Question about Chevrolet Impala

2 Answers

MY 2005 IMPALA TURN SIGNALS AND HAZARDS STOP WORKING BUT ALL MY FUSES ARE GOOD

Posted by on

  • caner62391 May 31, 2010

    MY 2005 IMPALA TURN SIGNALS AND HAZARDS STOP WORKING BUT ALL MY FUSES ARE GOOD and they dont come on in the dash either

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

Are you suer that all the fuse/flasher for Turn / Hazard lights are OK? (Page 342 from Owners Manual)

MY 2005 IMPALA TURN SIGNALS - 21a9b5f.jpg

After to check the FUSE/FLASHER, and check the bulbs, I suggest check this wiring diagram for 2005 Chevrolet Impala...

3af9a63.jpg

Fig. Front Park, and Turn/Hazard Lamps (Impala)(c) (2005)

Hope this help.

Posted on May 31, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Are the turn signals in the dash working when you turn it on? If it is, We may only have bulb problems. The bulbs may just be faulty and needs replacement, you can notice a blackish color when the bulbs is faulty. Hope this helps and have a good one!

Posted on May 31, 2010

  • caner62391 May 31, 2010

    no they dont come on in the dash

  • dj_relly999
    dj_relly999 May 31, 2010

    Thanks for the clarification. Fuse may be good but I believe that the turn signal switch is faulty. The turn signals are interconnected with the hazards that when one is bad, both of them fails. Please check the relays under the hood too for they may be blown and needs replacement.

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: 2005 CHEVY IMPALA TURN SIGNALS AND HAZARDS DONT

replace the switch on the dash for the hazards the flasher is built in with the switch for the signals

Posted on Dec 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My turn signals and hazard lights stopped working


Hazard switch..had it happen to my 2002 impala

Dec 13, 2013 | 2001 Chevrolet Impala

1 Answer

Where is the turn signal and hazard flasher located on a 2005 chevy impala


I believe it is all one unit built into the hazard switch in the center of your dash. Usually the hazard switch goes out on these. Replace the hazard switch and your turn signal and Hazards should work properly again.

Jul 07, 2013 | Cars & Trucks

1 Answer

2005 Impala, directional signals inoperative. Flashers are working. Replaced the hazard warning switch. Still no directional signals, hazards work. Now, car will not start.Buzzing sound from hazard sw


There is a good possibility that the hazard warning and directional signal lights have nothing to do with the starting or operation of the engine. There are many things that might cause the car to fail to start. The battery must be fully charged, and in good working condition. No corrosion on the terminals. good solid connections. When you turn the key the starter motor should turn the engine over. If that works the carburetor will need gas. If you have gas and spark, the engine should run. Hope that helps.
Turn signals work with the tail lights and parking lights on the front. You should turn on the Head lights and check to see if the tail lights and parking lights come on. You will also want to check to see if the flasher is plugged in. All the light bulbs must be plugged in and working to operate the flasher for the turn signals. good luck

Oct 10, 2017 | 2005 Chevrolet Impala

2 Answers

We are trying to replace the turning signal flasher on my 2005 Chevy Impala. I can't find out where it goes, please help me. terryjenny@winco.net.


ITS IN SIDE TO FUSE BOX ITS ROUND AND LARGER THEN ANYTHING ELSE IN THE BOX IT JUST UNPLUGS IF YOU DON;T LOOK ON THE BACK OF THE BOX

Oct 19, 2010 | 2005 Chevrolet Impala

2 Answers

2005 CHEVY IMPALA TURN SIGNALS AND HAZARDS DONT WORK ALREADY REPLACED FUSES


The hazard button is probably bad it controls your blinkers and hazards. Push around on it and see if you can get it working. There was also a recall on these if your car meets requirements the dealer can tell you if yours is covered All you need to give them is the VIN number

Dec 03, 2009 | 2005 Chevrolet Impala

1 Answer

My blinker lights wont work by themselfs but theyll work on the hazards and the fuse is good i dont know whats wrong


It is the switch. Some call it a combination switch. The lever that works the turn signals, may also work the wipers thats why its called a combo switch. If the work with the hazards, then that tells you that the fuse, wiring, bulbs are all good. Has to be the switch.

Sep 03, 2009 | 2005 Chevrolet Impala

2 Answers

04 impala turn signals stop and starti ntermitently


The turn signal flasher is built in to the hazard switch. They are common for going bad. If the turn signals quit again, try pushing the hazard switch on and off a bunch of times really quick. If the turn signals start working again, replace the hazard switch

Aug 31, 2009 | 2004 Chevrolet Impala

2 Answers

Is there a relay fuse box for 05 chevy impala turn signals


just a flasher assembly build into the hazard switch. It is common for this part to die.

Jul 05, 2009 | 2005 Chevrolet Impala

2 Answers

Turn signals and hazard don't work


Next best guess is the flasher unit has failed, this could be your little blue box, pick up a replacement at any auto parts store and replace it.

Apr 15, 2009 | 2005 Dodge Caravan

1 Answer

I have a 2003 Chevy Impala and the turn signal stopped working.


we had the same problem with our 2003 impala...took it to the shop and was told it was the hazard lights.

Mar 16, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...