Question about 2005 Nissan Altima

1 Answer

Put a new fuel pump and spark plug had codes p0113,p0303 and p1122 car turn over kind want to start we think it a fuse or fusible link an friends said it the computer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 672 Answers

P0113 (IAT sensor/circuit faulty)
P0303 (cylinder 3 misfire/random misfire)
P1122 (electric throttle control performance problem)
are you getting fuel and spark at every cylinder?? Were the new plugs gapped??

Posted on May 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2008 Cadillac CTS returning P0303 after replacing spark plug and coil pack


Error Code: P0303
Description:
Cylinder 3 - Misfire Detected
Possible Cause:
Wiring harness, igniter and fuel injector connectors.
Ignition system. (Spark plugs gaps)
Fuel injector No. 3.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression, cylinder No.3. (check valve clearance and throttle plate for excessive wear)
Engine control module (ECM).

Feb 27, 2014 | 2008 Cadillac Cts

1 Answer

My car will not start it cranks but will not turn on. So far I have changed the crank sensor I also have no spark to coil packs or spark plugs Fuel pump does not turn on when I turn the key. What is the...


Begin by checking fuses. Ignition, efi, fuel pump fuses. When key turned to on, do the warning lights and gauges work? That verifies switch has power and is sending power out. With key on, the coil primary wire to coil packs should have voltage.

No spark and no gas? Fuel pump fuse good? I think I would use a test light or multimeter to check that fuel pump fuse terminal has power to it with key on. If that's good, pull connector off at fuel tank and check for a voltage signal on fuel pump wire when the engine is cranking-if good signal, fuel pump needs taken out for replacement or inspection. If no signal check that fuel pump relay has power to it. With key off, pull the relay and check that one terminal has power to it-the feed wire for the pump. If no power signal at all, check maxi fuses or fusible links for a failure.

Sep 04, 2013 | Cars & Trucks

3 Answers

My buddy has a 1988 Jeep Cherokee with the 4.0L. He was driving it home and it started acting like it was running out of gas. Then it died and wouldn't restart. Now the fuel pump will not turn on,


I kind of agree it may be the ecu. but first, look for a green 20amp fusible link, turning into a red wire. Your wiring diagram shows this fusible link is the power source for the fuel pump relay. It is called Fuse Link G. Should be near the battery.

Nov 29, 2012 | 1988 Jeep Cherokee

1 Answer

I put new spark plug and wires ,new battery so what should I do next to make start because it's cold here in chicago


WHEN TROUBLE SHOOT CAR CHECK FOR SPARK AT PLUGS FIRST IF NO.CHECK IGNITION FUSE TO IGNITION COIL OR COILS AND IGNITION MODULE.IF FUSE GOOD CAR NEED SCANNING FOR CRANKSHAFT SENSOR FAULT OR IGNITION MODULE FAULT.IF IGNITION SYSTEM OKAY CHANGE FUEL FILTER IF NOT BEEN CHANGED LONG TIME..CHECK TO SEE IF YOU HEAR FUEL PUMP RUN IN FUEL TANK WHEN YOU TURN IGNITION KEY ON FOR 3 SECONDS.THE FUEL PUMP WILL TURN ON 3 SECONDS THEN TURN OFF.IF YOU HEAR NO FUEL PUMP.CHECK FUSE AND RELAY.IF BOTH GOOD.STILL HAVE CAR CODE SCANNED FIRST.

Jan 24, 2011 | Chevrolet Blazer Cars & Trucks

2 Answers

No power to fuel pump. Turn key on and fuel pump does not work. Fuel pump is new


start small. Did you reconnect the wiring? Have you checked fuses and/or relays? It is most likely a small issue if the pump is new. Make sure all wiring is correct and work up to the fuses/relays. A text light will be your best friend in this particular situation. If there is no power to the relays, you have to work your way from there to your ignition. Good luck. Hope it helps.

Oct 29, 2010 | 1990 Mitsubishi Mighty Max

1 Answer

1990 ford festiva no power to fuel pump. replaced relays , fuel pump, checked safety shutoff. nothing .. ran hot wire to fuel pump and pump worked but car still not trying to start. got spark. now what


The pump should have a fuse in the fuse block. You need to check for power in the fuse block and you need to check power to the pump relay.

