Question about 1997 Land Rover Discovery

1 Answer

Looking for the torque specs for the head bolts for a 4.7L land rover discovery

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Not sure if you know this but you can go to

mitchell1diy and for ten bucks you can get everything about your car.

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Had the 03 land rover 2.5 engine how to tighten the cylinder head


Torque specs and the order are listed here.

My mother worked at Land Rover for 18 years!



Land Rover Head Bolt Torque Specifications

Jul 01, 2016 | Land Rover Cars & Trucks

1 Answer

CYLINDER HEAD TORQUE SPECS?


They should be 95ft pounds ! but some years vary! So spend the 25 bucks on the manual for your year, make and model ! good luck!

Jul 14, 2014 | 2004 Land Rover Discovery

1 Answer

I would like the cylinder head torque setting for my landrover dicovery2 v8


Hope this helps you.

Cylinder head bolt's torque.

Engine with Suffix B, Cylinder head will have 10 bolt's.
Ft.lbs (N.m)
Step 1 - 15 ( 20 )
Step 2 - Additional 90 deg.
Step 3 - Additional 90 deg.

Engine without Suffix B, Cylinder haed will have 14 bolt's.
Ft.lbs (N.m)
Outer Row 44 (60)
Center Row 66 (90)
Inner Row 66 (90)


2ff67ca.gif28d5a83.gif

Sep 17, 2010 | 1995 Land Rover Discovery

1 Answer

Im having to change my head gasket, whats the torque spec and sequence on a 96 landrover discovery? im changing both head gaskets. anything i should know?


start in middle and work outwards alternately ,bolt torque 80lbs and pull down if three passes ,speed key --rachet- torque wrench .although iam posting this i never use a torque wrench i go by the feel of the bolt stretching ,make sure heads have been checked and skimmed before refitting

Aug 10, 2010 | 1997 Land Rover Discovery

1 Answer

What are the head bolts torque settings on Land Rover Freelander R reg?


this info is avalible in Chilton manual . avalible at a Auto pro /CTC / or your local dealership as well.

Mar 12, 2010 | 1998 Land Rover Discovery

1 Answer

I have a 2001 land rover discovery II and I need the torque settings so I can put the engine back togather. Im not sure how tight to tighten the head cylinder bolts or the manifold bolts.


Do not reuse the old head bolts. These are torque-to-yeild type bolts and stretch when torqued down.

Starting in the center and working your way outward:

1st step - 15 ft-lbs

2nd step - 90 degrees

3rd step - 90 degrees

Mar 05, 2010 | 2001 Land Rover Discovery Series II

1 Answer

What are the head bolt tightening specs for a 2000 range rover with a 4 ltr v8


Remember the head bolts are not reusable. They are stretched, not torqued. I can't post illustrations here but the pattern can be found at LR’s service website, www.landrovertechinfo.com (you can register for free). The bolts are tightened to a light torque of 15 foot pounds, then turned through two angles of 90 degrees each.

Jan 10, 2010 | 2000 Land Rover Discovery

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
1997 Land Rover Discovery Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...