Question about 2005 GMC Canyon
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It's common that you get a lot of carbon build up at the base of the throttle body. Give it a good spray cleaning with injector cleaner and dry it with a hair dryer. If you find it still to dirty, you can try it again with a second can or if you can try using Sea Foam that you can buy at an auto parts store like Auto Zone. The Sea foam will clean out the carbon but also create a lot of smoke.
When i say lot's of smoke, just do a search on You Tube for Sea Foam. Good luck and hope this helps.
Posted on May 25, 2009
SOURCE: code p0506 for mustang gt
Disconnect the air intake duct from the trottle body. Clean the trottle body bore with alcohol to remove carbon deposits until clean. You have to flip the the trottle plate to do this. Clear code if you have a scanner or it will clear by itself if there's no problem after some key cycles.
Posted on Dec 18, 2009
At autozone service center its free to get car scanned.They dont charge for scanning .You get codes for free.------ But basically the diagnostic cost at local service centers is Approx $75.This is there starting price.It depends upon, how much time it takes.---------- Also confirm with any other local service center for the diagnostic price.----------- 178 is bit double the regular.------- ------------ Ask them to charge less.Its more then regular cost.-------- Thanks.Helpmech.
Posted on Aug 05, 2011
Tips for a great answer:
Jun 21, 2015 | Cars & Trucks
Sep 15, 2012 | 1999 Buick LeSabre
Sep 11, 2012 | 2006 Saturn ION
Aug 09, 2010 | 2004 Chevrolet Colorado
Jun 28, 2010 | 2006 GMC Envoy Xl
Jan 27, 2010 | 2004 Ford F150
Sep 04, 2009 | 2003 Pontiac Montana
May 25, 2009 | 2007 Ford Explorer Eddie Bauer
315 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: