Question about 2004 Volkswagen Jetta

Open Question

I have trouble codes p0343 n p0352, so i can not not go passed 3k rpms. i have already changed my the cam pos sensor twice so i dont think the postion sensor is bad

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: volkswagonbeetle

check your idle control valve it is on the sid eof the intake.

Posted on Oct 06, 2008

Ad
  • 75 Answers

SOURCE: Car dies after ten minutes or so then restarts. I

have you tried the crank trigger that will also do that same prob

Posted on Aug 18, 2009

  • 14036 Answers

SOURCE: hi,i have a 2000 beetle

CODE P1137 LONG TERM FUEL TRIM IDLING BANK 1 SYSTEM TOO RICH.POSSIBLE CAUSES,EGR VALVE STICKING, EVAP VAPOR RECOVERY SYSTEM FAILED, AIR LEAKS LOCATED AFTER THE MAF SENSOR MOUNTING LOCATION,AIR INTAKE SYSTEM LEAKING VACUUM HOSES LEAKING OR DAMAGED,FUEL PRESSURE REGULATOR IS LEAKING OR DAMAGED,EXCESSIVE FUEL PRESSURE LEAKING OR CONTAMINATED FUEL INJECTORS.

Posted on Mar 08, 2011

  • 3 Answers

SOURCE: P2103 throttle actuator control motor

Give me some more information about this problem. May be i can help.

Posted on Jul 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 ford ranger wont pass 3k rpm


if you hare having problems going passed 3k then there is a sensor fault could be a cam or weak crank sensor it would be best to have the codes read from the ecu, if you have had any work done to the engine bay i would check around the area that has been worked on. might of pulled a wire or a plug to a sensor etc.

Jun 27, 2017 | Ford Cars & Trucks

1 Answer

Won't go above 50 mph, and transmission has trouble shifting


probably a faulty transmission control module BUT run the fault codes to find out exactly

Mar 03, 2016 | Cars & Trucks

1 Answer

2005 Dodge Ram 1500 4.7 Engine. Starts fine, Idles fine, but when engine shifts into high gear and RPM lowers engine runs really rough under load


Have you checked for a broken valve spring. Repaired a dodge engine with the same running issue as you have described and it was a broken intake valve spring.

Feb 22, 2015 | 2005 Dodge Ram 1500

1 Answer

Dodge avenger es 1996 p0352


P0300 code is random misfire, P0352 code is ignition coil be wire malfunction, P0352 that the main problem If you are equipt with COP (coil on Plug) one of the are disconnected or at the harness to the ignition coil.

Apr 11, 2012 | 1996 Dodge Avenger

1 Answer

99 Jeep Cherokee Sport, 4.0L -won't start


you need to have it connected to an OBD2 machine and watch if you are missing the cam sensor showing RPMs
or if your missing crank sensors RPMs,
it could be a wiring problem or computer if your seeing the RPMs from both sensors,and the last thing i would check is hooking up a fuel gauge to the reed valve and watch what fuel pressure you have while cranking,if the cam sensor is the culprit it will turn the fuel off after the cranking.

Jan 11, 2010 | 1999 Jeep Cherokee

2 Answers

Ford 4.0 v6 misfiring


yes an o2 sensor can cause the mixture to go lean or rich. But you have another culprit also a knock sensor can cause this also. for the miss this is more of what the knock sensor would control. Hope this helps you

Jan 17, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
2004 Volkswagen Jetta Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...