black letters. Hope this helps and if you need more help don't be bashful about asking.

Nov 29, 2009 | 2004 GMC Sierra

1 Answer

Intermittent problem speedo/odometer


would change the ECU with the chip from the key from a car in scrapyard ,but before you get carried away try another seperate earth on the back of the speedo printed circuit board ,i wouldnt mind betting this is your problem

Aug 13, 2009 | 2002 Ford SVT Focus

1 Answer

Insrument Panel Lost


Try a high tech solution...give the top of the dash a good smack with your hand. If the dash works, you will need to remove gauge face and clean the connector contacts.

Jul 28, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Speedo unit died then Fuel gauge went to max


the dash control board is the controler for the boards in the dash, fuel temp etc. inside the dash itself, a board on the rev counter controls voltage to feed the the fuel gauge etc. the back of the speedo burnt,there is the 3 pin voltage control chip on the board. you can replace the boards. you can remove them from another dash and place them into yours but if you say the board burnt out on the speedo . then i would just change the dash as it would be easier as you would need to replace the speedo as well. you will also need to inform dvla that the speedo has been changed as for mots its recorded. or have the speedo rectified to the right mileage. not informing dvla can affect your insurance.

Jun 30, 2017 | 1994 Audi Cabriolet

1 Answer

Ford focus mk1 speedo not working after install. of glow gauges


PUT THE NEEDLE BACK ON WITH THE KEY OFF AT OOOOOO

Jan 17, 2009 | 2003 Ford Focus

1 Answer

Second generation no speedo no tack


There is a speed sensor on the transmission. real easily changed. Very common

Oct 15, 2008 | 1994 Dodge Caravan

Not finding what you are looking for?
2000 Mazda MX-5 Miata Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...