Sometimes there is a fusible link to the Relay. If you check the connector terminals for power where the Relay plugs in, you can determine if the fusible link has blown. You could have already replaced the bad parts and now need to restore power to the Relay.

Oct 10, 2010 | 1991 Ford Festiva

1 Answer

I have a 96 cavy z24 battery died but was able to get car home


you may have blown a fuse in a process of remove and install the alternator ( the car was running before that right? )
so check all your fuses and fusible links coming from the starter.
check for spark at spark plugs
check for fuel pressure
these will help you to issolate problems

Mar 29, 2010 | 1996 Chevrolet Cavalier

1 Answer

My 97 chevy cavalier want start with key


sounds like a bad alternator try this list too 1 Inspect Battery Damaged or faulty battery and/or connections. grey_line.gif 2 Inspect Coil - Ignition Damaged or faulty ignition coil or ignition coil circuit. grey_line.gif 3 Inspect Fuel Filter Clogged or dirty fuel filter grey_line.gif 4 Inspect Fuel Injector Pressure Regulator Faulty fuel injector pressure regulator or circuit. grey_line.gif 5 Inspect Fuel Pump Improperly functioning fuel pump or circuits. grey_line.gif 6 Inspect Wireset Damaged, worn, or deteriorating spark plug or coil wire(s). grey_line.gif 7 Inspect Control Module-Ignition Faulty ignition control module or circuit. grey_line.gif 8 Inspect Solenoid Switch Damaged or faulty solenoid switch or solenoid switch circuit. grey_line.gif 9 Inspect Starter Damaged, worn, defective, or faulty starter or starter related circuit. grey_line.gif 10 Inspect Neutral Safety Switch Damaged or faulty neutral safety swittch or circuit. grey_line.gif 11 Inspect Fuse Corroded, burned, or shorted fuse may be interupting power source. grey_line.gif 12 Inspect Fusible Link Corroded, burned, or shorted fusible link may be interupting power source. grey_line.gif 13 Inspect Battery Cable Corroded, broken or poorly connected battery cable. grey_line.gif 14 Inspect Spark Plug Wire Loom - Performance Improperly adjusted or worn/malfunctioning carburetor. grey_line.gif 15 Inspect Distributor Cap Loose or cracked distributor cap grey_line.gif 16 Inspect Distributor Cap And Rotor Kit Loose, cracked, or worn distributor cap and ignition rotor. grey_line.gif 17 Inspect Fuel System Pressure Incorrect fuel pressure being delivered to carburetor or fuel injection system. grey_line.gif 18 Inspect Fuel Injector Plugged, dirty or poorly connected fuel injector. grey_line.gif 19 Inspect Ignition Switch Worn, damaged or faulty ignition switch or circuit. grey_line.gif 20 Inspect Spark Plug Fouled, damaged or broken spark plug(s). grey_line.gif 21 Inspect Belt Incorrectly routed, adjusted(tensioned), missing or worn drive belt(s). grey_line.gif 22 Inspect Timing Belt Slipped or broken timing belt. grey_line.gif 23 Inspect Timing Set Slipped timing chain or worn timing gear(s). grey_line.gif 24 Inspect Fuel Tank Contaminated fuel from rusted or deteriorated fuel tank. grey_line.gif 25 Inspect Ignition Timing Incorrectly adjusted engine timing.

Dec 02, 2008 | 1997 Chevrolet Cavalier

1 Answer

1990 Saab 900 Turbo


Is the knock sensor, mass air flow sensor and all other necessary sensors plugged in? Also there is a hanger bracket on the front of the engine that shares the front two bolts of the intake manifold and there's about 3-4 ground wire terminals that attach to this bracket and the wires come off of the fuel injector wiring harness. I would check these things and any other obvious electrical connections.

Jul 07, 2008 | 1990 Saab 900 Hatchback

Not finding what you are looking for?
2005 Nissan Altima Logo

Related Topics:

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...