Question about 2000 Chevrolet Malibu
Go to the parts store and get a thermostat and gasket-O-ring seal for your engine. Follow the upper radiator hose to the engine. Where the hose is clamped to the housing (goose neck) there should be 2 bolts that hold the housing on. You need to drain the radiator (anti-freeze) so it's level is lower than this housing (into a pan so you can put it back in). Then clean both surfaces and install the new seal and thermostat and refill the system. Some of these cars have a bleeder screw on the housing or near it to get the air out while filling the radiator or after it is running.
Posted on May 30, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Posted on Mar 27, 2009
are u the original owner of the car ?if so do you still have the books that came with the car? look for the delco radio book !there should be a card in there with a code and instructions! if not the only wasy is to go to the dealer or a radio repair shop to have it unlocked!
Posted on Mar 17, 2010
check to make sure fans are working for radiator. if not check coolant tempurature sensor, fuses, and relay. is all air out of coolant system!
Posted on Jul 07, 2010
Tips for a great answer:
Jan 29, 2013 | Cars & Trucks
Sep 22, 2012 | 2000 Chevrolet Malibu
Aug 31, 2010 | 2000 Chevrolet Malibu
May 18, 2010 | 2000 Chevrolet Malibu
Mar 14, 2010 | 2000 Chevrolet Malibu
Jan 02, 2010 | 2000 Chevrolet Malibu
Dec 20, 2009 | 2000 Chevrolet Malibu
Dec 08, 2009 | 2002 Chevrolet Malibu
Sep 16, 2009 | 1999 Chevrolet Malibu
1,321 people viewed this question
Usually answered in minutes!