Question about 1994 Chevrolet K1500

1 Answer

The return spring on the tbi is spung an it aks like the choke stays on...doesnt wanna kick off/down very well

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You should be able to get a new return spring from Auto Zone.

Posted on May 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a problem on a caburaror on aselerate truck 87 dodge


Idles, automatic chokes, and kick down idles must be adjusted. You cannot just install a carburetor rebuilt or new without making idle and linkage adjustments to match the engine requirements. Does it have an idle solenoid adjustment and kick down adjustment, double barreled?. Did you get new springs for linkage? Have a mechanic make the adjustments. Find an older mechanic that knows carburetors.

Feb 12, 2015 | Dodge Cars & Trucks

3 Answers

My 1983 toyota pickup carburetor flap wont close and it is letting in more air then fuel, so it dies when ideling. how can i fix this?


After 20 years on the road, the carb need to be taken apart and cleaned. It's a work for a mechanic.

Oct 23, 2013 | Cars & Trucks

1 Answer

Does a 1988 carborated Nissan pathfinder have a fuel pump regulator?


Are you sure it is a carburetor and not throttle body injection? They do look similar.
If it is a carburetor, there would not be a regulator. The fuel pump will either be a mechanical pump mounted on the engine, or a low volume electric pump in the gas line from gas tank to the engine.
If it is throttle body injection (TBI), yes, there is a fuel pressure regulator, probably located near the throttle body. It will have gas lines connected to it (one line will be a return line back to the gas tank) and a vacuum line. The fuel pressure on TBI systems is not as high as multi point injection, usually around 20 psi. You would have to check the specific pressure requirement for your pathfinder.

Take off the air cleaner cover and look at top of unit. A carburetor should have a choke plate right at top of the carb throat. However some Nissans by '88 had a carburetor without a choke-it used an enricher jet controlled by the ecu for added fuel when starting.. On a TBI, looking down at the unit where the air goes in, you will see one or two injectors with a wiring harness connected to them-each injector will have two wires connected to it.
If still unsure, check engine designation on the under hood label. Carbureted engines will have a s letter designation, injected engines will have letter i. To explain: my '87 Sentra is carbureted, so engine designation is E16s, some same engines were injected, so their designation is E16i.

Sep 29, 2013 | Cars & Trucks

2 Answers

Adjusting the choke


nice engine get rid of the choke all together you dont need it its just to choke the engine for cold starting i would get a 725 cfm without choke for it or turn it over to injection tbi or port. do you have an electric fuel pump you will want one when doing without the choke

May 20, 2013 | Cars & Trucks

1 Answer

The truck was dying sometimes. We changed the fuel pump out and now the new pump will not kick on. We spliced the wires and installed the new connector just like the paperwork showed, but it will not kick...


i dont believe there is a fuel cutoff switch on that yr but you might want to check the pump take it out and wire it straight to the battery for a few seconds if it doesnt kick on and stay on then return the fuel pump... if it kicks on and stays on then you might want to consider a new sending unit as well as the pump it doesnt cost that much more and then you wont have that worry later down the road

Sep 18, 2010 | 1999 GMC Sonoma

1 Answer

Theres a spring on the top of the transmission where the shifter is what is it for


that spring is for returning the shift down lever ford that year used rods for down shifting transmission when you use passing gear that rod gets pushed down once you get off pedal that spring returns rod back to place if spring is broken you transmission might stay in lower gears

Dec 30, 2009 | 1986 Ford F 350

1 Answer

I wanna know if the 1985 mustang gt 5.0 ho is electric choke or manual choke


Electric choke from the factory,the choke pull off runs off of power from the alternators stator post which supplies about 7 volts when its running.Spring tension and a stomp on the throttle set it.

Nov 05, 2009 | 1985 Ford Mustang

1 Answer

1990 full size blazer starts fine idles then dies


sounds real easy either a bad idle air control solenoid or more likley a blown throttle body gasket. to test fro a blown gasket, with engine running and cool spray carb cleaner or brake cleaner around base of tb were it bolts to intake. when it hits the bad area, should idle down and be normal for a second or 2. iac is possible,try this first since its so common and let me know

Aug 26, 2009 | 1990 Chevrolet S-10 Blazer

2 Answers

Emergency brake pedal will not stay down when i press it.


The parking brake actuator (the mechanism you press with your foot) works like a ratchet wrench. The pedal has a cresent shaped plate with teeth on it. It pivots on a mounting plate. There is a pawl with a small spring also on the backing plate. This pawl engages the teeth on the pedal assembly to hold the brake engaged (against the large return spring).
Stick your head under the dash and look carefully at the parking brake actuator mechanism. See why the pawl is not engaging the teeth on the pedal assembly. Most likely causes are that the release mechanism is jammed "on" or that the light spring which attaches to the pawl is missing (usually from being kicked by some one with large feet) View this mechanism on another GM vehicle with the same style parking brake if you suspect that parts are missing.
Charlie

Dec 07, 2008 | 2002 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...