Question about 2000 Ford Mustang

1 Answer

2000 6 cyl mustang shutters sometimes while driving

It seems to me that it's probably the spark plugs needing to be changed or the PCV valve.  It doesn't always shutter but when I accelerate it begins to and not sure that that is.. Sometimes it starts to shutter without accelerating...it doesn't when idling just when start moving

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Try doing a spark test to insure that you are getting a good spark if you have a good spark then i would try doing a tune up and replacing the pcv valve and if you have a check engine light on go to a local parts house and have them do a obd2 scan and see what that comes out to be because it could also be the egr system hope this will help you out please leave a review thanks sincerely D.Jones

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there a miss in cyl. 1 that only occurs at idle speed, which seems low (750 rpm)?


Bad head gasket, burnt/stuck valve, or bad piston rings. Do a compression test. None are worth fixing in a high mileage car. It only creates other problem.

Apr 05, 2016 | 1999 Plymouth Breeze

2 Answers

How can I get my truck to pass an emissions test when it failed for a high NOx levels?


Sometimes doing a few simple things can not only reduce the emission levels but help your vehicle overall. For starters, check things like the air filter to ensure it isn't dirty and restricting air so your not burning more fuel. Check the spark plugs to make sure all the cylinders are burning fine with no signs of internal issues. Even changing the pcv valve can play a part. Your vehicle is a 94 therefore first generation of diagnostics and have to run a dyno. Sometimes the easiest things are the ones overlooked. Getting into oxygen sensors and catalytic converters seems logical but can be very expensive and not solve your problems. Try the easiest and cheapest way first. It may help more than you think. I hope this tip helps. Good luck.

Jan 10, 2015 | 1994 Toyota Pickup

1 Answer

My 4 cyl mustang is working with only one cylinder spark plugs, cables and ignition coils are new what is it?


When you have Coil Packs not firing Spark... it's usually due to one of two reasons: 1.) the Coil Pack is BAD 2.) the Ignition Control Module (ICM) has fried internally and is not activating that specific Ignition Coil within the Coil Pack ...The most common is the ICM ...The probable reason your catalytic conv. gets red hot is due to raw gas being dumped through the exhaust from the no fire on your cyl... Running it like that can cause severe damage to your conv...

Sep 30, 2012 | 1993 Ford Mustang

1 Answer

Spark plug on cyl 8 was cracked and looks to have had dust of some sort shot from the cyl through the top of the valve cover. Car has a bad miss associated with this cylinder which a plug boot and...


Sometimes vehicles from the 1990s that are Ford have a problem with the spark plugs wearing down the electrodes until gas builds up and shoots the spark plug out of its threads when too much gas builds up in a cylinder and it detonates.

Have you changed the spark plug after changing the plug boot and ignition coil?

If the car won't turn over, the battery might be dead or low on charge.

Good luck on this repair.

Jan 13, 2011 | 1999 Ford Mustang Cobra

1 Answer

2000 ford mustang 4.6 is coming up with code of bank 2 sensor 1 an changed plugs an 5 an 6 cyl plugs were black but no plugs were wey


ur engine is a v6, the head that has the number 1 cylinder is bank 1, so u need to go to the second head and follow the exhaust line, ull find a sensor there, probabbly has 4 cables looks a lot like a spark plug, thats ur oxygen sensor, that probabbly needs to be replaced.
hope this helps
have fun!

Oct 31, 2009 | 2000 Ford Mustang

1 Answer

I need to get a new pcv elbow connector for 95 chevy beretta v6


I have taken a spark plug boot of of a 90 degree boot of the wire and use this it works so check the junk yard for a plug wire with a 90 degree boot on it and pull it off the wire :)

Sep 29, 2009 | 1995 Chevrolet Beretta

1 Answer

Want to locate pvc valve on 2000 pontiac grand am 6 cyl


You'll find the PCV valve on the right side of the front valve cover. You'll need to remove the valve in order to troubleshoot it to determine if you need a replacement. To remove, pull the PCV valve out of the cover and detach the hose

Test the old PCV valve to determine if it needs replacing. Blow air through it in order to see if it is clogged. If it does not seem to ventilate, then you'll need to install a new valve.

Pop the new PCV valve into the spot of the old valve. With the correct part, it should snap right in. Take the hose and reattach it in order to complete the installation.

Aug 21, 2009 | 2000 Pontiac Grand Am GT

1 Answer

I was told a a 2000 lincoln town car (8 cyl) has no spark plugs.


replace the spark plugs, replace the air filter if dirty or has more than 30,000 miles, replace the fuel filter if more than 30,000 miles. clean the PCV system and valve.

Feb 15, 2009 | 2000 Lincoln Town Car

2 Answers

2000 mustang 3.8 l motor makes rattling noise when driving


have you checked to see if the parts store lists a knock sensor for your vehicle?

Dec 26, 2008 | 2000 Ford Mustang

9 Answers

1995 ford escort idle problem


Hi , i have a 1995 Escort with 1.9 4 cyl engine , at cold start the engine revs ok but as it get warmer it start to idle rought and die , with a scantool the o2 sensor always reed lean at idle , after checking fuel pressure , air mass meter , EGR valve , and potential vacuum leak at intake and hoses , its the PCV valve that give me that problem , as i remove the pipe with the valve there was a whissle noise comming from it , when i block the valve at its tip the whissle noise stop the engine revs smooter and the o2 reads normal , i replace the PCV and its idling good .

May 31, 2008 | 1995 Ford Escort

Not finding what you are looking for?
2000 Ford Mustang Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...