Question about 2005 Chrysler 300

1 Answer

Chryler 300 will not come out ofpark - 2005 Chrysler 300

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Look at the floor counsel
you might see a little cover near L
if not you will have to remove the cover in order to get to the shift lock solenoid

push the button shown here as #2 and you'll be ale to more out of part
chryler 300 will not come - 5b7dc60.gif

Posted on May 31, 2010

  • 5 more comments 
  • brighteyes30 May 31, 2010

    tried to press the button but it still want come out of park

  • Sean Reisdorf
    Sean Reisdorf May 31, 2010

    does the button feel "soft" or "hard"
    did you push down, forward or aft



  • brighteyes30 May 31, 2010

    it feels soft and we pushed it in and down but nothing happened.

  • Sean Reisdorf
    Sean Reisdorf May 31, 2010

    well then the bad news is that the shifter may be broken

    you will need to continue disassembling to find the shifter cables and then disconnect the cables

    if you still cannot shift then you know you have to replace the shifter

    but before you do all that make sure to disconnect the wiring harness to the shift lock solenoid





  • brighteyes30 May 31, 2010

    is the anyway you can disconnect it? If not how much is that to have fixed?

  • brighteyes30 May 31, 2010

    when u put your foot on the break you hear a click noise but it still want move

  • Sean Reisdorf
    Sean Reisdorf Jun 01, 2010

    that button (#2) you pushed is the solenoid in question
    since you pushed it and cannot move the shifter the concern must be there

    however, I wanted you to disconnect the solenoid, electrically, just to make sure there is not any feedback


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a koolertron radio/dvd/gps for chrysler 300. gps quit working


If it's dead, check fuses, or power connection. Otherwise avoid Chrylers.

Nov 21, 2016 | Chrysler Cars & Trucks

1 Answer

When at idle my chryler 300 when I start out will Rev up and down and give it more throttle straightens out


Possible dirty throttle plate disrupting minimum airflow. Remove air intake hose coming from air filter housing assembly to throttle bore and inspect throttle plate for being dirty/coked up. Throttle plate and bore should look clean/silver. If black/brown, use intake cleaner and old toothbrush to remove gum/varnish deposits and retest

Feb 29, 2016 | Cars & Trucks

1 Answer

Driver side door ajar light comes on 2006 chryler 300 c


alarm will obviously sound because the anti theft device thinks door is open...maybe it doesn't think ...it mis detects
check the door light switch and how it is affected by closing opening of door. look at what happens at the contact point.
It may be something mechanical, or something electronic/electrical
empirical testing should reveal the answer

Jul 07, 2015 | 2006 Chrysler 300 C

1 Answer

Won't go in gear


same problem i had before it didnt shift into gear did it get stuck when trying to put in park? well if so its your shift cable you can only get that at the dealer and it will cost you about $100.00 with out the labor of course. i have a chryler 300 ( 2005 ) also if you go on utube you can see how to do it yourself not difficult .

Sep 11, 2013 | 2005 Chrysler 300

1 Answer

Loosing antifreeze in a 1999 chryler 300 m


Is the antifreeze leaking on the ground or just disappearing, need more information.

Mar 26, 2013 | Cars & Trucks

1 Answer

My chryler 300 is stack in park it dont shif


Check shifting linkage going to transmission, May be bent of ***** out.

May 02, 2012 | 2006 Chrysler 300

2 Answers

How do I program keyless entry in a chrysler 300 touring?


i think you have to have the shops computer for them i would take it to nearest dealer it normaly cost $10.00

Nov 21, 2010 | 2005 Chrysler 300

1 Answer

Can the thermostat for a 2000 chryler 300m be put in backwards?


It can be put in backwards, however it will not function properly.

Nov 12, 2009 | 2004 Chrysler 300

1 Answer

My chryler 300 2007 will not shift at all ..


i dont know much about your car but, is there any chance that car has a safety mechanism that wont let you put it in gear because it feels that its not safe to drive on the road? one of my cars did that when i had a brake light out. i was stuck in the drive through!!

Oct 08, 2009 | 2005 Chrysler 300

1 Answer

2005 chryler 300 eng hood will not open -cable is


You can access the hood release from the front of the car under and behind the front bumper.

Jul 19, 2009 | 2005 Chrysler 300

Not finding what you are looking for?
2005 Chrysler 300 Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...