Question about Ford F-150

3 Answers

I have a 1992 ford 150 truck transmission would not shift i put a new rebuilt trans. and it's doing the exact same thing which when it change gears it will go back to low gear won't shift out AOD type

Posted by on

  • pimp6334 Jun 01, 2010

    I never got an answer from the first question i'm still waiting

  • pimp6334 Jun 02, 2010

    where and what is the ECU is and where is it located

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

Hmm is the box computerised ???? check the ecu on the truck for error codes,, i'm betting it will say solinoid error,, clear it and you will be fine..

Posted on Jun 01, 2010

  • Rishi Roshan Ali Jun 02, 2010

    the ecu,, is the computer in the vehicle,, Its located under the dash board,, u need a mechanic with a diagnostic tool, code reader,, to check it..

×

What transmission do you currently have installed in your 1992 Ford F150? Ford made two different transmissions for that year and model

http://www.fordf150.net/forums/viewtopic.php?f=4&t=85453

Posted on Jun 01, 2010

  • pimp6334 Jun 01, 2010

    i have an AOD type transmission

  • Anonymous Jun 02, 2010

    The ECU (also known as a ECM) is the vehicles computer and it is located behind the factory radio or under the passenger side kick panel



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford transmission problems


3000 rpm's isnt horrible since your torque converter doesn't engage until 1100 rpm's or so. A possible adjustment might help your shifting problem. so you might want to visit your mechanic
a rebuilt trans is never going to be like new. it's going to be different since some parts are used parts with 120K. this is if you mean the vehicle has 120k on it, not the rebuilt trans. If the rebuilt trans has 120k on it, the story has just changed and its not a nice ending.

Dec 30, 2013 | Cars & Trucks

1 Answer

My tarus the transmission is slipping its a 1992 it has 87 thousand mileson it what can i do to stop that from happening


You could change the filter and put in new fluid. It might work but if it doesn't it will need to be rebuilt. First thing before you do anyof this is to make sure you have enough fluid in the trans.

Jan 31, 2010 | 1992 Ford Taurus

1 Answer

1990 ford F 150 transmission wont shift out of first gear


My old boss used to throw em in PARK too - I thought he was nuts!!! best to try a product like LUBEGARD or something first, other wise the governor will need to be cleaned

Sep 28, 2009 | 1990 Ford F150

3 Answers

How do I drain & refill the automatic trans 2004 Ford Explorer


neeed to get rebuilt trans no matter what goop you put the trans

Jan 26, 2009 | 2004 Ford Explorer

3 Answers

E40d trans will not shift into 3rd or 4th gear, only rev. 1+2


check or replace your thottle position sensor tps that trans needs to know where the throttle is to shift if it is bad it will do as you say wont shift to third
another telltale is it will act like it goes into lockup when shifting into reverse and stall the engine

Jan 23, 2009 | 1995 Ford Club Chateau

2 Answers

Transmission-overdrive not working properly


check the transmission fluid first .
============
overdrive allows the engine to run at lower RPM's , which increases the fuel
economy and also the transmission runs cooler

Dec 15, 2008 | 1989 Ford Ranger

1 Answer

1994 F350 transmission intermittent problem


I had the same problem in my 96 f-350. The transmission has slipped recording a slip code in the transmission. You can pull the codes and get it. I shifts into a safe mode that increases the pressure inside your transmission as part od a fail safe. Plain and simple, you have to have the tranny rebuilt.

Dec 06, 2008 | 1994 Ford F350 Crew Cab

1 Answer

My car doesn't change gears, it's runing in hght gear only.


you need to get a new transmission control module, i had the same problem when i bought my 92 from the auction, i wouldn't shift from 1st to 2nd, so i found a rebuilt unit on the internet and it corrected the problem, you also might want to remove the excess tranny fluid that every one put's in when they have a tranny problem.

Nov 21, 2008 | 1992 Mitsubishi Diamante

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...