Question about 2004 Pontiac Grand Am

1 Answer

DIAGRAM OF 2004 3.4L ENGINE DISTRIBUTOR SYSTEM

NEED DESCRIPTIVE DIAGRAM OF 2004 3.4L ENGINE DISTRIBUTOR SYSTEM. JUST BOUGHT USED 2004 GRAND AM. WAS JUST LEAVING HOME AND CAR DIED OUT. PROBLEM WAS NOT PASSLOCK. ENGINE WOULD CRANK BUT NOT TRY TO START AT ALL. CHECKED ALL FUSES AND RELAYS, WERE GOOD. CHECKED PLUGS AND WIRES, WERE GOOD. BEGAN CHECKING ALL VISIBLE SENSORS AND CONNECTORS. FOUND ONE PARTIALLY MELTED AND SMELLED BURNT. NEED TO REPLACE CONNECTOR. DONT KNOW WHAT IT IS CALLED. GOES ON OPPOSITE SIDE OF AIR INTAKE UNIT. WIRE COMES OUT OF A BUNDLED WIRE UNIT AND CONNECTS TO SIDE OF COIL PACK.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 5,763 Answers

Okay your talking about the control module,this unit sits flat and the coil packs sit atop it, then theres two connectors on one side and another connector on the other side,here are some pictures of it hope this is the right part,there are no coils on this one but the coils sit on top also here are the connecotrs for it, napa auto parts sells them,they are called ignition control module connectors or plugs, hope this helps.DIAGRAM OF 2004 3.4L ENGINE DISTRIBUTOR SYSTEM - 013ec37.jpga85fdac.jpgf854f86.jpg

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 grand am was driving home battery was about to die so i tried to make it home before it died


Can't say what the thud was..but it certainly sounds like your alternator is not charging your system.. When it isn't charging and the car is running off the battery the car will do some weird things as it loses its.battery power then just die....Auto zone should have found that and not just charge the battery..get yourself a small car charger at autozone $25 -40 or so and charge it again and have them make a full charging system check..good luck..

Oct 22, 2014 | Pontiac Grand Am Cars & Trucks

1 Answer

I just bought a 2005 grand prix and the engine dies at start up and i have to press the gas pedal to raise the rpms. does this mean a tune up is needed or a fuel system cleaner


could need both, or it may need to have the timing checked. also check to make sure all your wires are in good shape & securely fastened to the plugs & your distributor has no cracks. may need to replace if does as had same prob with 2003 nissan xterra bad cap replaced cap & spark plug wires ran like new again

Aug 19, 2012 | 1999 Pontiac Grand Prix

1 Answer

Vacuum diagram 1998 dodge grand caravan


Hi there:
I suggest check this image about engine vacuum diagram for the 3.3L and 3.8L engines - 1997-99...

6_10_2012_1_09_31_am.gif

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 09, 2012 | 1998 Dodge Grand Caravan

2 Answers

Need the spark plug diagram for a 77 gmc 454 engine


zjlimited_580.jpg

V8 engines with points-type ignition system Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise



zjlimited_581.jpg

V8 engines with electronic distributor ignition system Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise


Hope heslp.

Jan 30, 2011 | Cars & Trucks

1 Answer

I have a 1998 jeep grand cherokee with a 4.0 engine. As I was driving, the engine died. I have replaced the spark plugs, distributor cap and rotor, crank sensor, cam sensor and coil. It will turn over, but...


You really should be using a good manual as a guide fro testing. For wiring diagrams chiltons is better than haynes. Have you checked power flow through the ASD relay??

