Question about 1999 Ford Crown Victoria

1 Answer

How to replace an ac coil on a 99 crown vic - 1999 Ford Crown Victoria

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 70 Answers

Remove the belt and the fan shroud then remove the bolt in the compressor for the clutch, then remove the snap ring holding the pulley on the snout of the compressor, then the coil is pressed on the compressor, and must be pulled straight off to prevent damage to the compressor snout. Then it must be pressed back on , this can be done in the car but typically removal of the compressor is a better plan.

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse for AC blower on a 2004 Ford Crown Victoria


fuse loction for blower motor on a 2004 ford crown vic

Jun 19, 2012 | Ford Crown Victoria Cars & Trucks

1 Answer

I have a 99 crown vic and can't seem to find the


The car is designed not to spin it's wheels when taking off. If you want to make it do that you need to either change the powertrain programming or replace some powertrain parts.

May 07, 2012 | 1999 Ford Crown Victoria

1 Answer

How to fixaciggerate lighter in 99' ford crown vic


check the fuse first, then check the connections at the back of the lighter. very basic electrical circuit

Feb 02, 2012 | 1999 Ford Crown Victoria

1 Answer

Where is the ambient air temp sensor for the 03 crown vic p71


i have a 99 crown vic suvillan and i cant find the ambient air temp sensor where is it please help

Mar 02, 2011 | 2003 Ford Crown Victoria

1 Answer

Trying to locate spark plugs on 99 crown vic police interceptor engine


They should be mounted down in the cylinder heads, you'll need to remove each coil pack. A long extension and 5/8in spark plug socket and an extendable magnet will help. Also, you may need to remove the fuel rail to get to move the coil packs.

Oct 17, 2010 | 2000 Ford Crown Victoria

1 Answer

1999 ford crown vic with ignition coils going bad a lot.


have look at ur wires that is caming from the car in to the coil it self

Mar 10, 2010 | 1999 Ford Crown Victoria

2 Answers

Wiper motor replacement for a 99 crown vic


I replaced the same part on a 1994 Crown Vic. There are a few bolts which go through rubber mounts on the firewall and that is how the wiper motor fits against the firewall. There is a clip on the wiper drive that must be pressed and slid off the wiper shaft. The hardest part was getting clearence between the engine and wiper motor. If I remember there was a way to turn the wiper case to clear the engine. I have asked myself why this was engineered like this? There is nothing important in the way that 3/4" of clearance could have been given for removal.

May 06, 2009 | 1999 Ford Crown Victoria

1 Answer

Bad coil pack on crown vic


well if you have checked the spark plugs and they look good then its probly the coil If the plugs have never been replaced i would start with a tune up and see if this fixes the problem. If not there is no good way for you to test it you would need a computer to hook up to the car

Jan 24, 2009 | 2001 Ford Crown Victoria

2 Answers

Engine light po 300 code


IS THIS A 99 CROWN VIC? IF SO IS IT MISFIRING? IF THIS IS THE CASE YOU MORE THAN LICKLY NEED PLUG WIRES.

Sep 06, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...