Question about 2005 Honda CR-V

2 Answers

Why is the Vsa and abs staying on in 2005 honda crv?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 229 Answers

Hi did you check your tire pressures and brake fluid level? That would be where I would start to look. If you have changed your tires or adjusted your tires you may need to reset your VSA.
Else you may have a speed sensor issue.

Posted on May 30, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 117 Answers

Sometimes, if you have lock break fluid level it can signal the compute to illuminate the abs light. I would check that as well. Also, how do the breaks feel??? spongy/soft, pedal hits the floor, if it does anything like that, you have a problem, in that there is a leak somewhere... best of luck, this is usualy the 75% problem solution, if not, it could be your abs module which i hope its not cause they are expensive to replace

Posted on May 30, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 867 Answers

SOURCE: vsa and abs lights on for 2005 honda crv

Check to make sure that your ABS wheel sensor is bolted firmly to the hub and that the wire that comes from it is plugged in properly. sometimes they look like they are plugged in but are not fully locked in.

Posted on Mar 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VSA,ABS,Brake,and triangle w/exclamation constantly on


Vsa,abs,and brake all work off of the same sensor. You have a problem with one of the following system. Vsa vehicle stability assist, abs anti lock brakes, or the brakes themselves. My guess is either the abs or vsa

Apr 23, 2016 | 2005 Honda CR-V

1 Answer

Honda civi VSA ABS light stays on


have your abs codes read out to see whats wrong.

Mar 19, 2015 | 2005 Honda Civic

1 Answer

Engine,vsa and triangle light comes on when driving a few miles


Check vtec solenoid gasket/screen.If dirty replace gasket/screen.

Aug 01, 2014 | 2005 Honda CRV 2.2

2 Answers

Vsa and abs lights on for 2005 honda crv


Check to make sure that your ABS wheel sensor is bolted firmly to the hub and that the wire that comes from it is plugged in properly. sometimes they look like they are plugged in but are not fully locked in.

Mar 06, 2012 | 2005 Honda CR-V

1 Answer

2005 honda accord diagnostic codes


you need to connect the car to a fault code reader this will tell you if an abs sensor is faulty and which wheel it is or if it is the abs unit

Dec 15, 2011 | 2005 Honda Accord

2 Answers

VSA and ABS light indicator stays on


Please see my tip at http://www.fixya.com/cars/r6003525-abs_traction_control_lights . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Dec 18, 2010 | 2005 Honda CR-V

2 Answers

2006 Honda crv, vsa, abs, and triangle light are permanently on


You are talking about the VSA activation indicator (triangle with exclamation point in the middle):
This indicator has three functions:

It comes on as a reminder that you have turned off the vehicle stability assist (VSA) system.

It flashes when VSA is active.

It comes on along with the VSA system indicator (the rectangle with VSA in it) if there is a problem with the VSA system.

This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position, and when the ignition switch is turned to the START (III) position.

Hope this helps you understand the problem.

Dec 09, 2009 | 2006 Honda CR-V

1 Answer

Purchased certified 2007 crv with 40,000 miles. took to alarm shop to have an after market alarm installed. came out with the vsa warning light on. what might have caused this? took to honda dealer, they...


Thats why you dont take your vehicle to some kid at the stereo shop without a wirnig diagram to poke around and screw up your car. You should have OK'd the Honda dealer to fix it, and have the manager from the steroe shop pay for any repairs. Sounds like a bunch of parts changers are just replacing parts without testing. Once you buy parts like that, there's no refunds.

Oct 18, 2009 | 2007 Honda CR-V

Not finding what you are looking for?
2005 Honda CR-V Logo

1,167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...