Question about 2003 Nissan Altima

1 Answer

All lights turn on but the turn signal flasher or emergency flasher do not blink.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

Your problem very well may be the emergency flasher switch.
Try to play with it , off and on , if it start working that means switch is bad.

Posted on May 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 chrysler lebaron turn signal turns on but won't blink


The turn signal flasher or a circuit component is defective

Oct 28, 2016 | 1993 Chrysler Lebaron

1 Answer

1976 Ford F 100 turn signals don't work


If you put a test light on the flasher, will it continue to flash ?
And do the emergency flashers work correctly ?

Sep 19, 2015 | Ford Cars & Trucks

1 Answer

Turn signals light, but do not blink Where is the turn signal flasher located for a 1991 Olds Cutlass Ciera


There should be on on the fuse box under the dash, and another behind the radio. The one on the fuse box usually handles the emergency flashers.
You might want to use the emergency flashers to make sure all of the bulbs are working.

Aug 27, 2015 | Cars & Trucks

1 Answer

Signal light flasher location


The turn signal flasher and the emergency flasher on most cars are located in the same area. Turn on the emergency flasher and find the sound......the turn signal flasher should be in the same area.

Sep 09, 2014 | 1998 Buick Century

1 Answer

Turn signal flasher relay location in


Normally, yes.The flasher should be in the fusebox - turn on the signal and get your ear close to the fusebox - you should hear the flasher clicking. There should be 2 flashers there - 1 for the turn sigs and the other for the hazard/emergency flashers.

Jan 25, 2014 | GMC Sierra 1500 Cars & Trucks

1 Answer

Turn Signals quit working


Sounds like the turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they use a different flasher.

May 05, 2010 | 2000 Audi TT

3 Answers

97 olds 88, left turn signal not blinking.


possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

Sep 12, 2009 | 1997 Oldsmobile 88

3 Answers

Turning signals dont blink


Problem is the Turn Signal "FLASHER" unit, 1.Turn on Emergency FLASHERS 2. Go under Dash while they are on Listen -for Clicking sound then feel for it 3. Should Be a Silver Round Unit About as Big IN ROUND as Half dollar coin 4. ok now Look Around for the SAME EXACT Thing Clipped onto Something Under dash At Driver side Usually Between Steering wheel and Center HUMP in Floor, 5. once you find it Take OUT the first One you Found Emergency FLASHER) and 6. Put it In Place of Turn Signal Flasher, 7. Turn off Emergency Flashers- Turn Key in "ON" Position but don't start then Try Turn Signals. Yaaaa !!!! they work ?? LoL hopefully this Does the trick, if they work Buy new one and Replace Always Use NEW For TURN Signals as they are used Much More than Emergency Flashers. Hope this is Good Instructions For you and Helps you Solve The Problem, Please DONT Forget to RATE ME Thank you Rejakwilson@aol.com

Jan 18, 2009 | 1986 Oldsmobile Cutlass Supreme

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Nissan Altima Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...