Question about 2004 Dodge Ram

1 Answer

Cold air only on left two dash vents,hot air on the right side.

My ram is a 2005 and i would like to know how to change door actuator

Posted by on

  • Greg-556 Jun 01, 2010

    Are you talking about the door lock actuator or the window regulator?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 39 Answers

Go to pdftown.com and download the service manual for free. I think the 2005 one is corrupt tho......so get the 03 or the 06. Otherwise go on the Dodge or the Cummins forums and they have all kinds of help and advice and often photo walk-thru's of all kinds of repairs.

Posted on Jul 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 2500 6.0 Silverado ac blows HOT on alternate sides of vehicle while in Auto A/C mode.


Douglass, Your A/C may have lost it's programming, blend door actuator could be faulty or A/C could be low on refrigerant. You may have to take in and have a good Tech. diagnose and estimate repair.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Dual climate controls drivers side hot passengers side cold have 2004...
hot on driver side
Drivers side vents will blow hot air while is turned on but passenger side...

Jul 26, 2016 | 2004 Chevrolet Silverado 2500HD

1 Answer

I have a 2008 Toyota Corolla and heat on the left side and the right side is cold, what to do?


Heat is blowing on passenger side, but cold air ... - RepairPal

repairpal.com > Questions > Dodge > Ram 1500 > 2002 Dodge Ram 1500
Dec 7, 2009 - When I turn on the heat, the passenger side is receiving warm/hot air but ... blow hot air on the drivers side and it would get cold right away. about a week ago... I have a 2008 Dodge Ram 2500 SLT. ... Regardless of the settings cold air blows from the left vent and on the floor on driver and passenger sides.

Temperature Blend/Recirculation Doors May Fail and ...

repairpal.com > Problems > Jeep > Grand Cherokee
2008 Jeep Grand Cherokee143,000Visitor. I get cold air on driver side and warm air on the passenger side. Upvote (29) ... right side air is always at the coldest. no heat on the right side and air temp will not change, left side works good. .... Models: · Honda Accord; ·; Toyota Camry; ·; Honda Civic; ·; Acura TL; ·; Toyota Corolla ...

Heating and AC Temperature and Air Delivery Mode Do


Jan 16, 2016 | Toyota Cars & Trucks

1 Answer

My 2005 ford free star. When I turn on m heater it only blows heat on the right side and cold air on the right side


There is a module that controls hot/cold direction flow, which does go bad. It's called a Heater Blend Door Actuator, and It's a bear to replace it, but doable. Not too expensive to do it yourself, but you _do_ need to be sure you're buying the exact replacement. You're best bet is to remove it before buying the replacement. The photo of the replacement is all you need to see you're buying the right one. Ford used different models in the same vehicles.

http://www.rockauto.com/en/catalog/ford,2005,freestar,3.9l+v6,1430707,heat+&+air+conditioning,heater+blend+door+actuator,10721

Feb 21, 2015 | 2005 Ford Freestar

1 Answer

The air only comes out of the circle vents on dash, not the defroster vents or floor vents. I have a 2005 Pontiac G6 base model and I am not sure how to fix this issue


In side you dash is a electronically controlled actuator call a mode actuator , it controls which vents the air comes out of ! They go bad, plastic gears in side of it wear out, a lot of times you'll hear a clicking sound in the dash. They are not to tough to fix ,you need to take Instrument Panel Insulator Panel off - Left Side under dash . Some times stuff drops down in an binds up the door inside .Have a little child , they like putting stuff in the vents ,pencil's an the like.
Mode Door Actuator Dorman 604 121 Controls Airflow Direction

Jan 10, 2015 | 2005 Pontiac G6

2 Answers

Heat comes thru driver's side vents, but blows cold air thru passenger side vents


You likely have a faulty blend door. It could be electrically, mechanically related, or even a broken door. It may be the blend door motor, or possibly the temp sensor.

Dec 30, 2012 | 2010 Ford Flex

1 Answer

Temp light flashes when car start up. turn on heater and blows cold air on passenger side, and barely warm on driver side. No blowing air from defroster. Will work occasionally but usually it is this...


Air Door Actuators/Motors Removal & Installation Recirculation Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the left sound insulator panel.
  2. Disconnect the vacuum hose from the recirculation actuator.
  3. Remove the recirculation actuator from the valve.
To Install:
  1. Connect the recirculation actuator to the valve.
  2. Clip the recirculation actuator to the air inlet.
  3. Connect the vacuum hose to the recirculation actuator.
  4. Install the left sound insulator panel.
2000 - 2005 2000 - 2005 Recirculation Actuator gm-10-00-1559.gif

