Question about Mitsubishi Passenger

2 Answers

Pajero valve clearance 4d56 turbo and why engine oil pop out from dip stick while enging runing?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 1,675 Answers

Hi the clearance on these will be 0.25 hot ( just run ) and the reason why you have oil coming out from dip stick is either you have too much oil in and need to drain some, or somewhere on the vacuum system you might have a blockage which in turn is casing a pressure build up and is forcing the oil out...hope this helps

Posted on May 31, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with oil coming out the dipstick on my old 4d56.

could be worn rings causing what is known as "blowby" or "blow back" ie. compression from the combustion chamber passing the piston rings and entering the block of the engine.

your engine is probably backpressurings.
usually calls for an overhaul

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need diagram showing an isuzu wizard 1998 deisel 3 litter timing marks or degrees and valve clearance


I will talk about Isuzu Wizard eng.4JX1 turbo 3000/ Diesel, It takes time to Start and after get Started comes a White Smoke from the exhaust and also the is a miss firing. I can also see there is Eng.Oil coming from the throught Body direct to the Turbo but not so much but is visible when the engine is tuning and the car this not have power now. What can be the problem, what must be fixed???

Apr 08, 2017 | Isuzu Cars & Trucks

2 Answers

What do I need to do to remove the alternator from the motor bay of the 4D56 turbo diesel engine?


The right size sockets is about it. You will need to release the tension of the belt at the idler arm, disconnect your battery first, remove a couple of bolts and replace.

Jan 09, 2016 | 1994 Mitsubishi Pajero

1 Answer

I noted an oil leak from the compressor side of my turbocharger.Also the shaft has a slight side to side play.Is this normal? The turbo is fitted on a Mitsubishi Pajero,engine model 4d56


The play in the turbo is why you have the leak with out rebuild shop tools all you can do is change the turbo (if a lot of oil gets into inlet
system engine can run away and will not stop ((English mechanics
call this drinking its own blood)))

Oct 24, 2010 | Mitsubishi Outlander Cars & Trucks

5 Answers

4d56 engine high fuel consumption


4d56 is a diesel engine, fuel, oil, air filter change definitely, regular oil change, check tyre pressure, etc all basic things u can do yourself, after all its no 40+ MPG modern diesel engine its been around for years and years and being used in courier van, pajero and delica, i have a Delica with 4D56 turbo and its loves drinking diesel like no tomorrow, run it on veggie oil like i do you wont worry too much about your fuel consumption.

Jan 06, 2010 | 1987 Mitsubishi Passenger

1 Answer

Engine oil get less every two weeks in my pajero 4m40


Diesels do lose a little oil out the blow-by tube. If the engine temp. is higher then normal then you will lose more then normal amounts. If you are not leaking it then you are burning it, Possibly worn rings, head-gasket, or oil leak inside turbo. 68 MPH and higher doesn't sound unusual, is the engine still stock?

Jun 03, 2009 | 1995 Mitsubishi Montero

1 Answer

Timing marks for 86 diesel pajero


I can send you the timing marks and procedures. Email me: technopro@windowslive.com
Cheers.
Give me the engine number...4D55 or 4D56 Turbo/Non turbo.
Cheers

Apr 20, 2009 | Mitsubishi Passenger Cars & Trucks

6 Answers

1993 mitsubishi pajero exceed-intercooler turbo 2800 diesel engine 4m40


Hi, I have a Pajero 2800 Turbo 1995 Auto. It has developed a bad oil leak somewhere around the front right hand side (from the front) where there seems to be oil spraying over the pipes, etc. Can't see it happening with the engine running and have cleaned the engine off but still can't see where it comes from. It has emptied the sump! Any ideas?
Cheers,
Rob.

Jul 10, 2008 | 1995 Mitsubishi Montero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...