Question about 2007 Dodge Charger SRT8 Sedan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 2 handles on the back of the seat where it attaches to the floor. If you hold the button on the handle and push it down it should release the seat from the floor. After this it just rolls out the back. Same for the middle seat if you need to remove it.
Posted on Mar 08, 2009
just pull up the lower seat in the back where the seat meets the back rest. and their will be two or maybe three bolt undo those and push up on the seat.Don't worry about being gental nothing to break on anything
Posted on Mar 18, 2009
The bottom of the seat is held by a clip on each end. Pull up on the front of the seat about a foot from each end. The back should have attachment bolts that are visable with the bottom removed.
Posted on Aug 07, 2009
SOURCE: cannot remove rear rotor
you can also spray a good amount of W-4 or any kind of rust solvent where the disc sits on the hub. Let it stay for a while make sure it is soaked, make sure the car is in Neutral not in park!! What you would want to do then is hammer with a 4LBS plastic mallet from the inside out of the rotor by rotating it in three to four different positions. Repeat this process a couple of times and it will come off. Make sure there is no locking washer on the wheel bolts, if so you will have to cut them off. Trust me i just changed mine two weeks ago and it worked fine!
Posted on Aug 21, 2009
SOURCE: remove rear seat impala2007
To remove the rear seat, pull up on the front of the seat bottom, it should be hooked in place by spring type clips. After you get the front edge up, pull out the seat. This should expose the bolts/screws that hold the seat back in. Look below and there should be a couple of screws holding the seatback to the car body. Remove these and then you can pull the seat back out of the car.
Posted on Aug 29, 2009
Tips for a great answer:
Nov 19, 2015 | Dodge Cars & Trucks
Mar 29, 2015 | 2007 Dodge Dakota Cab SLT
Oct 26, 2014 | 2007 Dodge Charger Daytona R/T Sedan
Apr 23, 2014 | 2007 Dodge Charger SRT8 Sedan
Sep 18, 2012 | 2011 Dodge Charger
Jun 09, 2012 | 2007 Dodge Charger SRT8 Sedan
Nov 30, 2011 | 2007 Dodge Charger SRT8 Sedan
Mar 30, 2011 | Dodge Charger Cars & Trucks
May 06, 2009 | 2007 Dodge Charger Daytona R/T Sedan
Apr 02, 2009 | 2009 Dodge Charger
647 people viewed this question
Usually answered in minutes!