To Remove:
  1. Remove the instrument panel compartment.
  2. Remove the right sound insulator.
  3. Remove the dash integration module from the bracket.
  4. Remove the 2 dash integration module bracket fasteners and position the bracket to gain access to the recirculation actuator.
  5. Disconnect the electrical connector from the recirculation actuator.
  6. Remove the recirculation actuator.
To Install:
  1. Install the recirculation actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the recirculation actuator.
  3. Install the dash integration module bracket and torque the fasteners to 12 in-lbs (1.4 Nm).
  4. Install the dash integration module into the bracket.
  5. Install the right sound insulator.
  6. Install the instrument panel compartment.
  7. Recalibrate the actuator.
Defroster Valve Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Unclip the defroster valve actuator from the air inlet.
  3. Disconnect the defroster valve actuator from the valve.
To Install:
  1. Disconnect the defroster valve actuator from the valve.
  2. Clip the defroster valve actuator from the air inlet.
  3. Install the air distributor assembly.
Heater/Bi-Level Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Remove the clip and the screws that fasten the 2 halves of the air distributor assembly and separate the air distributor assembly.
  3. Unclip and disconnect the heater/bi-level actuator from the valve.
To Install:
  1. Connect and clip the heater/bi-level actuator to the valve.
  2. Fasten the 2 halves of the air distributor assembly together and torque the fasteners to 13 in-lbs (1.5 Nm).
  3. Install the air distributor assembly.
Temperature Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the instrument panel assembly.
  2. By snapping the rod out of the valve, remove the temperature valve link rod from the temperature valve.
  3. Disconnect the electrical connector from the temperature actuator.
  4. Remove the temperature actuator.
To Install:
  1. Install the temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the temperature actuator.
  3. Start the vehicle.
  4. Set the fan to position to high.
  5. Set the temperature to full hot.
  6. Allow a minimum of 45 seconds for the temperature valve actuator to move to the full hot position.
  7. Move the temperature valve to the full hot position.
  8. Snap the temperature valve link rod into the temperature valve.
  9. Install the instrument panel assembly.
Mode Actuator 2000 - 2005 Mode and Left Air Temperature Actuator gm-10-00-1560.gif

To Remove:
  1. Remove the left side sound insulator panel.
  2. Remove the knee bolster.
  3. Remove the instrument panel cluster. (Automatic HVAC)
  4. Disconnect the electrical connector from the left air temperature actuator. (Automatic HVAC)
  5. Remove the left air temperature actuator. (Automatic HVAC)
  6. Disconnect the electrical connector from the mode actuator.
  7. Remove the mode actuator.
To Install:
  1. Align the mode door levers with the cam slots.
  2. Install the mode actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  3. Connect the electrical connector to the mode actuator.
  4. Install the left air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm). (Automatic HVAC)
  5. Connect the electrical connector to the left air temperature actuator. (Automatic HVAC)
  6. Install the instrument panel cluster. (Automatic HVAC)
  7. Install the knee bolster.
  8. Install the left side sound insulator panel.
  9. Recalibrate the actuators.
Left Air Temperature Actuator 2000 - 2005 Mode and Left Air Temperature Actuator gm-10-00-1560.gif

To Remove:
  1. Remove the left side sound insulator panel.
  2. Remove the knee bolster.
  3. Remove the instrument panel cluster.
  4. Disconnect the electrical connector from the left air temperature actuator.
  5. Remove the left air temperature actuator retaining screws.
  6. Remove the left air temperature actuator.
To Install:
  1. Install the left air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the left air temperature actuator.
  3. Install the instrument panel cluster.
  4. Install the knee bolster.
  5. Install the left side sound insulator panel.
  6. Recalibrate the actuators.
Air temperature Actuator (Manual), Right Air temperature Actuator (Automatic) 2000 - 2005 Right Air Temperature Actuator gm-10-00-1561.gif

To Remove:
  1. Remove the instrument panel compartment.
  2. Disconnect the electrical connector from the air temperature actuator.
  3. Remove the right air temperature actuator.
To Install:
  1. Install the air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the air temperature actuator.
  3. Install the instrument panel compartment.
  4. Recalibrate the actuators.
prev.gif next.gif

Nov 03, 2010 | 1998 Buick LeSabre

1 Answer

Ac blowing hot air


the blend door actuator located on the air box (right hand side under dash) is prob. inop. worst case senerio the blend door its self is broken. I have replaced the actuator more than anything.

Sep 16, 2009 | 2005 Chevrolet Silverado

1 Answer

2005 toyota tacoma air conditioning cold on left, warm on right


I would not suggest repairing yourself. Sounds like a blend door actuator. Not to sure on a toyota because i know more about domestic but i believe that the dash needs to be taken apart to replace this part or to atleast examine your duct work behind the dash. Hope this helps! ~Derek~

Jun 20, 2009 | 2005 Toyota Tacoma

2 Answers

1998 buick park avenue drivers side blows cold, passenger side hot


sounds like the drivers temp door actuator is not working should be located on the drivers side of the air box down by the gas pedal or center dash area

Oct 03, 2008 | 1998 Buick Park Avenue

Not finding what you are looking for?
2004 Dodge Ram Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...