Question about 2004 Chevrolet TrailBlazer

2 Answers

How do i remove front brake pads from 2004 chevy

How do i remove front brake pads from 2004 chevy trailblazer

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,170 Answers

Please refer this videos, it will guide you perfectly : http://www.ehow.com/videos-on_163_replace-front-brake-pads.html

Posted on May 31, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,121 Answers

Remove one caliper bolt, and loosen the other one. You can now hinge the whole caliper up or down depending on which bolt you left in (loose). While the caliper is out of the way, the pads will be sitting in the caliper bracket, ready for you to take out with two fingers.

Posted on May 11, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What tools do i need to change brake pads on 2005 yukon xl


Jack, wheel wrench, socket set, large screw driver, pair of pliers or grips. Lithium grease for the pins. Watch all of these videos. .spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}




g-img{display:block}._WCg{display:block;border:0;position:relative} Search Results

    How To Install Replace Front Brake Pads 2000-06 Chevy ...

    9k=? 4:46 https://www.youtube.com/watch?v=nPohZtD8zlA May 27, 2014 - Uploaded by 1A Auto Parts http://www.1aauto.com/brake-pads/i/1abps00080 1A Auto shows you how to ... Front Brake Pads 2000-06 ...

    HOW TO INSTALL REPLACE GMC YUKON DENALI ...

    z? 14:10 https://www.youtube.com/watch?v=um7dt_yvZ1s Sep 20, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon Denali. Changing these parts ...

    How to REPLACE INSTALL BRAKES and ROTORS GMC ...

    2q==? 11:32 https://www.youtube.com/watch?v=UWqows3P4DE Feb 11, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon. Changing these parts ... Would ...

    GMC Denali Brake Pads Removal and Installation - YouTube

    z? 3:45 https://www.youtube.com/watch?v=uEKs8nphVxU Oct 24, 2012 - Uploaded by AnotherLookFilms Remove and Install rear brake pads on your 2006 GMC Denali XL. ... 9-21-13 2007 GMC Yukon rear brakes ...

    GMC Yukon Denali Front Disc Brake Pad Replacement ...

    2q==? 8:21 https://www.youtube.com/watch?v=w_gn_l5lYkw Jun 20, 2013 - Uploaded by AMS Automotive Watch the proper procedure for replacing front disc brake pads. Featured vehicle: 2007 GMC Yukon Denali ...





Jan 22, 2016 | Cars & Trucks

1 Answer

Front brakes locking up on 2004 chevy trailblazer


Could be a few things, but most likely seizing calipers. Could also be restricted flex hoses, or incorrectly installed brake pads

Dec 04, 2013 | 1999 Chevrolet Tahoe

1 Answer

I have a 2004 Chevy Malibu. I have replaced the front brake pads, calipers and rotor and bled the brakes but they are still mushy. I heard that they have to be gravity bled. My question is: Do the brakes...


no,to gravity beed just open bleeder remove master cylinder cap & dont let it go empty.
if you only opened the front you may just need to bleed the front.some times pumping up
brakes before bleeding will help start the gravity bleed.

good luck

Jun 22, 2011 | 2004 Chevrolet Malibu

1 Answer

How do you replace lug nut bolts on a 2004 chevy trailblazer? Two lug bolts have broken off. Do I have to remove disk brakes and how hard is this?


its just esayer to take it to a tire shop the charge like 10 bucks a stud

aslo you have to have a press to press them on o ther thtan that theyr easy to replace

May 14, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

2004 Chevy Trailblazer.....Do I need to keep on the brake dust shield?


They do come in handy for rocks can get inbetween the caliper and the rotors eating away your brake pads if removed

Apr 30, 2010 | 2004 Chevrolet TrailBlazer

3 Answers

How do i change the pads and rotors on my 2002 trailblazer ls?



If you Need Pics/ Illistrations Email @rejakwilson@aol.com


Brake Pads Replacement - Front

Removal Procedure

Caution: Refer to Brake Dust Caution in Service Precautions.

  1. Inspect the brake fluid level in the brake master cylinder reservoir.
  2. If the brake fluid is midway between the maximum-full point and the minimum allowable level, no brake fluid needs to be removed from the reservoir before proceeding.
  3. If the brake fluid level is higher than midway between the maximum-full point and the minimum allowable level, remove the brake fluid with appropriate tool to the midway point before proceeding.
  4. Raise the vehicle. Refer to Vehicle Lifting.
  5. Remove the tire and wheel assembly.

  1. Compress the front brake caliper piston.
6.1. Install a large C-clamp over the top of the brake caliper housing and against the back of the outboard brake pad. 6.2. Slowly tighten the C-clamp until the piston pushes into the brake caliper enough to slide the brake caliper off the rotor. 6.3. Remove the C-clamp from the brake caliper.
  1. Remove the lower mounting bolt from the slide pin.
  2. Rotate the brake caliper upward until it stops.
  3. Remove the outboard brake pad.
  4. Remove the inboard brake pad.
  5. Remove the brake pad retaining clips from the brake caliper mounting bracket.
  6. Remove the brake pad retaining clip from the brake caliper.
  7. Remove all foreign material from the brake caliper using denatured alcohol.
Installation Procedure

Important: When installing new brake pads, DO NOT reuse the old retaining clips for the brake pad. Use only NEW brake pad retaining clips.


  1. Install the brake pad retaining clips to the brake caliper mounting bracket.
  2. Install the brake pad retaining clip to the brake caliper.
  3. Ensure that the brake pad retaining clip in the brake caliper is properly seated.
  4. Install the inboard brake pad.
  5. Install the outboard brake pad.
  6. Rotate the brake caliper down into position.


Notice: Refer to Fastener Notice in Service Precautions.

  1. Install the lower brake caliper mounting bolt.
    • Tighten the brake caliper mounting bolt to 51 Nm (38 ft. lbs.) .
  1. Install the tire and wheel assembly.
  2. Lower the vehicle. Refer to Vehicle Lifting.
  3. Fill the brake master cylinder reservoir. Caution: Refer to Firm Brake Pedal Caution in Service Precautions.
  4. Pump the brake pedal slowly and firmly to seat the brake pads.
  5. Burnish the new brake pads.



blnk_spc.gif

Jul 24, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

My bottom brake lights dont work 2004 chevy trailbalzer


The recall on those was the boards the bulbs mount too. Remove the lenses and then the boards. See if your bulbs are good and check for fire at the light blue, or brown and white wire. Modle dependant. Good Luck

May 22, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

How do you change the front brake pads on 2004 chevy 1500 2wd?


you may have to pry on them just a but they should just pop lose

Jan 11, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Front brakes


Antilock brake systems don't like fluid pushed back through the system.

You should follow good standard practice, by blocking and ensuring the car is stable and safe.

When the wheel is removed, clamp off the flexible brake fluid line. When you push he caliper back to change the pads, do it with the bleed screw open and catch the fluid that comes out. When the caliper is fully depressed, close the bleed screw up. Change the pads, ensure you put anti-squeel on the outter surfaces. Inspect the clips, ensure they are all seated properly.

Check the runout on the rotor, make sure it's not warped. Get them turned or replace them as necessary.

When done, reinstall everything and remove the clamp.

Start the truck, pump the brakes a few times to get fluid back to the front calipers. Inspect the fluid level in the resivoiour to ensure enough fluid is there.

Do some safe test brakes to ensure all is ok.

Dec 13, 2008 | 2005 Chevrolet TrailBlazer

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...