Question about 2004 Lincoln Navigator
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!
Posted on Jan 07, 2009
Most volvo headrest can be removed by releasing the catches which are on the back of the headrest on some models and on the front on others I believe on 960 they are on the back. To release the seat on a 960 look where the shafts should be then follow it down on the back where the seat back top stops then goes in press around that area you should be able to find the catch there pull up on the headrest while releasing the catch you have to do this on both sides. The headrest should come off this also works on 740 and 760 series the volvo 780 is a different story the only way to get the headrest off on that is to disassemble the seat
Posted on Mar 14, 2009
the sub panal doesnt come off seperate you will break it if you try and you will need to remove the whole side panal its e-z afer the panals removed good luck and remember dont force or pull to hard
Posted on May 07, 2009
on the passenger side feel under the seat and there is a lever that pulls toward you as you stand at the sliding door.
First, raise the armrest, then lower the back all the way forward. Then remove the headrest sit it out of the way and while pulling the lever under the seat towards you, lift up the seat from the back so it tilts forward. When it is standing on its "nose" lift first one side shifting it either forward or backwards to clear the rod on which it is hooked. Do the same with the other side of the seat and then lift it out. Installation is the reverse of removal.
The other seat is much the same, though sometimes the lever is a little different but in the same place.
Posted on Jun 09, 2009
I just fixed my dad's 04 suburban with the back seat's #1 lever not budging. It's a surprisingly simple fix: take a 5 inch flat head screw driver and as you look into the slot where the #1 handle goes, you will see a wheel mechanism that it is connected too. to the left of that wheel, you will see a hammer mechanism with a cord attached to it. all you have to do is carefully push the lever with the screw driver while gently lifting up on the handle.
Hope this helps!
Posted on May 21, 2011
Tips for a great answer:
Feb 22, 2017 | 2004 Lincoln Navigator
Apr 04, 2012 | 2005 Lincoln Navigator
Nov 29, 2010 | 2004 Kia Sedona
Aug 01, 2009 | 2004 Lincoln Aviator
Mar 19, 2009 | 2004 Lincoln Aviator
Mar 02, 2009 | 1997 Mercury Villager
Feb 25, 2009 | 2003 Lincoln Aviator
Oct 10, 2008 | 2004 Ford Expedition
Sep 04, 2008 | 2004 Chevrolet TrailBlazer
Jul 13, 2008 | 2004 Toyota Highlander
Aug 11, 2016 | 2004 Lincoln Navigator
310 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: