Question about 1991 Acura Integra Hatchback

2 Answers

Need to set eletronic distibutor on 1991 acura intega but need to know where the alingment marks are so i can use timing light

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Acura Expert
  • 268 Answers

Just center the top most bolt on the distributor and you'll be fine. I like mine a little counter-clockwise from center though for a bit of advanced timing.

Posted on Jun 05, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

The timing marks for ignition timing are on your crank pully. there are three. the middle one is stock setting and gets lined up with the line on your timing cover.

Posted on Jul 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1992 automatic Acura intega won't switch into gears when driving


Check Transmission fluid level. I'll bet it is low. Otherwise,
Bad linkage bushings or links. Last time Transmission serviced?

Mar 08, 2015 | 1992 Acura Integra Hatchback

1 Answer

Where do i find my tranmission bands at in my 1992 acura intega


the bands are the straps that go around the planetary gears in the transmission. they look like steel straps

Mar 07, 2015 | Acura Integra Cars & Trucks

1 Answer

How do i replace the timing after changing the distibutor?


According to nissan owners club online, you only have to hook up the timing light and adjust it. I think it is set at 15 degrees but check the sticker on the hood.

Jul 26, 2012 | 2000 Nissan Quest

1 Answer

Diagram 91 acura integra


the rocker arms should be marked with "I" for intake and "E" for exhaust. may need to clean with alcohol to see the markings.

Jun 12, 2012 | 1991 Acura Integra Hatchback

1 Answer

How set distibutor rotor and place the timing mark on blazer 2000


If the distributor was removed and the rotor position was not marked.You will need to turn the crankshaft until cylinder 1 1st cylinder on drivers is at tdc.The when setting the distibutor back in make sure the rototr is lined up with cylinder 1 on the cap. If it keeps throwing out a ckp correlation code but seems to run ok you will need to turn the distributor while its in the vehicle just a little one way or the other.Usually if its off the ckp correlation code will turn the engine light on immediately.I usually leave the the distributor snug but loose enough to turn until that code stops coming up.Once you get that code to quit coming up tightened the distributor down completely. There should be a timing mark on the harmonic balancer.Mark it with white crayon or chalk for visibilty yellow works as well.You need that mark to line up with the marks on the timing chain cover.

Jul 23, 2010 | 2000 Chevrolet Blazer

1 Answer

Can't set timing or get timing marks for 1991 acura legend


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1991/make/acura/model/legend/1991_acura_legend_timing_belt_diagram_marks.htm

Mar 23, 2010 | 1991 Acura Legend

1 Answer

Where is the marks of timing of the a acura legend 1991


either front pulley or the flywheel ,just look and you will find ,could be just a hole through bell housing that has a 8mm rod (special product tool) that pushes into the flywheel .

Dec 27, 2009 | 1991 Acura Legend

1 Answer

1995 acura how do u set the vals and timming


First you will need a service manual or information for this vehicle for the valve lash setting. The procedure is usually removing the valve cover( You will need a new valve cover gasket) putting the # 1 cylinder on top dead center and using wrench, screw driver or allen key,and a feeler gauge. You will need to follow the firing order when adjusting the valves. You will need a timing light to set the timing and also the timing spec. This usually involves warming engine to normal operating temp. clean harmonic balancer and mark the timing mark with some white paint loosen the the distributor hold down bolt hook up timing light and turn distributor until the timing mark on the balancer lines up with the timing mark on the timing cover then tighten the holding bolt back down. Also the timing advance has to be disabled when setting the timing and enabled when you are done. The valves should be set first then set the timing. A Haynes manual available at your local auto parts store should contain pictures and information to help you do this.

Nov 21, 2009 | 1998 Acura TL

1 Answer

I just rebuilt this motor. Plug wires and timing chain is correct but the distibutor is not set quite right. can you help


Remove Number One Plug, Disconnect Coil Wire, Or Coil Pack, Un-Plug Coil Pack. Spin Engine Until You Feel It Blow Your Finger Hard! Watch Out That You Don't Get Confused With The Exhaust Stroke. Make Sure Timing On Balancer Is On 0TDC, Or Put Mark Dead On What Ever Timing Spec Is. Install Dist. With Rotor Pointed Toward Number One On Cap. You're Done.

May 02, 2009 | 1991 Chevrolet Camaro

1 Answer

Timing belt


Here you go...
1ea6e2f.png bbe1997.png

Aug 17, 2008 | 1991 Dodge Spirit

Not finding what you are looking for?
1991 Acura Integra Hatchback Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...