Question about 1995 Chevrolet Corsica
How do i install serpentine belt on a 3.1 Chevy Corsica. do i have to remove the alternator to install new belt.
You have to use a floor jack and support the motor and remove the upper passenger side motor mount. Trust me i have one and learned the hard way
Posted on Oct 25, 2011
No just slide it inward toward the block on the adjusting rail,after loosening the bolts.
Posted on May 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 03, 2015 | Nissan Cars & Trucks
Dec 04, 2011 | 2001 Chevrolet Malibu
May 26, 2011 | 1994 Chevrolet Corsica
Mar 02, 2011 | Chevrolet Corsica Cars & Trucks
Oct 29, 2010 | 1991 Chevrolet Corsica
Turn off the engine and place the transmission in park (automatic) or first gear (manual). Engage the parking brake and open the hood. Disconnect the negative cable from the battery terminal using the battery terminal wrench.
Remove the serpentine belt by inserting the end of the serpentine belt tool into the square hole on the belt tensioner and rotating the removal tool clockwise. Unplug the alternator's electrical connector. Remove the bolt holding the positive voltage cable to the alternator using a 3/8-inch ratchet and a metric socket. Remove the positive voltage cable from the alternator.
Remove the alternator bracket bolts using a metric socket connected to a 3/8-inch ratchet. Remove the alternator from the car. Place the new alternator in the mounting brackets and reinstall the mounting bolts using a 3/8-inch ratchet connected to a metric socket.
Reinstall the positive voltage cable on the alternator and tighten the retaining nut using a 3/8-inch ratchet and a metric socket. Plug in the alternator's electrical connector. Compress the serpentine belt tensioner using the serpentine belt tool. Reinstall the serpentine belt according to the belt-routing diagram located under the hood.
Reconnect the negative cable to the battery using the battery terminal wrench. Start the engine and verify that the alternator works.
Oct 29, 2010 | 2001 Pontiac Sunfire
Jan 11, 2010 | 1991 Chevrolet Corsica
Jan 01, 2010 | 2004 Chevrolet Silverado 2500HD
Dec 16, 2009 | 2002 Chevrolet S-10
Dec 15, 2009 | 1989 Chevrolet Corsica
181 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: