Question about 2000 Jeep Grand Cherokee

1 Answer

Drivers seat broke loose need to remove to fix

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Hello there:
for removal of the front seat you will have four bolt that go threw the floor board they will be under the carpet and more than likely will take a large tourq driver to get them out you may also have electrical connection under the seat if you electric seats so make sure you unplug the wire before removing the seat this will give you access to the part that needs to be replaced the bolt should be able to found by lifting the carpet right at the seat mounts in the front and the rear should be visible hope this helps you out sincerely D.Jones

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loose drivers side seat on 1998 acura


if you look , you'd have seen them.
but id bet it not the bolts. but do look
what you do is look at the track.
the track has 2 parts. bottom and top
if you wiggle the seat and the :
bottom wiggles with top , the base is loose.
if the top and bottom tracks , only move there, the track is bad.
there is no visual play at track juncture. so..... if there is, its bad.
if the base and track dont move the seat frame is cracked.
sounds hard, no,
its a 10 second job, you look and see what is loose.

now my wild useless guess.
the someone removed the seat, and its on back on track.
or as my fat boss did, broke the seat frame.

Dec 03, 2013 | 1998 Acura CL

2 Answers

1999 GMC yukon looking for front driver seat


When mine broke I want to scrap yard and removed bymyself for $50.

Apr 03, 2013 | GMC Yukon Cars & Trucks

2 Answers

My gear shift broke off column estimate how much to fix


If you know what you doing about 2 hours taking your time

Mar 06, 2013 | 1996 GMC Sierra

1 Answer

Loose wiring on drives seat adjustment


You should be able to see the seat bolts ,that go through
the floor pan
Not all seat bolts are hidden by a plastic cover & you can see under the car where the come thru
You need to disarm the SRS System (Air Bag) before you work
under a seat on the wiring

May 15, 2012 | 2005 Cadillac DeVille DTS

1 Answer

Driver door jammed wont open from in, out or with key (Kia Rio 2005)


are you sure the seat belt isnt jamed in it? or something else ? if so you got to push in as you lift handle then pull out, thats what works with mine. if thats not the problem something probley broke or came loose going to have to remove door panel to fix , and yes its going to be a job and yes you will be cursing. got to push driver seat front back and back rest all the way down and all the way up to get to all the screws and or pop outs, personaly i dont know how yours comes off. but ive had the same problem with a couple of other cars ive owned.

Aug 06, 2010 | 2006 Kia Rio

1 Answer

Drivers seat


You need to unbolt the seat from the floor, then put a large piece of sheet metal or really large flat washers (at least 3" diameter) under the legs to distribute the weight more evenly. How you repair the one that broke is largely dependent on if the leg broke or if it went through the floor. you can replace the seat with one from a scrapyard or if you know someone who can weld it without setting it on fire, (don't attempt to weld with the seat in the car) do that. if the leg went through the floor, then just use a large plate underneath to reinforce it and replace the bolt if necessary. Usually the bolts are case hardened steel so if one broke it may be easier to cut them all off and re-drill new holes just in front or behind the old ones. I'd only do that if the old one cannot be drilled and re-tapped though. Always use grade eight bolts to replace hardware. They will prevent the seat from tearing from the floor in an accident.

Jun 01, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Drivers Power seat broken-the support metal arm-2004 Grand Cher


Should just be 4 bolts holding the seat to the floor, and unplug the wires. Only way to fix it is weld it, or get a different base from an auto wrecker.

Nov 02, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Front passenger seat won't move back, stuck in forward position


You better get a mirror to check under the seat , there might be a loose or disconnect or broke spring . Compare it to your driver's seat so you can find the difference and what's broke or disconnect.

hope this will helps a little !

Oct 15, 2009 | 1995 GMC Jimmy

1 Answer

Driver seat not moving back and forth


under the seat is a thin wire that goes from one side to the other it has most likely broke you need to find the secondary lock it was connected to and release it to move the seat but you must also release the main lock so i suggest replacing the wire . THIS IS FOR MANUEL SEATS 
now as for power seats you will have to locate the power lead wire and make sure it is not broke if so you can replace the connecter with an aftermarket one and it may work again

May 15, 2009 | 2004 Honda Accord

1 Answer

Repairing driver's side car seat


Not sure but be sure to disconnect the battery or you may cause the SRS light to light.

May 06, 2009 | 1996 BMW 318

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...