Question about 2007 Toyota Tundra
FRT OR REAR.. IF DISC. REMOVE CALIPER BOLTS. EMOVE CALIPER REEPLACE PADS. MAKE SURE YOU USE BRAKE QUITE BEFORE INSTALLING PADS.. PREVENTS PAD NOISE
Posted on May 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
use a 14mm wrench or socket to remove the caliper bolts/slides. remove caliper. note how old pads came off, match the new pads with same location of old pads ( check for hardware or indicator location). press the caliper piston in . the correct way is to use a caliper press, apply a little pressure to piston, open bleeder screw, press piston all the way in, tighten bleeder. (or grab a 'c' clamp and slowly push the piston in. i would recommend having the rotors machined to for proper wear and to eliminate vibration. for this remove 2 17mm bolts holding caliper bracket on and rotor will slide off.
Posted on Apr 30, 2010
I have a 2006 Sequoia which should have the similar if not the exact same brake system. Changing the pad is very easy and straight forward. No special wrenth was involved. Easier than sedans since no worry to damage the brake fluid pipe.
Posted on Jul 11, 2009
Tips for a great answer:
Jul 25, 2014 | 2007 Toyota Tundra
Jul 12, 2014 | 2004 Toyota Tundra
Nov 28, 2013 | 2007 Toyota Tundra
Oct 15, 2012 | Cars & Trucks
Sep 10, 2012 | 2007 Toyota Tundra
Feb 20, 2012 | 2003 Toyota Tundra
Jan 07, 2010 | 2007 Honda Ridgeline
Jun 06, 2009 | 2002 Toyota Tundra
Apr 28, 2009 | 2001 Toyota Sienna
Sep 19, 2008 | 2000 Toyota Tundra
891 people viewed this question
Usually answered in minutes!