Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Does a 2000 f 250 have a connection for fog lights in the wiring harness if it did not come with fog lights

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

There may be a connection in the harness or a place to connect the cabling, but what you'll find out is that the light switch is different for the trucks that have fog lights from the factory. They have a pull-to-activate function for the fog lights and an indicator led on the switch that shows the fogs are illuminated.
I would suggest purchasing an aftermarket fog lamp kit with the entire package...switch, wires, relay etc..cheaper in the long run... not too hard to wire on these either...the toughest part is feeding a wire thru the firewall... but even that's not too difficult.
Hope this helps...

Posted on May 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do i find the attachment point to connect harness for fog lamps on a 2004 jeep wj


If it didn't have fog lights the vehicle may not have the wiring harness.

Sep 01, 2016 | 2004 Jeep Grand Cherokee

1 Answer

I have a 97 escort that is not prewired for fog lights and i have noticed a wite harness for power mirrors that is not being used Can i use this to power my fog lights and connect a switch?


i wired my front fog lights on my escort van using the rear fog lamp switch u change the actual switch to the double switch(front an rear fog switch) if you buy this off a scrap car you cut the wiring and connect rear fog plug to bottom of switch and connect front fog wiring to the top plug.

Apr 07, 2014 | Cars & Trucks

1 Answer

Location of foglight wiring harness


The Easiest Way is to Get the Wiring Harness Diagram with the Colors and Verify that you plugged the Fog Lights into the Correct Harness. I once had a FORD that had a Fuse BOX that had a FOG LIGHT and No Power to that Fuse.

Make sure you test the Fuse at the Box and then Trace the wires and if the Switch was wired at the Factory, you should be all set

Apr 09, 2013 | 2006 Buick LaCrosse CXL

1 Answer

I30 fog lights


No it will not have the connectors to the lights, but it will have a connector where the fog light sub harness would connect. You should be able to buy the entire kit at the dealer, it will come with fitting instructions and wiring diagrams.

Mar 09, 2012 | 2010 Hyundai i30 1.4

1 Answer

How do i find the wire that is blowing the fuse that goes to the dash, park, fog lights. I have taken the dash apart and can't find the problem. What is the problem


If you do have fog lights, thats where to start. Any outside wiring. follow the wiring back from the fog lights checking at any clamps or tight turns. If they are 2 wire harness to each side you need to check those harness at each clamp. If you do not have fog lights, check under the hod at the fuse/ relay box. You are looking for a cut in the main harness. Have you had any belt problems? Alternator belt fraying? Belts can fray and parts will whip the wiring harness very hard. Check these places for your short.

Dec 10, 2010 | 1994 Dodge Intrepid

1 Answer

Wiring for Bosch Hologen Fog Lights? Wiring harness has 5 wires from relay, Red to battery, 2 Black - 1 to each light?, 1 Yellow to?, 1 Blue to?, & where do the xtra Black and Green wires go to? These...


Look on the relay for the terminal numbers.
Terminal 30 goes to the battery positive.Red Wire
The two terminal 87 go to the fog lights.Black Wires
Match the color wire with what you have on the relay connection for the rest of the wires.
Terminal 86 should connect to your low beam headlight.
Terminal 85 should go to the fog light switch.
The fog light switch should connect to the terminal 85 and the other terminal on the switch will connect to ground.

Dec 21, 2009 | 1987 Nissan Pickup

1 Answer

Fog lamps won't turn on


OK, you will need to first check the fog light wiring harness. make sure there are no worn wire lines or connections, replace if you see noticeable flaws in the wiring harness. Next, check the clip that fits over the back side of the fog light bulbs. Make sure that the inside copper pins are in good condition and, the the fit is tight. replace the wiring harness if these clips are worn or not fitting properly.

If the above inspections show no apparent wiring harness issues, you will then need to check for bulb failure. make sure that your fog light bulbs are operational. if the bulbs are ok, replace the switch.

Please rata and have a great day:)

May 20, 2009 | 2008 Chevrolet Malibu

1 Answer

Right side front light harness plug


That is exactly what it is. Most foglights connect to one connector

May 06, 2009 | 2003 GMC Sierra

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...