Question about 2000 Daewoo Lanos

1 Answer

Clutch on Daewoo Lanos 2000 is not pushing down to floorboard not enough clutch to engage gear. What can I do

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 22,246 Answers

Fit a new clutch ,its easy on these cars to do and including a tea break should not take more than 3 hrs to do even by the most inexperianced mechanic

Posted on May 30, 2010

  • turtletrade Oct 23, 2010

    my Lanos had the same problem but it was not the clutch< the shift arm shaft twisted at a weak weld due to fatigue and as a result the fork wouldn't push the release bearing far enough to disengage the clutch. the fix was to take the shift arm out, heat the weld point, reposition the arm relative to the shaft to increase the fork travel and re-weld to secure position, it works great now. This from what i hear is a vexing problem because the part doesn't look like it has twisted; but trust me it has. The weld cracks internally and the shaft moves to the next friction point that makes it look solid but really isn't. You will see this when you take the part out and heat it, it will move easily. My mechanic is a genius for figuring this out.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a problem no power when in gear from clutch slipping


Hi this sounds like the clutch is slipping , the cause could be a worn out friction plate commonly known (clutch plate) or it could be contaminated with oil either via a leak at the rear main seal or the transmission spigot shaft seal , it is best to replace the entire clutch kit , have a technician check the freeplay of your clutch pedal as a point of depature.
Hope this helps a bit,
Faldih Higgins
Automotive Diagnostician at Autocom SA.

Jul 21, 2014 | 2000 Daewoo Lanos

1 Answer

I have a 2000 Lanos when i push the clutch pedal in it stays on the floor and you can not shift gears?


Sounds like the hydraulic cylinder is faulty. probably need new inside. You should be able to buy a kit for it. It will need bleeding when fixed.

Aug 23, 2011 | 2000 Daewoo Nubira

1 Answer

New slave and master for clutch still will not engage did bleed


If all the air is out of the clutch system than you probably have badly worn fingers on you clutch plate and it should be replaced as an assembly, clutch disk, clutch plate(pressure plate) and throwout bearing. Thank you, Dana

Sep 29, 2009 | 2000 Daewoo Lanos

1 Answer

How to replace front wheel bearings on 2000 Daewoo Lanos


they come as a whole assembly hub and all

Feb 15, 2009 | 2000 Daewoo Lanos

1 Answer

Trouble Shifting Gears in 2000 Daewoo Lanos


this is a clutch problem, do u have any play in the pedal? it should not have any play, if it does the hydraulic clutch release is the problem.

Dec 17, 2008 | 2001 Daewoo Lanos

4 Answers

Car will not drive, is it clutch or cabel


my daewoo lanos wont shift into gear/s while running even when clutch is depressed all the way

Nov 12, 2008 | 2001 Daewoo Lanos

2 Answers

Car engages in gear without clutch pedal down and car will not drive daewoo matiz


if it wont drive how do you kno its engaging if it is in gear and you arent pushing in the clutch it should move forward if it doesnt move then you will have to replace the clutch

Nov 12, 2008 | Daewoo Nubira Cars & Trucks

Not finding what you are looking for?
2000 Daewoo Lanos Logo

Related Topics:

943 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...