Question about 1998 Ford Econoline

1 Answer

Can't find the plugs to change - 1998 Ford Econoline

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 70 Answers

You will need to remove the engine cover from inside and the spark plugs go straight down from the top of the engine. If this is a 5.4 liter engine or the 6.8 you will need to remove the coils from each individual cylinder and the plugs are under the coils. If you have the 4.6 then you have plug wires and the plugs are obviously under the wires but still from the top side of the engine.

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 acura 2.2 cl engine light p0302 code


A P0302 is indicating that cylinder # 2 is misfiring...Cylinder # 2 is the second plug counting from the front to rear of engine...Main causes for misfire are: defective spark plug, spark plug wire...When was last time plugs were changed? if it has been awhile I would suggest changing them...Also the spark plug wires should be replaced...Changing one plug and/or one wire isn't a good idea; change them all...Plugs cost two or three dollars apiece and a set of wires around $15...Standard motor products wire set # 4717...Spark plugs; Bosch platinum gaped at .044

Nov 13, 2015 | Acura Cars & Trucks

1 Answer

How to change spark plugs and wires on a 1998 Ford F150


Change the coils and the plugs. If you feel any hesitation or skipping its going to be one of the other causing it. Best change them all

Oct 25, 2014 | Ford F-150 Cars & Trucks

1 Answer

Change Plugs and wiring on 2002 Buick Park Avenue?


not sure what you want to know. disconnect the plug wire from the plug one at a time then remove the plug with a 5/8 plug socket, reattach wire then repeat for other cylinders. or you can change the plug wire when you change each plug one at a time so you won`t get the wires crossed.

Aug 17, 2014 | Cars & Trucks

1 Answer

Change spark plugs on a 2004 buick lesaber


Why you want change spark plugs wire .THIS IS LAST THING TO CHANGE.Change spark plugs I agree.

Apr 01, 2013 | 2004 Buick LeSabre Custom

1 Answer

My car has been idling low. i have changed the plugs.


Usually when you change the plugs that you also should change the distributor cap and rotor as well. When you changed the plugs with hopefully with the Alero specifications type manufacturer spark plugs that you have to also change the timing belt too is why your idling is low. All spark plugs have a gap in them so your car special plugs should too. You might have the wrong spark plugs with the wrong gap in them so you can ask autozone for the gap specs for your year, make and model plus you can buy the right spark plugs there too. The spark gap will change the timing of car depends on the gap.

Jun 09, 2011 | 2004 Oldsmobile Alero

1 Answer

Engine missing wont fire properly, i think its the spark plugs how do i change them ?


CHANGE SPARK PLUGS.YOU NEED SPARK PLUG 3/8 SOCKET.YOU NEED SHORT AND LONG 3/8 EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER AND A SPARK PLUG GAUGE SET THE SPARK PLUG GAP.NOW CHANGE 1 SPARK PLUG AT A TIME SO YOU MIX THEM UP GET FIRING ORDER MIX UP CAR BACK FIRE WONT CRANK.ALSO CHANGE PLUG WIRES ALSO.

Nov 10, 2010 | 1994 Honda Civic

1 Answer

I would like to know how to change the spark


FIRST OF ALL YOU HAVE CHANGE SPARK PLUGS WHEN ENGINE IS COOL.IF YOU CHANGE THEM WHILE ENGINE IS HOT YOU COULD DAMAGE THE ALUMINUM HEADS OR CAUSE DISTORTION.TO CHANGE SPARK PLUGS YOU NEED A SPARK PLUG SOCKET.A TORQUE WRENCH.ITS NOT MANDATORY.BUT IT WILL KEEP YOU FROM OVER TIGHTEN SPARK PLUGS.YOU NEED A 3/8 RATCHET AND EXTENSION.YOU ALSO NEED A SPARK PLUG GAP GAUGE.AND SPARK PLUG BOOT PULLER.YOU ALSO NEED SOME ANTI SEIZE COMPOUND.TO PREVENT DAMAGE THREADS WHEN INSTALLING THE SPARK PLUGS.

Oct 13, 2009 | 1999 Ford Expedition

1 Answer

Change spark plugs on 2007 Toyota Camry


In servicing the spark plug . If the owner will be the one to change the spark plug then. the owner should locate the spark plugs . then prepare the equipments that is going to be used to change spark plug .First disconnect the spark plug cable to the spark pug . Then use the equipment to take the spark plug off to the engine. The spark plug should be twisted counter clock wise using the equipment to remove the spark plug.Then replace the spark plug.In returning the spark plug ,using the equipment you have to twist the spark plug clock wise . Then set the distributor shaft turn it according to the proper firing order that will be set to the spark plug if it is 1,3,4,2. Then the distributor shaft mark will be on 1.If 2,3,4,1 then the distributor shaft mark will be on 2. Then connect the spark plug cable , after connecting the owner have to test start the car so that to if it back fires .If it back fires then the owner have to repeat again the setting of the firing order of the spark plug until it will not back fires.If the owner don't have time to do the job in servicing or changing spark plug then the owner have to go to a car mechanic and let them change the spark plug.

Sep 26, 2009 | 2007 Toyota Camry

2 Answers

2000 nissan xterra knock senor and plug 5


Have you changed all the plugs to platinum and wires? My xterra was doing that and I changed all of them and now it runs great. Also, I changed the distribitor cap and rotor button.

Jun 10, 2009 | 2000 Nissan Xterra

1 Answer

Changing Spark plugs 2005 Colorado


what is involved in changing spark plugs and which type is recommended?

Oct 31, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
1998 Ford Econoline Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...