Question about 1992 Oldsmobile Cutlass Ciera

1 Answer

Removing spark plug wires on 92 cutlass cierra s

The 3 wires on the front of the engine run through a plastic chase wedged between the valve cover and an engine mount. How do I remove the chase and/or wires from it?
Thanks!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Since it is a 1882 the plastic is old and brittle so expect it to break in pieces. Just pry the seams away from one another after the engine is hot. That may keep it from rteaking

Posted on May 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I need to remove the tensioner to remove the alternator on a '92 cutlass cierra? If so what size is the bolt that attaches it?


No, you just need to loosen the belt and take it off the alternator. Then the two bolts that mount it and unclip the plug and unbolt the other wire.

Aug 07, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

How to change valve cover gasket and thermostat on 1992 ES300


the thermostat its located in water out hose near to a/c compressor, to change valve cover, front of engine remove the plastic cover with lexus logo using hex 5mm key 2 bolts , unplug 3 spark plug wires ,loose all 10mm bolts on valve cover , to rear engine valve cover remove before the manifold intake and all components , air filter duct , etc.

Aug 06, 2010 | 1992 Lexus Es 300

2 Answers

Where are the spark plugs located in a 03 hyundai santa fe??


To locate and change the the (4) spark plugs on a 2003 Hyundai 2.4L 4 cylinder engine:
Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.

Nov 21, 2009 | 2003 Hyundai Santa Fe

1 Answer

I need to replace spark plugs and wires on my santa fe v-6. Do i need to remove the intake manifold?


There may be an engine cover over the valve covers that is a big piece of plastic that may say Hyundai, or Santa Fe,

I believe its three or four 10mm retaining nuts that hold it on, take that engine cover off, and there should be 3 wires in the top of each valve cover, those big wires are the spark plug wires, and they actually connect to the spark plug which is down inside the cylinder.
To remove, you will need a 3/8 drive ratchet, a long extension, I would say 6-12 inches, long enough, but not too long, and a 5/8" spark plug socket.
Take one of the spark plug wires out, and put your long extension with the spark plug socket on it down into the hole that the big wire came out of and you should find a spark plug at the end of the tunnel.

Oct 04, 2009 | 2004 Hyundai Santa Fe

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

1 Answer

How do i install a ignition model into a 92 Cutlass Ciera


On v-6 it is in the front, tight working area. unplug wiring, remove spark plug wires(mark them for proper order for assembly) unbolt from engine coil packs and remove module, install module(with a little diealetric) and reverse for install.

May 22, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

I can't find the spark plugs in my 2005 sonata


To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine:
Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.
Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place.
To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place.
Repeat same procedures for spark plugs number (3) and (4).
Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold.


please rate!

Mar 18, 2009 | 2006 Hyundai Sonata

1 Answer

Partial hidden screws on valve cover 1994 Park Avenue 3.8L


the are tight but they just slide striaght up if you bust them they are real cheap at auto zone

Feb 28, 2009 | 1994 Buick Park Avenue

1 Answer

Replacing the plug wires


You may have a cover over the engine that has 3.3 on it; if so twist the lower half of the oil fill tub and remove it and pick up cover to exspose top of motor. this cover is a big plastic cover.

Nov 20, 2008 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...