Question about Ford Crown Victoria

1 Answer

95 ford crown victoria. has no cold air. unit is full compressor is running. worked great last year. where is the blend door? thanks

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. Please check that the heater core is not plugged and find the 2 coolant lines going to the heater core which are right next to each other with approx 3/4" hoses going to the engine. Now, warm up the engine with the heater on max (don’t turn on the fan). Next, feel if the hoses are warm or maybe hot. If they are not warm, then the heater core is plugged. A back flush will resolve the issue. If the hoses are warm then turn on the fan. One hose should go cold (or cooler than the other, actually should be about the same temp as the air from air vents, if there is a plug). If both hoses are hot and stay hot and there is no heat, then the problem is not with the heater core but with the blend doors. There are electric motors that operate the "blend doors" inside the dash directing air flow from the heater core and A/C evaporator core to the cab of the vehicle. If you feel a drastic difference in one of the radiator hoses, then replace the thermostat and see what happens. If all the heater and radiator hoses are pretty much the same temperature I would suspect a control problem in the dash controls or in the blend door operation. You’ll need to remove the dash to check these. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No cold air inside the car


try rechecking the blend door actuator and its connections, fuse, etc. also if your AC system is overcharged it will blow warm air.

Mar 23, 2015 | 2008 Ford Crown Victoria

1 Answer

I have a 2005 crown victoria,i have it on heat,heat comes out the vent,and when i switch over to defrost,cold air come out..what's the problem/


may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: digiprog 3

Jan 30, 2013 | 2005 Ford Crown Victoria

1 Answer

Ford crown victoria 2004 w/158194miles. DTC B1249.blend door failed or short


Is there ground?

Is there power and ground at the actuator?

Is there power or ground in the circuit when the system is off but the vehicle is running (Indicating a short to power or ground)

Oct 07, 2012 | 2004 Ford Crown Victoria

1 Answer

My heat works but it is blowing any air


have your blend motor checked and you blend door

Nov 08, 2011 | 1996 Ford Crown Victoria

1 Answer

Crown victoria Climate control is stuck on heat


ned to remove the radio and look at the blend door actuator on top of the hvac box. the actuator goes bad and doesn't move the door from hot to cold. if you see the actuator moving but still no cold air then the blend door could be broken.

Aug 01, 2011 | 2001 Ford Crown Victoria

2 Answers

2006 crown Victoria blows hot air with the air conditioner on the air condition lines are cold under the hood


sounds like the temperature blend door is either jammed or the actuator is shorted ou. when the temperasture control is moved you should hear the door moving...my guess is you are not hearing that..the actuator would be attached to the heater plenum behind dash/glovebox area...becareful to test the correct one as there will be a fresh air actuator and a mode door actuator as well...you can determine which one is which by changing the positions on heater head from hot/col, floor/defrost, recirculate and fresh air settings..each setting will move its designated actuatror..the one not moving would be you temp actuator....have fun!

Jun 29, 2011 | 2006 Ford Crown Victoria

1 Answer

Why want the heater switch from cold to hot


this problem is caused by a defective air temperature control blend door motor/actuator failing, this little motor moves a door deep inside the dash to either supply ho or cold air or a mix of the two air streams, hence the name "blend" door motor. to replace the part u must remove the dash assembly.

Oct 22, 2009 | 1993 Ford Crown Victoria

1 Answer

How does one reconnect the air suspension


You probably have a leak in the system. Did "they" check the lines and air suspension? "They" probably disconnected the compressor to keep it from burning out from overuse. You need to fix the leak before reconnecting or the compressor will wear out very quickly.

Aug 09, 2009 | 1995 Ford Crown Victoria

1 Answer

HOT & COLD ELECTRIC VENTS NOT MOVING.


Blend door actuator. When it fails for some reason it turns to the hot side and gets stuck. Dash must come out. I usually do it in 3 hours, because I've done it numerous times.

May 17, 2009 | 1997 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...