Question about 2008 Dodge Avenger
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
make your self a jumper set of wires to test with. Find out what makes what move on the old unit,write down the color wire,then apply power and ground to the new unit onw wire at a time.Mark down the color and what function it did.after testing both units then match your research and put the wires together.I wished I were there.Good Luck!
Posted on Jul 24, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Not sure if this will work for you but worth a shot. I own a 2005 dodge neon. I know the ecu's are different but maybe dodge was smart and made all the cars this way. Insert you key into ignition. Turn key forward until you are at the last position right before the car starts to crank over. Repeat this for a total of three times then on your digital odometer display, you will see a set of numbers displayed. this will be your code for the malfanction(s) that set your check engine light. Like I said, it might not work on your car but give it a shot. If not, rent an obdII scanner and get your codes. Then you know where to start looking to fix your problem.
Posted on Dec 17, 2009
SOURCE: Brake Fluid for 2008 Avenger
it's DOT 4 or DOT 5 check with your manual and sometimes it's even in the fluid fill cap.
Posted on Feb 22, 2010
Testimonial: "Quick response, guided me in the right direction. Thanks!"
Tips for a great answer:
Mar 11, 2015 | Dodge Avenger Cars & Trucks
Nov 12, 2014 | 2008 Dodge Avenger
Jul 14, 2014 | 2011 Dodge Avenger
Aug 30, 2013 | 2008 Dodge Avenger
Nov 04, 2012 | 2008 Dodge Avenger
Aug 11, 2011 | 2008 Dodge Avenger
Dec 29, 2010 | 2008 Dodge Avenger
Dec 13, 2009 | 2008 Dodge Avenger
331 people viewed this question
Usually answered in minutes!