Question about 1995 Ford Aspire

2 Answers

Thermstate location - 1995 Ford Aspire

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thermstate location for 1997 Mercury villager gs with 3.0l enger

Posted on Jun 14, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 80 Answers

Hope this helps. It is on the end of the cylinder head where the big hose is going in.. :-)

Posted on Jun 01, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

It overheats when the ac is on already replaced the thermstate

Have the radiator cleaned bu a radiator shop, commonly called a rod out. Or just replace it with a new one which are really cheap.

Jul 27, 2012 | 1999 Dodge Durango

1 Answer

Where is the thermstate located

On most vehicles, I'd say about 96% of vehicles, follow the upper radiator hose to the Engine. There should be a Thermostat Housing. This looks like:


Mar 14, 2011 | Chevrolet Venture Cars & Trucks

2 Answers

I changed heat tempt sensors in the intake and the heat tempt sensors on raditor and the enjine light is still on coolant and i changed the thermstate and coolant full on 200 grandprix

Well, I recommend that you pull the error codes from the computer. Some parts shops, and many lube shops can pull the error codes. It sounds like the items you have replaced were not causing errors.
Rather than guess, get the codes. Totally less costly to focus on the system triggering the error and check engine light.

Jan 16, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

Not heating thermstate been replace 3 times

We could discart the thermostat, according that your recently replace, may have a stuck open thermostat, cheapest.

I guess that you may have a problem with the temperature mode selector or if it's auto HVAC, many possible problems. Also could be low on coolant, therefore no coolant in the heater core to get warm. Check coolant level first.

Then get it scanned to see what the ECM is seeing for temperature. Then feel both heater hoses to see if they are cool, warm or hot.

Keep us updated.

Dec 27, 2010 | 1997 Buick LeSabre

1 Answer

I have a bmw series 3 on a t plate it keeps over heating so the red light comes on i took the thermstate out but that didnt work and i have wired up fan so constatnt running that hasent helped, and the...

Well, you could have a head gasket leaking into the cylinder.

There must be a leak somewhere.

Also, the system may need to be flushed.

Also, check to see if the water pump has been changed with an opposite impeller.

This happened to me once on a car that had the wrong water pump installed.

Good luck on this one.

Jul 05, 2010 | BMW 318 Cars & Trucks

1 Answer


at the end of the upper radiator hose.

Jun 05, 2010 | 1995 Ford Econoline

2 Answers

I recently just had new front and back brakes put on my 1998 plymouth van and the brake light is stll on and my brakes are going all the way to the floor when I'm coming to a stop. I have to put brake...

First - it's old, things break.
Your brake line somewhere is leaking. I good repair place would / should have seen this.
The brake light is because the car thinks the PARKING brake is on, not because the brakes need to be replaced.
Chrysler products that I have owned from 1990 to 1998 have had a problem with blown head gaskets. A 1998 Plymouth Breeze being the last one that I had to replace the head gasket in. The exhaust leaks into the coolant and forces it out, and the car runs hot.
Junk it and get another van!

Jan 04, 2010 | 1998 Plymouth Voyager

2 Answers

I just replaced my alternator, now my car over heats BUT all of the fans are working

check fluid level,check the radiator cap seal, if worn replace,have you ever serviced the radiator? it may be resricted, check hoses for leaks,try changing the thermstate

Oct 07, 2009 | Acura TL Cars & Trucks

1 Answer

Heater blowing cold air flushed out radiator and replaced and replaced thermstate

If heater core is plugged coolant will bypass it during operation or flushing. It needs to be flushed out by removing the heater hoses (best done at engine ends) and filling the core with white vinegar...Wait about a half hour then flush out with a garden hose. Check for flow through the control valve on the hoses and make sure that the plenum doors are working inside the heater box.(doors can get stuck and control motors can fail).

Oct 07, 2009 | 1996 Jeep Cherokee

1 Answer

No heat in car

the thermostat is located in the water neck housing (thermostat housing) located at the end of the top radiator hose at the engine, follow the top radiator hose toward the engine

Apr 03, 2009 | 1997 Lincoln Town Car

Not finding what you are looking for?
1995 Ford Aspire Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides