Question about 2009 Nissan Versa
Most cabin air filters are located inside the dash. Only way to access this area is through the glove box. Open glove box, remove/open the tabs and the glove box cover will drop down to gain access. Be sure to remove all items from the box or they will just dump out on floor. Behind the glove box using a flashlight you will see the filter, remove, replacement is reverse of accessing.
Hope this helps!
Posted on May 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cabin air filter
Purchase a Purolator Cabin Filter for your Impala. It comes with complete instructions. The filter is located below the windshield, passenger side. The black plastic cover must be removed to access the filter. You simply raise the hood and remove 3 plastic clips, and the washer hose from it's holders. This will allow you to remove the plastic cover over the filter
Please rate this
Posted on Nov 22, 2008
cabin air filter is in the airbox behind the glove compartment,
unclip the glovebox, look behind it for a small access door, undo the latches, and voila! theres your cabin air filter! (if equipped, some model equinoxes dont have it!)
Posted on Apr 01, 2009
We had to remove the glove box first then on the centre consol there is a small removal plate, remove this and locate the filters. There are two .
Posted on Apr 23, 2009
1. Open glove box
2. Unhook elastic retainer on right side
3. Locate the two "stop tabs", one on the upper left and the other on the right side. Push both to the left to clear their stops and the glove box will swing down, allowing access to the filter cover.
Posted on May 06, 2009
I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.
Posted on Dec 27, 2009
Tips for a great answer:
Feb 05, 2016 | 2006 Chevrolet Chevrolet Malibu
Jan 20, 2016 | Cars & Trucks
May 02, 2014 | 2010 Hyundai Santa Fe
Feb 14, 2014 | 2009 Pontiac G8
May 03, 2011 | Suzuki Grand Vitara Cars & Trucks
Feb 23, 2010 | 2004 Nissan Murano
Dec 06, 2009 | 2003 Chevrolet Silverado 2500HD
Apr 03, 2009 | 2005 Honda Odyssey
Nov 26, 2008 | 2006 Honda Accord
310 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: