Question about Kia Sorento

1 Answer

How do you remove ign switch hold down bolt in 03 kia sorento

Posted by on

  • ashley14518 May 31, 2010

    thanks for info

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 22,095 Answers

If you want to remove the barrel then you will need the key in the aux position ,look on the new one to locate the location or the retaining pin ,then with the key in the lock turned to aux position push the pin down to pull the barrel out .but as you havent stated why you want to change the barrel then if you have lost the key you will have to cut the whole steering lock off .Make sure you remove the transponder before you do this then you will have to have the vehicle taken to the dealer to have the chipped key re-programmed.Now sometimes if you have access then the bolts that hold the steering lock on which have had the heads broken off can if your lucky be tapped loose with a centre punch ,but in all honesty i have only managed this a few times another thing that some vehicle have is the locating pin that has to be pushed down to remove the barrel havent got the hole drilled out so you will have to locate it then drill it if this year vehicle is like this but this is normally only on VW vehicles.

Posted on May 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 KIA Sorrento 2.4 were is the fuel pressure regulator located. put on adjustable fuel reg .need to disconnect stock one


fuel pressure regulators are normally located in the fuel manifold. They are either vacuum controlled or electronic controlled to maintain the right fuel pressure for engine requirements and to shut off the fuel pump when the ignition is turned off
If your manually adjusted unit will not do all that then you are asking for fault codes to appear and all sorts of problems to occur

Jan 18, 2016 | Kia Cars & Trucks

1 Answer

Rear brakes on 2011 kia sorento


You will likely find there are two bolts holding the calipers on the 2011 Kia Sorento. You can check this by parking your Sorento, setting the parking brake to be sure it won't roll and carefully lifting and removing one of the rear wheels, just like you are removing a flat.

When you remove the wheel, you should find that the brake caliper carrier is accessible on the rear top of the wheel assembly. Simply reach around and carefully feel the carrier assembly and you should feel a couple of bolt heads because two bolts are generally used to hold down Kia rear calipers.

Jan 03, 2015 | 2011 Kia Sorento

1 Answer

How to change headlight on a 2008 kia sorento


unplug wiring back of headlight, you will see 2 or 3 bolts holding h/light you need to remove them, if light still cannot be removed you will have to remove the front bar to access bolts under headlight

Jan 13, 2013 | Kia Sorento Cars & Trucks

1 Answer

How is the best way to replace a serpentine belt on a 2005 kia sorento


First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a Socket set and loosen these two belts by turning the tension adjustment bolt, Anti-Clockwise.

You have to remove the first two belts (AC & Power Steering) before reaching the Serpentine Belt.

Now loosen the nut on the front of the lowest pulley before loosening the serpentine belt.

To loosen the serpentine belt, you could either remove the metal skid plate at the bottom of the engine by turning the tension adjustment bolt, Anti-Clockwise or reach down from the top and loosen it with the socket set ( quick & easiest)

Sep 13, 2011 | 2005 Kia Sorento

1 Answer

How to change a transmission filter in 2005 kia sorento??


the filter is inside the drain pan so you need to remove the pan. its just a bunch of 10mm bolts and 1 bolt holding the dipstick tube in place. get a new pan gasket also.

Feb 19, 2011 | 2005 Kia Sorento

1 Answer

How do I replace the radiator in my 2004 kia


I don't currently have access to step by step instructions for your Kia Sorento, but I would imagine that it takes a standard tool ratcheting tool set to unscrew the bolts for the shroud, and lift any fans out of the way. Then, the radiator hold down hardware can be removed and the radiator should be disconnected fromt he cooling system (via the hoses) and then you can pull it out. It does not weigh much.

Installation is the reverse of the removal.
---
recalls for engine follow:

Gasoline Engines
2004 KIA SORENTO


03/01/2009 KIA REMANUFACTURED ENGINE PROGRAM 01/01/2004 CYLINDER BLOCK DAMAGE - HEAD GASKET LEAK - POOR RUNNING OR HARD START, EXCESSIVE WHITE SMOKE AND/OR COOLANT SMELL FROM EXHAUST, MISFIRE DTC - REVISED 06/01/2005 LOCKNUT RE-USE PROHIBITED 07/30/2007 CRANKSHAFT PULLEY BOLT REPLACEMENT

Jul 21, 2010 | 2004 Kia Sorento

1 Answer

03 kia soronto; main relay buzzes w/ ign off remove fuse marked p/trn buzz quits leave fuse in will eventually will kill battery


Just tow choice in your 2003 Kia Truck Sorento 3.5L SFI DOHC 6cyl:
- Your Ignition Switch is damaged; or,
- Your wires for the Warning Buzzer Relay is damaged.

Even when the OFF position any connection is open and drain your battery.

Check it and tell us news.

May 31, 2010 | 2003 Kia Sorento

2 Answers

CAN/T FIND THE SPARK PLUGS ON A 03 KIA SORENTO


The 2003 Kia Sorento with V6 has the spark plugs located under black plastic covers in the center channel of each cylinder head. Several brackets, cables, and hoses must be moved out of the way to access them. The manifold air intake tube needs to be removed on the right bank.
The left cylinder bank has coil-on-plug assemblies while the right bank has more conventional spark plug caps with sealing assemblies. The coil-packs are held with two 10mm bolts each and are difficult to get to. Use universal-joint sockets and an extension.



Apr 06, 2009 | 2004 Kia Optima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...