Question about 1991 Toyota Celica

1 Answer

How to bleed the petrol line? - 1991 Toyota Celica

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Unhook the petrol line from the fuel rail and prepare to catch excess fuel in a bucket. Check your trunk for a bleed button as some vehicles have a blead circut built in. If you cannot find one then just try and start it. The fuel pump will turn and send fuel up the line and into the bucket. when it is all the way pinch the hose lightly (to retain pressure) and hook it back up to the rail.

Posted on May 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Accidentally put unleaded fuel instead of diesel in 2013 D22 drove approx 10k


Drain the fuel out and flush the fuel lines and the filter. Failure to purge the unleaded fuel from the system can destroy the engine due to severe pre ignition.

Feb 18, 2017 | Cars & Trucks

1 Answer

How do you bleed the air out of the fuel line after replacing the fuel pump?


Diesel or petrol?

Go to the highest point on the fuel system where there is a connector/union/joint. Undo it, place a rag around that joint to soak up fuel ... and spin the engine.

It may not be air in the system that is causing your problem. Usually, a petrol engine doesn't require bleeding.

If you can locate the fuel filter ... also try 'cracking' and tightening the outlet side as somebody cranks the engine for you.

Nov 03, 2015 | Cars & Trucks

1 Answer

HOW TO CHANGE LAND ROVER FREELANDER FUEL FILTER 2012 PRIMING AND BLEEDING


which engines, you do know the engine size, type ,name and gas/diesel , dictates what fuel system you have, right?
most gas cars, USA have moved this to the inside of the gas tank
by uSA EPA edicts. i sure as heck cant speak for non USA cars.
lacking the engine facts or country.

gen4, line up
3.0 L V6 Petrol
5.0 L V8 Petrol
3.0 L V6 Diesel
4.4 L V8 Diesel[1]

which one?

state side the EPA mode the filter inside the tank. to lower fuel heating and bingo evaporation losses (fact)

Dec 27, 2014 | Land Rover Cars & Trucks

1 Answer

How to bleed air from my fuel line on 2003 nissan navara 3.3 v6 petrol? also how to test my fuel pump to see if its working properly?


It is not necessary to bleed air in your system as the fuel flow through the lines will pass the air back to the tank. have a fuel pressure test done on the fuel manifold and it will check fuel pump/ filter and fuel pressure regulator.

Sep 22, 2013 | Nissan Cars & Trucks

1 Answer

How do I bleed the fuel lines for a 1995 Honda Civic four-door LX?


easy just suck on the pipe till the petrol comes up ,finger on the end of it the push it on quick ,as this is a manual pump with a carb on this year car then on the outlet pipe to carb pour some petrol down this pipe to make the valves in the pump wet and it will then draw the fuel up .

Nov 27, 2012 | Cars & Trucks

1 Answer

I just replaced both fuel filters and now the truck won't start.


Hi,
If that is a DiESEL engine, you have to bleed it thoroughly until there is no air in the fuel system. Check the top of the filter and unscrew the bleeder nipple and pump it fuel and air will come out.
If it is a petrol engine, air must have been stuck on the intake fuel line, bleed it until pure liquid comes out from the fuel filter hose output.
Check your fuel gauge, you might not have enough fuel!
Hope that helps you out.

Aug 06, 2011 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Petrol put into diesel car now it wont start


Drain all the petrol on your tank and so on the injection pump by pumping it. Open or loosen small tube going into the engine from the injection pump, to drain all petrol.

Make sure that petrol are remove from the engine fuel system, change fuel filter also. After removal bleed the engine.

Feb 28, 2011 | 2002 Jeep Grand Cherokee

3 Answers

How to drain ford fusion fuel tank


The "MOST EFFECTIVE
" way is to REMOVE The FUEL TANK and DRAIN it By Tipping it over to Pour From FUEL INLET HOSE. Im Sure you Dont want to Here this as it Requires Much WORK . , BUT It IS The MOST EFFECTIVE Way to EMPTY The TANK.

Oct 31, 2009 | 2004 Ford Fusion

2 Answers

I have a 1988 Ford Ranger and the engine won't turn over. Sounds like it wants to start but won't. Any suggestions on where to start to look for the problem.


If it's trying to start then this would indicate that it is getting spark to the plug's (if its a petrol) Check if it is getting fuel ( petrol or diesel) Its most likely a fuel problem. If petrol check the carb. first pake off the intake at the top of the carb. and pour a small bit of petrol in and try starting it should start up for a few second's if this work's check the fuel lines filters etc. If its diesel check fuel filter an and if its clean then it could be drawing air into the system usually at the filter simple check is disconect the fuel line to the filter and the one fron the filter to the pump. join these two pipes together get a suitable piece of pipe that will fit tightly between them try turning again mite take a bit of turning as the system will have to bleed itself. Let me know if you get it fixed and please add if it's petrol or diesel save me a lot of explaining we can get it going no matter what the problem is. But as you asked this is somewhere to start.

Aug 12, 2009 | 1988 Ford Ranger

1 Answer

1995 Volvo 240GL sedan. Fuel injection. Petrol (gasoline)


no /just cycle the key a few times/sounds like you need to check other areas/why did you change the filter/how did it run before

Jun 22, 2008 | 1984 Volvo 240 Series

Not finding what you are looking for?
1991 Toyota Celica Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...