Jan 14, 2011 | 2000 Jeep Grand Cherokee

1 Answer

Just wondering if you have a breakdown diagram for a 1992 dodge colt 1.5l distributer


I do not have a breakdown diagram for a distributor, but just the firing orders and description of ignition system for the Dodge Colt and related models (based on Chilton manuals) if that's what you're looking for: FIRING ORDERS Fig. 1: 1990 1.8L SOHC Engines Firing order: 1-3-4-2 Rotation: clockwise 84182009.gif

Fig. 2: 1.6L DOHC Engine Firing order: 1-3-4-2 Distributorless Ignition 84182010.gif

Fig. 3: 2.0L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182011.gif

Fig. 4: 1.5L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182012.gif

Fig. 5: 1993 1.8L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182013.gif

Fig. 6: 2.4L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182014.gif

To avoid confusion, replace spark plug wires one at a time. --- Distributor REMOVAL & INSTALLATION Although the distributor can be removed from the engine no matter which cylinder is about to fire, it is a good idea to have number one cylinder at TDC before distributor removal. 1.5L, 1.8L, 2.4L SOHC Engines
  1. Disconnect the negative battery cable.
  2. Disconnect and tag the spark plug wires from the distributor cap.
  3. Disconnect the distributor harness connector.
    Fig. 1: Ignition system for the 2.0L engine 84183001.gif

    Fig. 2: Ignition system for the 1.5L engine 84183002.gif

    Fig. 3: Ignition system for the 1992-93 1.8L engine 84183003.gif

    Fig. 4: Ignition system for the 2.4L engine 84183004.gif

  4. Loosen the distributor retaining bolt and remove the distributor from the engine. To install:
  5. Rotate the engine until No. 1 cylinder is at TDC on its compression stroke. NOTE: Be careful not to turn it to the No. 4 cylinder TDC on its compression stroke by mistake.
  6. Align the distributor housing and gear mating marks.
    Fig. 5: Ignition system for the 1990 1.8L engine 84183005.gif

    Fig. 6: Distributor installation for the 1990 1.8L engine 84183006.gif

    Fig. 7: Distributor installation for the 1992-93 1.8L engine 84183007.gif

  7. Install the distributor into the engine, while aligning the fine cut (groove or projection) on the distributor flange with the center of the distributor mounting stud.
  8. Install and tighten the distributor retaining bolt.
  9. Reconnect the distributor harness connector.
    Fig. 8: Distributor installation for the 2.4L engine 84183008.gif

    Fig. 9: Distributor installation for the 1.5L engine 84183009.gif

    Fig. 10: Distributor installation for the 2.0L engine 84183010.gif

  10. Install the distributor cap and spark plug wires.
  11. Reconnect the negative battery cable.
prev.gif next.gif prev.gif next.gif

Oct 11, 2010 | 1992 Dodge Colt

2 Answers

My timing belt and water pump for Honda Accord 1990 was replaced and used the car for 2- 3 weeks. After driving about 15 minutes, entering the freeway, my car slowed down but the engine still running....


If you have never changed that distributor on your 1990 Accord, I would suspect it. Check for spark while cranking. The sensors inside the distributor would usually heat up, after 15-20 minutes of running, and would then die out, until the car is cooled off for a while. Look into that distributor.

Oct 07, 2010 | 1990 Honda Accord

2 Answers

What is the firing order for a grand cherokee laredo. I change the distributor for sgrand cherokee laredo jeep. I lined up tdc, had the rotor turned to number 1, but it is still missing.


You didn't post your engine size so please choose the apprpriate diagram:



148dbd9.gif

1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise



cc5a81b.gif


2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise



427e129.gif

4.0L Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise



35fbd17.gif

5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

May 12, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Fuse box diagram for 1995 jeep grand cherokee laredo


I have the same model Grand Cherokee Limited 5.2L V8, nice truck; for fuse panel description and locations, check page 7 and next. All the infor that you need is here: Jeep-ZJ-Grand Cherokee-Secc-8W-Wiring-Diagrams.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 13, 2009 | 1994 Jeep Cherokee Country

1 Answer

1998 jeep grand cherokee, with 4.0 6 engine will run fine most of the time. then it will be hard to start, miss, and die. then when it will start will run rough, die, and then it run fine for a while. i...


OK...if someone gives me a bad rating on this, I'll be really annoyed...
saw off the "fixed" hold-down on the distributor and use a chevrolet smallblock hold-down. Once re-installed turn distributor ccw about 1/4" or slightly more. If I'm correct, engine should run fine after that.

Apr 15, 2009 | 1998 Jeep Cherokee Grand 2WD

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

600 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...