Question about Mitsubishi Lancer

1 Answer

CLICKING NOISE BEHIND GLOVEBOX 2000 MITSUBISHI VERADA

I HAVE A 2000 MITSUBISHI VERADA, THAT HAS A CLICKING NOISE FROM BEHIND THE GLOVEBOX WHEN THE KEY IS TURNED TO THE ACCESSORIES POSITION.THEN AFTER ABOUT 20SECONDS IT STOPS. THERE ARE NO WARNING LIGHTS SHOWING UP ON THE DASH AND THE CAR DRIVES FINE. ANY HELP WILL BE APPRECIATED......THANKS

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It's a little motor that i believe opens and shuts a damper to do with the climate control, a quick fix is just adjusting the cabin temp up a few notches.

Posted on Aug 17, 2010

  • Anonymous May 01, 2015

    Thank u - I just had that problem and thought of the $'s to fix my 2003 Verada and bingo it worked

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac makes clicking sound when switched to max


You just go to the link I attached I'm sure you will get the solution of your problem
KIA Sorento 4cyl 2 4L 2011 OEM Factory SHOP Service repair manual FSM

Jul 11, 2016 | 2011 Kia Sorento 2.5

1 Answer

What could this noise be


I am assuming the noise happens with the key switch on or the engine running.
It could be a relay or one of the blend doors for the HVAC. You'll have to get behind the glovebox to find the source.

Apr 23, 2013 | 1998 Cadillac DeVille

1 Answer

Ticking behind glovebox


Does it sound like the noise the turn signal makes? Does the noise change if you change the speed of the blower motor? Do all the function of the heater work (defrost, vent, floor, recirculate, fresh air, hot, cold)?

Nov 29, 2012 | 2003 Pontiac Sunfire

1 Answer

Noise behind glovebox


Remove the glovebox liner end check it out, There might be a mouse in the house,

Nov 11, 2012 | Nissan Cars & Trucks

1 Answer

Cant find computer on my 2000 galant 2.4l motor


Hi there,

On earlier models, the ECM (also known as PCM & ECU) was located above the passenger side 'kick panel', hidden behind the glovebox.

However, on later models, Mitsubishi mounted the computer in behind the Centre Console (below and behind the ashtray area). You'll need to remove both centre console side panels.

The one you want, has a part number starting with: MR *****


wolfman304_52.gif


Note: NEVER replace the PCM, unless your diagnostic codes codes confirm the PCM is faulty. Have your diagnostic codes read before disconnecting.


Cheers,



"Please take a moment to rate this solution with a 'testimonial' and/or 'thumbs up', as this will keep my status active and allow me to continue offering technical support. Thank you."




Jul 15, 2011 | 2000 Mitsubishi Galant

1 Answer

Where do you find the fuel filter on a verada kj 2000 v6


check on the fire wall they are usually mounted there

Jan 06, 2011 | 2000 Mitsubishi Diamante

1 Answer

Oxygen Sensor Mitsubishi Verada 2001 Wagon


the oxygen sensor is mounted on the top of the exhaust directly behind the 2nd exhaust inlet, basicaqlly where the 2 pipes meet into one, is screwed in from the top of the pipe. possable that the flexable joints of this pipe may have been damaged and exhaust can leak form these joints

Jun 23, 2009 | 2001 Mitsubishi Montero

1 Answer

Problem with annoying clicking noise


I dont know if it works the same, but I drive a 2006 Mitsu Lancer Ralliart. When you push the recirc air button, a little motor closes a little gate that blocks outside air and pulls the air from the interior instead. The blower motor is located behind the glovebox. It is secured by a couple screws.
I guess its possible that a foreign object such as a leaf or something is touching the blower motor and causing the noise.

Mar 03, 2009 | 1998 Mitsubishi Galant

1 Answer

Mitsubishi pajero, 1996, alternator died, had it reco'd, now car


The starter is suspect here and is easily bridged (NOT in gear please ! ) The clicking behind the glovebox is normal . This happens during cranking but you don't hear it because of engine turning over. The engine reset you may be thinking of generally covers fuel and central locking in saloon cars mostly , but not the srarter circuit.

Dec 30, 2008 | 1987 Mitsubishi Passenger

1 Answer

Mitsubishi Verada, every now and then my car will make a clicking noise behind the glove box, the check engine warning light comes on and then the car shuts off. I try to restart the car but evertime it...


I think that that is where the fuel shutoff emergency reset valve is located on your particular vehicle....try removing the glovebox and checking that the valve is there and reset it.If it keeps doing the same thing replace it. there are only 2 wires connected to it.

Oct 29, 2008 | Mitsubishi Expo Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...