Question about 2006 Nissan Frontier

2 Answers

No power when the key is turned and clicking noises are heard from the inside of the vehicle when the key is not in the ignition.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

Sounds like a fouled battery or bad connection to the battery.

Posted on Aug 05, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turning the ignition switch several times before it will start. Replaced old battery.96,000 plus miles on it. Starter exhibits the same problem.. intermittent engine start after several tries.

Posted on May 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to diagnose vehicle will not start. Turn key and makes a click sound heard from dash or under hood.


Sounds like possible low battery. Could also be bad connection in starter switch, but test the battery first. Batteries do get old and don't hold charge. Check charging system, too.

Sep 22, 2015 | Cars & Trucks

2 Answers

Electrical burnt smell


If you had a short in the starter motor windings and held the key, you'd get a click and a burning smell. That would be the insulation burning off the electrical windings. There's a 40-amp max fuse in this circuit.

Jul 21, 2017 | 1995 Chevrolet K1500

2 Answers

2004 Chrysler Pacifica makes clicking noise without key in ignition


im having the same problem with my 300m they say its cuz the alarm was triggered at some point and it needs reset

Jan 20, 2013 | 2004 Chrysler Pacifica

1 Answer

With no previous indication, when I turned the ignition key on my 1997 Mercury Grand Marquis, it just limply spun over to the "on" position. The engine test lights came on and would not go out...


Hello, I noticed this post is 6 hours old. If you remember turning the Ignition switch, there is a replaceable core for the key, and the switch housing is what the core goes into. If you did not replace the switch housing you probably have a broken spring in the Ignition housing.

On most Ignition switches you have to set the switch to Run or ACC positions, press a pin release at the bottom of the Ignition housing, and then slide out the core with your key. At any other position, the core should not slide in; if it does it will be out of alignment.

There is also an adjustment on the Ignition switch outer housing. This adjustment lengthens or shortens a connecting rod or cable inside the steering column so that the Interlocks will line up with the switches. The switch below the dash is called a "neutral start" switch which cuts power to the Starter circuit unless the gearshift is in Park or Neutral and the foot is on the brake. All in all this arrangement is an Interlock system.

It sounds like the Ignition switch is out of sequence or has a busted spring. You should be able to take the switch off and take it back to the store and see why the switch does not spring back. Also save a trip and look under the dash at the foot pedal lever and look for a broken switch there too.

The noises you heard were in the Powerbox. Your Ignition switch is not shutting off and the Relays are remaining on and live. You should have a power relay in the Powerbox, but the limp return on the Ignition switch is what is keeping the power on.

I hope my solution will be very helpful in fixing this. Just take the keys, the ignition switch, and get one that has a working spring in it.

May 23, 2011 | 1997 Mercury Grand Marquis

1 Answer

Random clicking noise when key is engaged but stops


The sound is a relay switching over when you insert the key and power the vehicles accesories. It is a normal sound, but whatever that relay powers may fail soon. It sounds like the small electromagnet inside won't hold the voltage, hence the clicking sound.

Aug 31, 2009 | 2007 Lexus RX 350 FWD

1 Answer

Engine dies while driving.


the noise you heard in the rear was the electric fuel pump working but it sounds like you have an electrical issue check your wire harness for areas that wires chaffed on metal and cause break in the electric current some known areas are inbetween the radiator and the transmission down towards the tranny pan also check fuse panel might have a loose fuse

Jul 02, 2009 | 2001 Dodge Neon

1 Answer

When the ignition key is turned a clicking noise is heard.


Sounds like a bad ground. If the battery voltage does not drop when the starter is engaged, the starter is not getting the juice. Check the ground connection again. 90%

Apr 19, 2009 | 2002 Chevrolet Silverado 1500HD

1 Answer

1996 Toy Tocoka ignition/starter


that is a starter solenoid problem.

starter has its own solenoid. the big round thing besides the real motor.

it has contacts inside which could be worn out .

that is why sometimes it make contact and sometimes not.



tnx 4 using fixya,

drcool

Sep 16, 2008 | 1996 Toyota Tacoma

Not finding what you are looking for?
2006 Nissan Frontier Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...